AF Hydro

RIDGID TOOLS

Swagelok

管件

Pipe Fittings

pipe fittings

Perlengkapan Pipa

Kelengkapan Paip

อุปกรณ์ท่อ

pipe-fittings

Reduced hex nipple is a threaded type fitting which connects two pipes of different diameter in a straight direction. It provides a straight connection between pipes to support a leak-free system up and smooth operation process. It is used to connect a larger female pipe to a smaller female pipe. This hex nipple has connections of male NPT (tapered) thread with a hexagon nut body in the middle. The hexagon nut body of the hex nipple allows operators or users to easily tighten and loose the fitting using a wrench. Hex nipple is particularly useful in connecting two female pipe ends together. The common application for hex nipple includes in the plumbing, industrial, and automotive industry. 

Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  

The threaded ends ease installation and provide a tighter connection. Welding is not required.

Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.

Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.

To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. 

Remove any excess tape and tighten the joints. 

Do avoid excessive screwing as it may damage the pipe or the fitting. 

Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.

<h3 class="md-block-header-three"><strong class="md-inline-bold">About This Product</strong></h3><p class="md-block-unstyled">Reduced hex nipple is a threaded type fitting which connects two pipes of different diameter in a straight direction. It provides a straight connection between pipes to support a leak-free system up and smooth operation process. It is used to connect a larger female pipe to a smaller female pipe. This hex nipple has connections of male NPT (tapered) thread with a hexagon nut body in the middle. The hexagon nut body of the hex nipple allows operators or users to easily tighten and loose the fitting using a wrench. Hex nipple is particularly useful in connecting two female pipe ends together. The common application for hex nipple includes in the plumbing, industrial, and automotive industry. </p><h3 class="md-block-header-three"><strong class="md-inline-bold">More About #150 Fittings</strong></h3><p class="md-block-unstyled">Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  </p><ul class="md-block-unordered-list-item"><li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li><li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li><li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">How to Connect #150 Fittings?</strong></h3><ol class="md-block-ordered-list-item"><li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. </li><li>Remove any excess tape and tighten the joints. </li><li>Do avoid excessive screwing as it may damage the pipe or the fitting. </li><li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li></ol>

<h3><strong>About This Product</strong></h3>
<p>Reduced hex nipple is a threaded type fitting which connects two pipes of different diameter in a straight direction. It provides a straight connection between pipes to support a leak-free system up and smooth operation process. It is used to connect a larger female pipe to a smaller female pipe. This hex nipple has connections of male NPT (tapered) thread with a hexagon nut body in the middle. The hexagon nut body of the hex nipple allows operators or users to easily tighten and loose the fitting using a wrench. Hex nipple is particularly useful in connecting two female pipe ends together. The common application for hex nipple includes in the plumbing, industrial, and automotive industry.&nbsp;</p>
<h3><strong>More About #150 Fittings</strong></h3>
<p>Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.&nbsp;&nbsp;</p>
<ul>
<li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li>
<li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li>
<li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li>
</ul>
<h3><strong>How to Connect #150 Fittings?</strong></h3>
<ol>
<li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.&nbsp;</li>
<li>Remove any excess tape and tighten the joints.&nbsp;</li>
<li>Do avoid excessive screwing as it may damage the pipe or the fitting.&nbsp;</li>
<li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li>
</ol>


Oleo Tecnica

RFS Hydraulics

Others

BOTHWELL

LAME

Stauff

Flanges

Hydraulic Tools

Pipe Adaptor

Pipe Coupling

Pipe Clamps

Hose Clamp

Stainless Steel Tubes

Ferrule Fittings

Pipe Elbow

Pipe Nipple

Kelvin How

buyerIntroduction

1 1/2" X 1 1/4" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1/2" 1/4" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 1/2 "x pria mengurangi pemasangan pipa puting af hydro keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电 1/4”

1-1-2-x-1-1-4-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

Hex nipple is a threaded type fitting which connects two pipe ends in a straight direction. It provides a straight connection between pipes to support a leak-free system up and smooth operation process. It is also a type of adapter. This hex nipple has connections of male NPT (tapered) thread with a hexagon nut body in the middle. The hexagon nut body of the hex nipple allows operators or users to easily tighten and loose the fitting using a wrench. Hex nipple is particularly useful in connecting two female pipe ends together. The common application for hex nipple includes in the plumbing, industrial, and automotive industry.    

Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.  

<p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">About This Product</strong></h3><p class="md-block-unstyled">Hex nipple is a threaded type fitting which connects two pipe ends in a straight direction. It provides a straight connection between pipes to support a leak-free system up and smooth operation process. It is also a type of adapter. This hex nipple has connections of male NPT (tapered) thread with a hexagon nut body in the middle. The hexagon nut body of the hex nipple allows operators or users to easily tighten and loose the fitting using a wrench. Hex nipple is particularly useful in connecting two female pipe ends together. The common application for hex nipple includes in the plumbing, industrial, and automotive industry.    </p><h3 class="md-block-header-three"><strong class="md-inline-bold">More About #150 Fittings</strong></h3><p class="md-block-unstyled">Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  </p><ul class="md-block-unordered-list-item"><li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li><li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li><li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">How to Connect #150 Fittings?</strong></h3><ol class="md-block-ordered-list-item"><li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. </li><li>Remove any excess tape and tighten the joints. </li><li>Do avoid excessive screwing as it may damage the pipe or the fitting. </li><li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.  </li></ol>

<p>&nbsp;</p>
<h3><strong>About This Product</strong></h3>
<p>Hex nipple is a threaded type fitting which connects two pipe ends in a straight direction. It provides a straight connection between pipes to support a leak-free system up and smooth operation process. It is also a type of adapter. This hex nipple has connections of male NPT (tapered) thread with a hexagon nut body in the middle. The hexagon nut body of the hex nipple allows operators or users to easily tighten and loose the fitting using a wrench. Hex nipple is particularly useful in connecting two female pipe ends together. The common application for hex nipple includes in the plumbing, industrial, and automotive industry.&nbsp;&nbsp;&nbsp;&nbsp;</p>
<h3><strong>More About #150 Fittings</strong></h3>
<p>Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.&nbsp;&nbsp;</p>
<ul>
<li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li>
<li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li>
<li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li>
</ul>
<h3><strong>How to Connect #150 Fittings?</strong></h3>
<ol>
<li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.&nbsp;</li>
<li>Remove any excess tape and tighten the joints.&nbsp;</li>
<li>Do avoid excessive screwing as it may damage the pipe or the fitting.&nbsp;</li>
<li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.&nbsp;&nbsp;</li>
</ol>


1/2"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

1/2"npt stainless steel ss316 hex nipple pipe fitting 150psi 1/2 "npt pipa puting af hydro keluli tahan karat paip 不锈钢 六角螺纹管接头 af水电

1-2-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

<h3 class="md-block-header-three"><strong class="md-inline-bold">About This Product</strong></h3><p class="md-block-unstyled">Hex nipple is a threaded type fitting which connects two pipe ends in a straight direction. It provides a straight connection between pipes to support a leak-free system up and smooth operation process. It is also a type of adapter. This hex nipple has connections of male NPT (tapered) thread with a hexagon nut body in the middle. The hexagon nut body of the hex nipple allows operators or users to easily tighten and loose the fitting using a wrench. Hex nipple is particularly useful in connecting two female pipe ends together. The common application for hex nipple includes in the plumbing, industrial, and automotive industry.    </p><h3 class="md-block-header-three"><strong class="md-inline-bold">More About #150 Fittings</strong></h3><p class="md-block-unstyled">Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  </p><ul class="md-block-unordered-list-item"><li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li><li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li><li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">How to Connect #150 Fittings?</strong></h3><ol class="md-block-ordered-list-item"><li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. </li><li>Remove any excess tape and tighten the joints. </li><li>Do avoid excessive screwing as it may damage the pipe or the fitting. </li><li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.  </li></ol>

