The hardness tester can be used to quickly check the hardness of components even when they are installed. The hardness tester impresses with its large measuring range, easy handling, robust design and temperature resistance down to -20°C. In addition to the hardness in Rockwell, Brinell and Vickers, the hardness tester can also be used to determine the tensile strength of steels up to 1740 MPa. The hardness tester has a manual test probe with a test force of 50N as standard, with this probe it is possible to measure from all directions in space without a correction factor.

Key Features :

• Large colour display with bright backlight.
• Stable operation under difficult climatic conditions.
• Extended temperature range (frost-proof down to -20 °C).
• For long-term operation under field and workshop conditions, the instrument is designed in a dust proof housing.
• Rubber buffers protect the unit from accidental shocks or falls from a height of up to 5 m, while the unit remains fully functional.
• 2 detachable probes: Ultrasonic contact impedance (UCI) and dynamic rebound (Leeb).
• One-point calibration function (type calibration)
• The unit has the functions of displaying the minimum, maximum and average hardness values, the function of filtering out of range false readings.
• The function of simultaneous display of 20 measurements in a series enables the analysis of the with a large number of measurements and significantly increases the speed of processing the results of the results considerably.
• Function to create diagrams for a series of measurements helps visualise the hardness measurement over the entire surface of a dimensionally stable product.
• For expert work to achieve maximum accuracy, it is possible to set the sensitivity coefficient and to adjust the signal processing of the probe.
• The automatic storage of all measurements avoids data loss and allows, if necessary, an analysis of the data after a longer period of time.
• The storage of the calibration in the memory of the UCI probe allows a quick exchange of the sensor without having to return the unit to the manufacturer for factory calibration in the event of a defect.
• Keypad allows quick data entry of hardness scales
• Intuitive menu
• High accuracy and speed of measurements
• Wide range of hardness values
• Internal memory for up to 500 user hardness calibrations and PC communication
• Small indenter imprint (suitable for mirrored shaft necks, blades, gear teeth, etc.)
• Hardness measurement of products with any mass, configuration, structure, degree of mechanical and heat treatment
• Hardness measurement of surface hardened layers
• Hardness determination of products with a thickness of more than 1 mm (small parts, steel sheets, thin-walled constructions, pipes, containers, products with complex shape, determination of the hardness of metal coatings, etc.) using special probes with reduced load energy.
• A wide functionality allows the user to choose the measuring scale according to Rockwell, Vickers, Brinell or Shore, the conversion scale and the number of measurements.
• An intelligent averaging mode, unique statistical processing system and flexible memory organisation allow the most convenient hardness measurement.
• All measurements are stored with date and time. The results can be displayed in the form of displayed in the form of tables and diagrams, allowing a detailed analysis of the values obtained.
• High quality probes, modern element base and processor.
• Built-in rechargeable battery allows continuous operation for approx. 9 hours and is charged via USB cable recharged.

Includes :

• 1 x UCI Hardness Tester PCE-3000ULS
• 1 x UCI measuring probe
• 1 x Rebound probe type D
• 1 x charger
• 1 x USB cable
• 1 x Carrying case
• 1 x instruction manual