Schneider Electric METSEPM2230 Easylogic PM2230, Power & Energy Meter, up to the 31st Harmonic, Lcd Display, RS485, Class 0.5S

Malaysia

Search Keyword, Item or Model

Press

to jump to the search box

Shopping List

Cart

AUD - AU$

Home

All Categories

Other Test & Measurement

Power & Energy Meters

Schneider Electric METSEPM2230 Easylogic PM2230, Power & Energy Meter, up to the 31st Harmonic, Lcd Display, RS485, Class 0.5S

View Brand

Schneider Electric METSEPM2230 Easylogic PM2230, Power & Energy Meter, up to the 31st Harmonic, Lcd Display, RS485, Class 0.5S

Brand:	SCHNEIDER ELECTRIC
Model:	METSEPM2230

Specifications

View other Power & Energy Meters dimensions or variations

Range

EasyLogic

[In] Rated Current

5 A 1 A

Type of Measurement

Apparent power min/max, total Active and reactive power min/max, total Current min/max, avg Voltage min/max, avg Frequency min/max, avg Total current harmonic distortion THD (I) per phase Total voltage harmonic distortion THD (U) per phase Power factor min/max, avg Apparent energy total Active and reactive energy total

Display Type

Backlit LCD

Ambient Air Temperature for Operation

-10…60 °C

Width

96 mm

Material

Polycarbonate

Control Type

4 x button

Local Signalling

Red LED: output signal 1...9999000 pulse/ k_h (kWh, kVAh, kVARh) Green LED: module operation and integrated communication

Device Short Name

PM2230

Product or Component Type

Power meter

Product Name

EasyLogic PM2200

Depth

76.09 mm total: 61.64 mm embedded:

Device Application

Power monitoring Sub billing

Mounting Support

Framework

Height

96 mm

Mounting Mode

Clip-on

Accuracy class

Class 1 reactive energy conforming to IEC 62053-24 Class 0.5S active energy conforming to IEC 62053-22 Class 5 harmonic distorsion (I THD & U THD)

Network Frequency

60 Hz 50 Hz

Sampling rate

64 samples/cycle

Measurement current

5…6000 mA

Communication Port Protocol

Modbus RTU at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none - 2 wires, insulation 2500 V

Communication port support

Screw terminal block: RS485

Connections - Terminals

Current transformer: screw connection (bottom) 6 Voltage inputs: screw connection (top) 4

Overvoltage Category

III

Product certifications

CE conforming to IEC 61010-1 CULus conforming to UL 61010-1 CULus conforming to CSA C22.2 No 61010-1 RCM EAC C-Tick

IP Degree of Protection

IP54 front: conforming to IEC 60529 IP30 body: conforming to IEC 60529

Pollution Degree

Relative Humidity

5…95 % at 50 °C

Ambient Air Temperature for Storage

-25…70 °C

Operating Altitude

<= 2000 m

Power quality analysis

total harmonic distortion up to the 31st harmonic

Maximum power consumption in VA

8 VA at 277 V AC

Ride-through time

50 ms 120 V AC typical 50 ms 230 V AC typical 50 ms 125 V DC typical

Display resolution

128 x 128 pixels

Measurement voltage

35…480 V AC 50/60 Hz between phases 20…277 V AC 50/60 Hz between phase and neutral 480…999000 V AC 50/60 Hz with external VT

Frequency measurement range

45…65 Hz

Measurement accuracy

Apparent power +/- 0.5 % Active energy +/- 0.5 % Reactive energy +/- 1 % Active power +/- 0.5 % Voltage +/- 0.5 % Power factor +/- 0.01 Current +/- 0.5 % Frequency +/- 0.05 %

data recording

Energy consumption logs Power logs Time stamping Min/max for 8 parameters

Electromagnetic Compatibility

Electrostatic discharge conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 Surge immunity test conforming to IEC 61000-4-5 Conducted RF disturbances conforming to IEC 61000-4-6 Magnetic field at power frequency conforming to IEC 61000-4-8 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 Emission tests conforming to FCC part 15 class A

Information displayed

Demand current (past value) Demand current (present value) Demand power (past value) Demand power (present value) Voltage Current Frequency Energy consumption Harmonic distortion Power factor Active power Apparent power Reactive power Unbalanced in % Harmonic amplitude

Flame retardance

V-0 conforming to UL 94

Metering type

Calculated neutral current Active power P, P1, P2, P3 Current I, I1, I2, I3 Peak demand power PM, QM, SM Voltage U, U21, U32, U13, V, V1, V2, V3 Peak demand currents Reactive power Q, Q1, Q2, Q3 Demand power P, Q, S Unbalance current Active, reactive, apparent energy (signed, four quadrant) Apparent power S, S1, S2, S3

Measurement category

Category III 480 V Category II 480…600 V

Maximum power consumption in W

3.3 W (power lines (AC)) 3.3 W at 277 V (power lines (DC))

Compatibility Code

PM2230

[Us] Rated Supply Voltage

80...277 V AC 45...65 Hz +/- 10 % 100...277 V DC +/- 10 %

Mounting position

Vertical

input impedance

Current (impedance <= 0.3 mOhm) Voltage (impedance > 5 MOhm)