<h3><strong>About This Product</strong></h3>
<p>Hex nipple is a threaded type fitting which connects two pipe ends in a straight direction. It provides a straight connection between pipes to support a leak-free system up and smooth operation process. It is also a type of adapter. This hex nipple has connections of male NPT (tapered) thread with a hexagon nut body in the middle. The hexagon nut body of the hex nipple allows operators or users to easily tighten and loose the fitting using a wrench. Hex nipple is particularly useful in connecting two female pipe ends together. The common application for hex nipple includes in the plumbing, industrial, and automotive industry.&nbsp;&nbsp;&nbsp;&nbsp;</p>
<h3><strong>More About #150 Fittings</strong></h3>
<p>Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.&nbsp;&nbsp;</p>
<ul>
<li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li>
<li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li>
<li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li>
</ul>
<h3><strong>How to Connect #150 Fittings?</strong></h3>
<ol>
<li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.&nbsp;</li>
<li>Remove any excess tape and tighten the joints.&nbsp;</li>
<li>Do avoid excessive screwing as it may damage the pipe or the fitting.&nbsp;</li>
<li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.&nbsp;&nbsp;</li>
</ol>


1 1/4"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

1/4"npt stainless steel ss316 hex nipple pipe fitting 150psi 1/4 "npt pipa puting af hydro keluli tahan karat paip 不锈钢 六角螺纹管接头 af水电

1-1-4-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

2" X 1 1/4" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

2" 1/4" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi "x pria mengurangi pemasangan pipa puting af hydro 1/4” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

2-x-1-1-4-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

3"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

3"npt stainless steel ss316 hex nipple pipe fitting 150psi "npt pipa puting af hydro keluli tahan karat pemasangan paip 不锈钢 六角螺纹管接头 af水电

3-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

<p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">About This Product</strong></h3><p class="md-block-unstyled">Reduced hex nipple is a threaded type fitting which connects two pipes of different diameter in a straight direction. It provides a straight connection between pipes to support a leak-free system up and smooth operation process. It is used to connect a larger female pipe to a smaller female pipe. This hex nipple has connections of male NPT (tapered) thread with a hexagon nut body in the middle. The hexagon nut body of the hex nipple allows operators or users to easily tighten and loose the fitting using a wrench. Hex nipple is particularly useful in connecting two female pipe ends together. The common application for hex nipple includes in the plumbing, industrial, and automotive industry. </p><h3 class="md-block-header-three"><strong class="md-inline-bold">More About #150 Fittings</strong></h3><p class="md-block-unstyled">Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  </p><ul class="md-block-unordered-list-item"><li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li><li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li><li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">How to Connect #150 Fittings?</strong></h3><ol class="md-block-ordered-list-item"><li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. </li><li>Remove any excess tape and tighten the joints. </li><li>Do avoid excessive screwing as it may damage the pipe or the fitting. </li><li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li></ol>

<p>&nbsp;</p>
<h3><strong>About This Product</strong></h3>
<p>Reduced hex nipple is a threaded type fitting which connects two pipes of different diameter in a straight direction. It provides a straight connection between pipes to support a leak-free system up and smooth operation process. It is used to connect a larger female pipe to a smaller female pipe. This hex nipple has connections of male NPT (tapered) thread with a hexagon nut body in the middle. The hexagon nut body of the hex nipple allows operators or users to easily tighten and loose the fitting using a wrench. Hex nipple is particularly useful in connecting two female pipe ends together. The common application for hex nipple includes in the plumbing, industrial, and automotive industry.&nbsp;</p>
<h3><strong>More About #150 Fittings</strong></h3>
<p>Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.&nbsp;&nbsp;</p>
<ul>
<li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li>
<li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li>
<li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li>
</ul>
<h3><strong>How to Connect #150 Fittings?</strong></h3>
<ol>
<li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.&nbsp;</li>
<li>Remove any excess tape and tighten the joints.&nbsp;</li>
<li>Do avoid excessive screwing as it may damage the pipe or the fitting.&nbsp;</li>
<li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li>
</ol>


