Kyoritsu 2413R Leakage Clamp Meters

• Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.

• True RMS enables an accurate measurement for distorted waveforms.

• Measurement from mA up to AC 1000A

• Frequency filter switch to eliminate the effect of the harmonics.

• 2 way analogue output terminal

• Resolution 0.1mA

AC A

(50/60HZ) 200mA/2/20/200/1000A

±2.5%rdg±5dgt (200mA/2/20A)

±3.0%rdg±5dgt (200A, 0 – 500A)

±5.5%rdg (501 – 1000A)

AC A (WIDE)

200mA/2/20/200/1000A

±1.8%rdg±5dgt (50/60Hz) (200mA/2/20A)

±2.0%rdg±5dgt (50/60Hz) (200A, 0 – 500A)

±5.0%rdg (50/60Hz) (501 – 1000A)

CREST FACTOR

3.0 or less

CONDUCTOR SIZE

Ø68mm max.

FREQUENCY RESPONSE

40Hz – 1kHz

OUTPUT

Waveform :

AC200mV against the maximum value of each range (1000A range is 100mV)

Recorder :

DC200mV against the maximum value of each range (1000A range is 100mV)

APPLICABLE STANDARDS

IEC 61010-1 CAT III 300V Pollution degree 2

IEC 61010-2-032

POWER SOURCE

6F22 (9V) × 1 *Continuous measuring time: Approx. 60 hours

DIMENSIONS

250(L) × 130(W) × 50(D)mm

WEIGHT

Approx. 570g (including battery)

INCLUDED ACCESSORIES

9094 (Carrying Case)

6F22 × 1

Instruction Manual