IP20 without blanking plate on upper part
IP40 top
Ambient Air Temperature for Operation
-10…55 °C without derating
55…60 °C protective cover from the top of the drive removed with current derating 2.2 % per °C
Ambient Air Temperature for Storage
-25…70 °C
Operating Altitude
<= 1000 m without derating
[Us] Rated Supply Voltage
380...460 V - 15...10 %
Supply Frequency
50/60 Hz +/- 5 %
Switching Frequency
2...12 kHz adjustable
Noise Level
50 dB
Transmission Rate
4800 bit/s
9600 bit/s
19200 bit/s
38400 bit/s
Power Dissipation in W
75.5 W, at In (heavy duty)
Sampling Duration
10 ms for analogue input
20 ms, tolerance +/- 1 ms for logic input
Continuous Output Current
5.5 A heavy duty
Line Current
8.8 A at 380 V (heavy duty)
7.2 A at 460 V (heavy duty)
Apparent Power
5.7 kVA at 460 V (heavy duty)
Maximum Transient Current
8.3 A during 60 s (heavy duty)
Linearity Error
+/- 0.3 % of maximum value for analogue input
Width
105 mm
This spec is not available in the specification table.
Device Short Name
ATV310
This spec is not available in the specification table.
Product or Component Type
Variable speed drive
This spec is not available in the specification table.
Depth
151 mm
This spec is not available in the specification table.
Height
143 mm
This spec is not available in the specification table.
Pollution Degree
2 conforming to IEC 61800-5-1
This spec is not available in the specification table.
Relative Humidity
5…95 % without condensation conforming to IEC 60068-2-3
5…95 % without dripping water conforming to IEC 60068-2-3
This spec is not available in the specification table.
Environmental Characteristic
Dust pollution resistance class 3S2 conforming to IEC 60721-3-3
Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3
This spec is not available in the specification table.
Analog Input Type
Configurable current AI1 0...20 mA 250 Ohm
Configurable voltage AI1 0...10 V 30 kOhm
Configurable voltage AI1 0...5 V 30 kOhm
This spec is not available in the specification table.
Electromagnetic Compatibility
Electrical fast transient/burst immunity test - test level: level 4 conforming to IEC 61000-4-4
Electrostatic discharge immunity test - test level: level 3 conforming to IEC 61000-4-2
Immunity to conducted disturbances - test level: level 3 conforming to IEC 61000-4-6
Radiated radio-frequency electromagnetic field immunity test - test level: level 3 conforming to IEC 61000-4-3
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Surge immunity test - test level: level 3 conforming to IEC 61000-4-5
This spec is not available in the specification table.
Motor Power kW
2.2 kW for heavy duty
This spec is not available in the specification table.
Motor Power hp
3 hp for heavy duty
This spec is not available in the specification table.
Minimum Switching Current
5 mA at 24 V DC for logic relay
This spec is not available in the specification table.
Operating Position
Vertical +/- 10 degree
This spec is not available in the specification table.
Product Specific Application
Simple machine
This spec is not available in the specification table.
Shock Resistance
15 gn conforming to IEC 60068-2-27 for 11 ms
This spec is not available in the specification table.
Protection Type
Line supply overvoltage
Line supply undervoltage
Overcurrent between output phases and earth
Overheating protection
Short-circuit between motor phases
Against input phase loss in three-phase
Thermal motor protection via the drive by continuous calculation of I²t
This spec is not available in the specification table.
Connector Type
RJ45 (on front face) for Modbus
This spec is not available in the specification table.
Product Destination
Asynchronous motors
This spec is not available in the specification table.
Output Voltage
380...460 V three phase
This spec is not available in the specification table.
Discrete Input Number
4
This spec is not available in the specification table.
Analogue Input Number
1
This spec is not available in the specification table.
Assembly Style
With heat sink
This spec is not available in the specification table.
Maximum Switching Current
2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay
4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay
This spec is not available in the specification table.
This spec is not available in the specification table.
Network Number of Phases
3 phases
This spec is not available in the specification table.
Discrete Input Logic
Negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm
Positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)
This spec is not available in the specification table.
Discrete Output Number
2
This spec is not available in the specification table.
Supply
Internal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protection
Internal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection
This spec is not available in the specification table.
Physical Interface
2-wire RS 485 for Modbus
This spec is not available in the specification table.
Analogue Output Number
1
This spec is not available in the specification table.