Schneider Electric ATV212HU75N4 Variable Speed Drive ATV212 - 7.5kW - 10hp - 480V - 3ph - Emc - IP21

Malaysia

Search Keyword, Item or Model

Press

to jump to the search box

Shopping List

Cart

USD - US$

Schneider Electric ATV212HU75N4 Variable Speed Drive ATV212 - 7.5kW - 10hp - 480V - 3ph - Emc - IP21

View Brand

Schneider Electric ATV212HU75N4 Variable Speed Drive ATV212 - 7.5kW - 10hp - 480V - 3ph - Emc - IP21

Brand:	SCHNEIDER ELECTRIC
Model:	ATV212HU75N4

Specifications

View other Inverter Drives dimensions or variations

Local Signalling

1 LED (red) for DC bus energized

Range of Product

Altivar 212

Accuracy

+/- 0.6 % (VIA) for a temperature variation 60 °C +/- 0.6 % (VIB) for a temperature variation 60 °C +/- 1 % (FM) for a temperature variation 60 °C

Standard

IEC 61800-3 IEC 61800-3 environments 1 category C1 IEC 61800-3 category C3 IEC 61800-5-1 IEC 61800-3 category C2 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 1 category C2 IEC 61800-3 category C2 EN 61800-3 category C3 IEC 61800-3 environments 2 category C3 IEC 61800-3 environments 1 category C3 UL Type 1 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 2 category C1 EN 55011 class A group 1 IEC 61800-3 environments 2 category C1 IEC 61800-5-1 IEC 61800-3 environments 2 category C3 IEC 61800-3 IEC 61800-3 environments 1 category C1

IP Degree of Protection

IP20 on upper part without blanking plate on cover conforming to IEC 61800-5-1 IP20 on upper part without blanking plate on cover conforming to IEC 60529 IP21 conforming to IEC 61800-5-1 IP21 conforming to IEC 60529 IP41 on upper part conforming to IEC 61800-5-1 IP41 on upper part conforming to IEC 60529

Ambient Air Temperature for Operation

-10…40 °C (without derating) 40…50 °C (with derating factor)

Ambient Air Temperature for Storage

-25…70 °C

Operating Altitude

1000...3000 m limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m <= 1000 m without derating

Vibration Resistance

1.5 mm (f= 3…13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-8

[Us] Rated Supply Voltage

380...480 V - 15...10 %

Supply Frequency

50...60 Hz - 5...5 %

Switching Frequency

6...16 kHz adjustable 12...16 kHz with derating factor

Noise Level

51 dB conforming to 86/188/EEC

Transmission Rate

9600 bps or 19200 bps

Power Dissipation in W

291 W

Sampling Duration

2 ms +/- 0.5 ms F discrete 2 ms +/- 0.5 ms R discrete 2 ms +/- 0.5 ms RES discrete 3.5 ms +/- 0.5 ms VIA analog 22 ms +/- 0.5 ms VIB analog

Continuous Output Current

16 A at 380 V 16 A at 460 V

Line Current

11.7 A at 480 V 14.7 A at 380 V

Apparent Power

12.2 kVA at 380 V

Maximum Transient Current

17.6 A for 60 s

Linearity Error

VIA: +/- 0.15 % of maximum value for input VIB: +/- 0.15 % of maximum value for input FM: +/- 0.2 % for output

Width

180 mm

Device Short Name

ATV212

Product or Component Type

Variable speed drive

Depth

170 mm

Height

232 mm

Network Frequency

47.5...63 Hz

Pollution Degree

3 conforming to IEC 61800-5-1

Relative Humidity

5…95 % without condensation conforming to IEC 60068-2-3 5…95 % without dripping water conforming to IEC 60068-2-3

Marking

Environmental Characteristic

Classes 3C1 conforming to IEC 60721-3-3 Classes 3S2 conforming to IEC 60721-3-3

Analog Input Type

VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits VIB configurable PTC probe: 0...6 probes, impedance: 1500 Ohm VIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits

Electromagnetic Compatibility

Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11

Motor Power kW

7.5 kW

Motor Power hp

10 hp

Minimum Switching Current

3 mA at 24 V DC for configurable relay logic

Insulation Resistance

>= 1 mOhm 500 V DC for 1 minute

Certifications

C-Tick NOM 117 UL CSA

Operating Position

Vertical +/- 10 degree

Product Specific Application

Pumps and fans in HVAC

Shock Resistance

15 gn for 11 ms conforming to IEC 60068-2-27

Protection Type

Overheating protection: drive Thermal power stage: drive Short-circuit between motor phases: drive Input phase breaks: drive Overcurrent between output phases and earth: drive Overvoltages on the DC bus: drive Break on the control circuit: drive Against exceeding limit speed: drive Line supply overvoltage and undervoltage: drive Line supply undervoltage: drive Against input phase loss: drive Thermal protection: motor Motor phase break: motor With PTC probes: motor

Connector Type

1 open style 1 RJ45

Product Destination

Asynchronous motors

Output Voltage

<= power supply voltage

Analogue Input Number

Assembly Style

With heat sink

Maximum Switching Current

5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R) 5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R) 2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R) 2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)

Electrical Connection

VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14 L1/R, L2/S, L3/T: terminal 16 mm² / AWG 6

Network Number of Phases

3 phases

Discrete Input Logic

Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1) Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1)

Discrete Output Number

Regulation Loop

Adjustable PI regulator

Supply

Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 A, protection type: overload and short-circuit protection Internal supply: 24 V DC (21…27 V), <200 A, protection type: overload and short-circuit protection

Physical Interface

2-wire RS 485

Analogue Output Number

Analogue Output Type

FM switch-configurable voltage 0...10 V DC, impedance: 7620 Ohm, resolution 10 bits FM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits

EMC Filter

Class C2 EMC filter integrated

Communication Port Protocol

APOGEE FLN LonWorks BACnet METASYS N2 Modbus

Asynchronous Motor Control Profile

Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Flux vector control without sensor, standard Voltage/frequency ratio, 5 points Voltage/frequency ratio, 2 points

Nominal Switching Frequency

12 kHz

Prospective Line Isc

22 kA

Discrete Input Type

F programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm R programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm RES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm

Discrete Output Type

Configurable relay logic: (FLA, FLC) NO - 100000 cycles Configurable relay logic: (FLB, FLC) NC - 100000 cycles Configurable relay logic: (RY, RC) NO - 100000 cycles

Transmission Frame

RTU

Number of Addresses

1…247

Data Format

8 bits, 1 stop, odd even or no configurable parity

Type of Polarization

No impedance

Acceleration and Deceleration Ramps

Linear adjustable separately from 0.01 to 3200 s Automatic based on the load

Motor Slip Compensation

Not available in voltage/frequency ratio motor control Automatic whatever the load Adjustable

Braking to Standstill

By DC injection

Isolation

Electrical between power and control

Option Card

Communication card for LonWorks

Frequency Resolution

Display unit: 0.1 Hz Analog input: 0.024/50 Hz

Variable Speed Drive Application Selection

Building - HVAC compressor for scroll Building - HVAC fan Building - HVAC pump

Motor Power Range AC-3

7…11 kW at 380…440 V 3 phases 7…11 kW at 480…500 V 3 phases

Communication Service

Monitoring inhibitable Read holding registers (03) 2 words maximum Write multiple registers (16) 2 words maximum Write single register (06) Read device identification (43) Time out setting from 0.1 to 100 s

Transient Overtorque

120 % of nominal motor torque +/- 10 % for 60 s

Speed Accuracy

+/- 10 % of nominal slip 0.2 Tn to Tn

Supply Voltage Limits

323…528 V

Dielectric Strength

3535 V DC between earth and power terminals 5092 V DC between control and power terminals

Response Time

FM 2 ms, tolerance +/- 0.5 ms for analog output(s) FLA, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s) FLB, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s) RY, RC 7 ms, tolerance +/- 0.5 ms for discrete output(s)

Type of Cable

Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC

Motor Starter Type

Variable speed drive

Functionality

Mid

Spesific Application

HVAC

Torque Accuracy

+/- 15 %

Air Flow

100 m3/h

Tightening Torque

0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) 2.5 N.m, 22 lb.in (L1/R, L2/S, L3/T)

Product Description

Schneider Electric ATV212HU75N4 7.5kW - Variable Speed Drive ATV212

This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21 and it has a built-in EMC filter. It works at a rated power up to 7.5kW / 10hp and a rated voltage from 380V to 480V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 6.45kg and its dimensions are, 180mm wide, 232mm high, 170mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet. It is eco-friendly and complies with directives such as RoHS, WEEE, etc.relating to environmental protection.

US $ 2,283.71

Quantity: