- Powers the tester via USB cable.
- Recharges internal Nimh battery.
- Allows communication with computer for downloading torque readings via communication port on computer. Use with JH6000SW.
- An extensive two-way communication command set (ASCII text commands) that can control the tester remotely, from a computer, using any third party communication program (including Hyperterminal).
- Set target torque remotely.
- Set units remotely.
- Set target tolerance remotely.
- Set mode (track, peak, first peak) remotely.
- Query torque value remotely.
- Clear the display remotely.
- Get (call) torque value remotely by sending a carriage return to tester.
- 100 torque reading memory (torque value saved to memory when save key is pressed on keypad).
Specifications
Drive Size [in] 1/4
Increments [Ft Lbs] 0.01
Increments [In Lbs] 0.01
Torque Range [Ft Lbs] 0.42-4.17
Torque Range [In Lbs] 5-50
Torque Range [Nm] 0.56-5.65
Increments [Nm] 0.01
Width [in] 6
Height [in] 4-1/2
Maximum Torque [Nm] 5.65
Minimum Torque [Nm] 0.56
Overall Length [in] 6
Weight [Lbs] 6.00
Style Electronic
Specification ASME ASME B107.29