2" X 1/2" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

2" 1/2" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi "x pria mengurangi pemasangan pipa puting af hydro 1/2” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

2-x-1-2-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

1 1/2" X 3/4" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1/2" 3/4" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 1/2 "x pria mengurangi pemasangan pipa puting af hydro keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电 3/4”

1-1-2-x-3-4-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

1/2" X 3/8" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1/2" 3/8" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 1/2 "x pria mengurangi pemasangan pipa puting af hydro 1/2” 3/8” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

1-2-x-3-8-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

<h3 class="md-block-header-three"><strong class="md-inline-bold"> Ridgid 51035 Insert, Nipple Chuck</strong></h3><ul class="md-block-unordered-list-item"><li>For use with 819 Nipple Chuck</li></ul><p class="md-block-unstyled"> </p>

<h3><strong> Ridgid 51035 Insert, Nipple Chuck</strong></h3>
<ul>
<li>For use with 819 Nipple Chuck</li>
</ul>
<p>&nbsp;</p>


Gan Hui Peng

Ridgid 51035 Insert, Nipple Chuck

ridgid 51035 insert, nipple chuck sisipan 51035, pipe puting pipa tools paip tools/里奇工具 插入件，奶嘴夹头 里奇工具

ridgid-51035-insert-nipple-chuck

Cleaning Process	Standard Cleaning and Packaging (SC-10)

<h3 class="md-block-header-three"><strong class="md-inline-bold">Swagelok SS-4-HLN-4 Nipple Pipe</strong></h3><p class="md-block-unstyled">Body Material	316 Stainless Steel</p><p class="md-block-unstyled">Cleaning Process	Standard Cleaning and Packaging (SC-10)</p><p class="md-block-unstyled">Connection 1 Size	1/4 in.</p><p class="md-block-unstyled">Connection 1 Type	Male NPT</p><p class="md-block-unstyled">Connection 2 Size	1/4 in.</p><p class="md-block-unstyled">Connection 2 Type	Male NPT</p><p class="md-block-unstyled">Feature	Length 4&quot;</p><p class="md-block-unstyled">Flow Restrictor	No</p><p class="md-block-unstyled">Length	4 in. (10.2 cm)</p>

<h3><strong>Swagelok SS-4-HLN-4 Nipple Pipe</strong></h3>
<p>Body Material	316 Stainless Steel</p>
<p>Cleaning Process	Standard Cleaning and Packaging (SC-10)</p>
<p>Connection 1 Size	1/4 in.</p>
<p>Connection 1 Type	Male NPT</p>
<p>Connection 2 Size	1/4 in.</p>
<p>Connection 2 Type	Male NPT</p>
<p>Feature	Length 4"</p>
<p>Flow Restrictor	No</p>
<p>Length	4 in. (10.2 cm)</p>


WEICON

Nietz

Pilot

Picasaf

Fellowes

DEVCON

Philips

BELZONA

Whatman

Writing Materials

Adhesive Glue

Epoxy

Degreasers

Threadlocker

Anti Rust Coating & Lubricant

Lubricants

Combination Spanners

Other Tools

Sealants

Darius Ong 

Swagelok SS-4-HLN-4 Nipple Pipe

swagelok ss-4-hln-4 nipple pipe pipa puting paip swagelok/世伟洛克 螺纹接头管 世伟洛克

swagelok-ss-4-hln-4-nipple-pipe

3/4" X 1/4" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

3/4" 1/4" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi mengurangi puting pipa af hydro keluli tahan karat lelaki kurangkan pemasangan paip hydro/af水电 外螺纹不锈钢 异径六角接头管件 af水电

3-4-x-1-4-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

1" X 1/2" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1" 1/2" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi "x pria mengurangi pemasangan pipa puting af hydro 1/2” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

1-x-1-2-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

3/8"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

3/8"npt stainless steel ss316 hex nipple pipe fitting 150psi 3/8 "npt pipa puting af hydro 3/8" keluli tahan karat npt pemasangan paip 不锈钢 六角螺纹管接头 af水电

3-8-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

1 1/2" X 1/2" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1/2" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 1/2 "x pria mengurangi pemasangan pipa puting af hydro keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电 1/2”

1-1-2-x-1-2-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

2" X 1" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

2" 1" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi "x pria mengurangi pemasangan pipa puting af hydro 1” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

2-x-1-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

1" X 3/4" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1" 3/4" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi "x pria mengurangi pemasangan pipa puting af hydro 3/4” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

1-x-3-4-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

3/4" X 1/2" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

3/4" 1/2" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 3/4 "x pria mengurangi pemasangan pipa puting af hydro 3/4” 1/2” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

3-4-x-1-2-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

3/4" X 3/8" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

3/4" 3/8" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 3/4 "x pria mengurangi pemasangan pipa puting af hydro 3/4” 3/8” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

3-4-x-3-8-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

The 34177R nipple chuck holds 3" BSPT pipe by the thread on the 1224 threading machine. 

The chuck prevents the machine jaw from damaging the pipe thread during the process. 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Ridgid 34177R Chuck, 419 Nipple 3&quot; Bspt</strong></h3><ul class="md-block-unordered-list-item"><li>The 34177R nipple chuck holds 3&quot; BSPT pipe by the thread on the 1224 threading machine. </li><li>The chuck prevents the machine jaw from damaging the pipe thread during the process. </li></ul>

<h3><strong>Ridgid 34177R Chuck, 419 Nipple 3" Bspt</strong></h3>
<ul>
<li>The 34177R nipple chuck holds 3" BSPT pipe by the thread on the 1224 threading machine.&nbsp;</li>
<li>The chuck prevents the machine jaw from damaging the pipe thread during the process.&nbsp;</li>
</ul>


Ridgid 34177R Chuck, 419 Nipple 3" Bspt

ridgid 34177r chuck, 419 nipple 3" bspt chuck 34177r, puting pipe pipa tools paip tools/里奇工具 卡盘，419 螺纹接头 英寸英制 里奇工具

ridgid-34177r-chuck-419-nipple-3-bspt

2" X 3/4" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

2" 3/4" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi "x pria mengurangi pemasangan pipa puting af hydro 3/4” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

2-x-3-4-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

2 1/2"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

2-1-2-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

1/8"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

1/8"npt stainless steel ss316 hex nipple pipe fitting 150psi 1/8 "npt pipa puting af hydro 1/8" keluli tahan karat npt pemasangan paip 不锈钢 六角螺纹管接头 af水电

1-8-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

1 1/2" X 1" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1/2" 1" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 1/2 "x pria mengurangi pemasangan pipa puting af hydro keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电 1”

1-1-2-x-1-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

1/4"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

1/4"npt stainless steel ss316 hex nipple pipe fitting 150psi 1/4 "npt pemasangan pipa puting af hydro keluli tahan karat paip 不锈钢 六角管接头 af水电

1-4-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

<h3 class="md-block-header-three"><strong class="md-inline-bold">Swagelok SS-8-HN Nipple Tube</strong></h3><p class="md-block-unstyled">Body Material	316 Stainless Steel</p><p class="md-block-unstyled">Cleaning Process	Standard Cleaning and Packaging (SC-10)</p><p class="md-block-unstyled">Connection 1 Size	1/2 in.</p><p class="md-block-unstyled">Connection 1 Type	Male NPT</p><p class="md-block-unstyled">Connection 2 Size	1/2 in.</p><p class="md-block-unstyled">Connection 2 Type	Male NPT</p><p class="md-block-unstyled">Flow Restrictor	No</p>

