- Powers the tester via USB cable.
- Recharges internal Nimh battery.
- Allows communication with computer for downloading torque readings via communication port on computer. Use with JH6000SW.
- An extensive two-way communication command set (ASCII text commands) that can control the tester remotely, from a computer, using any third party communication program (including Hyperterminal).
- Set target torque remotely.
- Set units remotely.
- Set target tolerance remotely.
- Set mode (track, peak, first peak) remotely.
- Query torque value remotely.
- Clear the display remotely.
- Get (call) torque value remotely by sending a carriage return to tester.
- 100 torque reading memory (torque value saved to memory when save key is pressed on keypad).
Specifications
DRIVE SIZE [IN]3/4
INCREMENTS [FT LBS]0.1
INCREMENTS [IN LBS]1
TORQUE RANGE [FT LBS]60-600
TORQUE RANGE [IN LBS]720-7200
TORQUE RANGE [NM] 81.3-813
INCREMENTS [NM]0.1
WIDTH [IN]6
HEIGHT [IN]4-1/2
MAXIMUM TORQUE [NM]813
MINIMUM TORQUE [NM]81.3
OVERALL LENGTH [IN]6
WEIGHT [LBS]6.00
STYLE Electronic
SPECIFICATION ASME ASME B107.29