Multi M-730CE AC/DC Clamp Miliammeter

• Withstanding Voltage: AC 3700V/1 minute between CT and outer case
• Storage Temperature: -10～60℃, < 70%RH (without condensation)

DC Current

• Accuracy (23℃±5℃, less than 85%RH):
• Range/Measuring Range/Resolution/Accuracy
• 100mA: 0.1～±99.99mA / 0.01mA / ±1%rdg±10dgt
• 1000mA: 1～±300mA / 0.1mA / ±1%rdg±10dgt
• 1000mA: ±300.1～±700mA / 0.1mA / ±2%rdg±10dgt
• 1000mA: ±700.1～±999.9mA / 0.1mA / ±3%rdg±10dgt
• Influence of terrestrial magnetism: Less than ±2.0mA
• Influence of magnetization: Less than ±2.0mA by DC 1.5A on/off
• Influence of CT opening and closing: Less than ±1.0mA
• Max. input current: DC 1.5A

AC Current

• Accuracy (23℃±5℃, less than 85%RH):
  
• Range/Measuring Range/Resolution/Accuracy
• 100mA: 0～99.99mA / 0.01mA / ±2%rdg±10dgt (50/60Hz)
• 1000mA: 0～999.9mA / 0.1mA / ±2%rdg±10dgt (50/60Hz)
• 10A: 0～9.999A / 0.001A / ±1%rdg±10dgt (50/60Hz)
• Max. input current: AC 20A
• Operating Temperature: 0～50℃, < 85%RH (without condensation)
• Power supply: LR6, AM-3 or AA size battery×4
• Dimension:
  
• Main unit: 78(W)×155(H)×32(D)mm, Approx. 280g
• CT (CTP-30DC): 1.2m lead, Approx. 165g
• AC Conversion: Average sensing rms reading
• Safety standard: IEC61010-1, IEC61010-2-032 CATⅡ 600V or CATⅢ 300V
• Jaw opening capability: 30mmφ
• Limitation of circuit voltage: Less than AC/DC 600V
• Accessories: Carrying case, Batteries, Instruction manual
• Current Consumption: Approx. 9mA (Approx. 200 hours continuous)
• Option: Cable for recorder
• Sampling rate: 1 time/sec. for DC and 6 times/sec. for AC
• Display: Max. 2000 count on LCD with annunciators
• Measuring function: AC/DC leakage current
• A/D Conversion: Dual slope integration method
• Over range indication: "OL" mark on LCD
• Data hold indication: "DH" mark on LCD
• Low battery indication: "Battery" mark on LCD
• Analog signal output: DC 100mV full scale to each range (Output impedance: less than 10kΩ)
• Auto power off: Approx. 10 minutes after last switch operation (Auto power off function can be released by the switch)
• Measuring method: Clamp type CT
• Zero adjustment: For DC current range by "0 ADJ" switch