<h3><strong>Swagelok SS-8-HN Nipple Tube</strong></h3>
<p>Body Material	316 Stainless Steel</p>
<p>Cleaning Process	Standard Cleaning and Packaging (SC-10)</p>
<p>Connection 1 Size	1/2 in.</p>
<p>Connection 1 Type	Male NPT</p>
<p>Connection 2 Size	1/2 in.</p>
<p>Connection 2 Type	Male NPT</p>
<p>Flow Restrictor	No</p>


Swagelok SS-8-HN Nipple Tube

swagelok ss-8-hn nipple tube tabung puting pipe pipa tiub paip swagelok/世伟洛克 螺纹接头管 世伟洛克

swagelok-ss-8-hn-nipple-tube

3/8" X 1/8" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

3/8" 1/8" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 3/8 "x pria mengurangi pemasangan pipa puting af hydro 3/8” 1/8” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

3-8-x-1-8-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

1/2" X 1/4" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1/2" 1/4" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 1/2 "x pria mengurangi pemasangan pipa puting af hydro 1/2” 1/4” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

1-2-x-1-4-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

3/4"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

3/4"npt stainless steel ss316 hex nipple pipe fitting 150psi 3/4 "npt pipa puting af hydro keluli tahan karat paip 不锈钢 六角螺纹管接头 af水电

3-4-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

<h3 class="md-block-header-three"><strong class="md-inline-bold">Ridgid 46840 Fitting, 90 Deg</strong></h3><p class="md-block-unstyled"> RIDGID 46840 FITTING, 90 DEG </p>

<h3><strong>Ridgid 46840 Fitting, 90 Deg</strong></h3>
<p>&nbsp;RIDGID 46840 FITTING, 90 DEG&nbsp;</p>


Allen 

Fong Siew Sen

Facom

Proto

Pelican

OptiMax

PROTOOLS

Impact Sockets

Open End Spanners

Socket Sets

Screwdrivers

Ring Spanners

Screwdriver Bits & Bit Set

Torque Wrenches

Tap & Die Wrenches

ALLEN Chiang

Ridgid 46840 Fitting, 90 Deg

ridgid 46840 fitting, 90 deg pemasangan 46840, derajat pipe nipple puting pipa tools pemasangan, paip tools/里奇工具 配件，90 里奇工具

ridgid-46840-fitting-90-deg

2"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

2"npt stainless steel ss316 hex nipple pipe fitting 150psi "npt pipa puting af hydro keluli tahan karat pemasangan paip 不锈钢 六角螺纹管接头 af水电

2-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

1 1/4" X 1" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1/4" 1" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 1/4 "x pria mengurangi pemasangan pipa puting af hydro keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电 1”

1-1-4-x-1-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

1 1/4" X 3/4" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1/4" 3/4" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi 1/4 "x pria mengurangi pemasangan pipa puting af hydro keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电 3/4”

1-1-4-x-3-4-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

1 1/2"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

1-1-2-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

4"NPT Stainless Steel SS316 Hex Nipple Pipe Fitting 150 Psi

4"npt stainless steel ss316 hex nipple pipe fitting 150psi "npt pipa puting af hydro keluli tahan karat paip 不锈钢 六角接头管件 af水电

4-npt-stainless-steel-ss316-hex-nipple-pipe-fitting-150-psi

1" X 1/4" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

1" 1/4" npt male stainless steel ss316 reduce hex nipple pipe fitting 150psi "x pria mengurangi pemasangan pipa puting af hydro 1/4” keluli tahan karat lelaki kurangkan paip 外螺纹不锈钢 减少六角螺纹管接头 af水电

1-x-1-4-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi

2" X 1 1/2" Npt Male Stainless Steel SS316 Reduce Hex Nipple Pipe Fitting 150 Psi

2-x-1-1-2-npt-male-stainless-steel-ss316-reduce-hex-nipple-pipe-fitting-150-psi