NIPPON

Oldtown

SCHNEIDER ELECTRIC

Food and Beverage

food-and-beverage

Coffee

coffee

Electricals

electricals

Electrical Tapes

electrical-tapes

Hammers, Punches & Chisels

hammers-punches-chisels

Hammers & Mallets

hammers-mallets

Electrical Switches

electrical-switches

Light Switches

light-switches

Painting Materials

painting-materials

Paints

paints

3M 35 Scotch Vinyl Electrical Tape 3/4" X 66' (white)

 Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). 

UL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.

Color coding for phase identification, job identification and safety

Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather

Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.

On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.

Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.

<h3 class="md-block-header-three">3M 35 Scotch Vinyl Electrical Tape 3/4&quot; X 66&#x27; (white)</h3> Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). Agency Approvals &amp; Self CertificationsUL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.Applications<ul class="md-block-unordered-list-item"><li>Color coding for phase identification, job identification and safety</li><li>Insulating electrical wiring</li><li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li></ul>Installation<ul class="md-block-unordered-list-item"><li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li><li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li><li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Size: 3/4&quot; X 66&#x27; </li><li>Colour: White</li></ul>

<h3>3M 35 Scotch Vinyl Electrical Tape 3/4" X 66' (white)</h3>
&nbsp;Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C).&nbsp;
Agency Approvals &amp; Self Certifications
UL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.
Applications
<ul>
<li>Color coding for phase identification, job identification and safety</li>
<li>Insulating electrical wiring</li>
<li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li>
</ul>
Installation
<ul>
<li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li>
<li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li>
<li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li>
</ul>
Specifications
<ul>
<li>Size: 3/4" X 66'&nbsp;</li>
<li>Colour: White</li>
</ul>

Ms. Lim

3m 35 scotch vinyl electrical tape 3/4" 66' (white) pita listrik (putih) tapes elektrik 乙烯基电工胶带 3/4 英寸 66 英尺（白色）

3m-35-scotch-vinyl-electrical-tape-3-4-x-66-white

3M 35 Scotch Vinyl Electrical Tape (10Rolls)3/4" X 66' (white)

<h3 class="md-block-header-three">3M 35 Scotch Vinyl Electrical Tape (10Rolls)3/4&quot; X 66&#x27; (white)</h3> Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). Agency Approvals &amp; Self CertificationsUL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.Applications<ul class="md-block-unordered-list-item"><li>Color coding for phase identification, job identification and safety</li><li>Insulating electrical wiring</li><li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li></ul>Installation<ul class="md-block-unordered-list-item"><li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li><li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li><li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Size: 3/4&quot; X 66&#x27; </li><li>Colour: White</li><li>Pack of 10 rolls</li></ul>

<h3>3M 35 Scotch Vinyl Electrical Tape (10Rolls)3/4" X 66' (white)</h3>
&nbsp;Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C).&nbsp;
Agency Approvals &amp; Self Certifications
UL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.
Applications
<ul>
<li>Color coding for phase identification, job identification and safety</li>
<li>Insulating electrical wiring</li>
<li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li>
</ul>
Installation
<ul>
<li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li>
<li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li>
<li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li>
</ul>
Specifications
<ul>
<li>Size: 3/4" X 66'&nbsp;</li>
<li>Colour: White</li>
<li>Pack of 10 rolls</li>
</ul>

3m 35 scotch vinyl electrical tape (10rolls)3/4" 66' (white) pita listrik vinil (10 gulungan) 3/4" (putih) tapes elektrik 乙烯基电工胶带（10 卷）3/4 英寸 66 英尺（白色）

3m-35-scotch-vinyl-electrical-tape-10rolls-3-4-x-66-white

Allen-Bradley

Kennedy

Panduit

FLUKE

Exoweld

Festo

Weidmuller

Sherwood

Monitoring Relays

Drill Bits & Drill Bit Sets

Power Supply

Circuit Breaker

Contactors

Cable Protectors

Power Relay

Electrical Power Testing

KVC ETH

buyerIntroduction

3M 80610833982 35 Scotch Vinyl Electrical Tape 19MM X 20M White

3m 80610833982 35 scotch vinyl electrical tape 19mm 20m white pita listrik putih tapes elektrik 苏格兰乙烯基电工胶带 白色

3m-80610833982-35-scotch-vinyl-electrical-tape-19mm-x-20m-white

 M10 011-231-35 NF-35 (white) Nylon Hammer

Hickory wood handle with replaceable nylon tips.

<h3 class="md-block-header-three"> M10 011-231-35 NF-35 (white) Nylon Hammer</h3>Hickory wood handle with replaceable nylon tips.

<h3> M10 011-231-35 NF-35 (white) Nylon Hammer</h3>
Hickory wood handle with replaceable nylon tips.

Stefy

M10 011-231-35 NF-35 (white) Nylon Hammer

m10 011-231-35 nf-35 (white) nylon hammer (putih) palu nilon hammers mallets tukul besi getah nf-35（白色）尼龙锤 锤子和槌

m10-011-231-35-nf-35-white-nylon-hammer

Oldtown White Coffee 3in1 Salted Caramel 15s X 35g

The OLDTOWN White Coffee Salted Caramel Flavoured balances the delicious sweetness of buttery caramel with savoury saltiness.​​

​​Salted Caramel is delicious, indulgent and an all-time favourite combination.​

<h3 class="md-block-header-three">Oldtown White Coffee 3in1 Salted Caramel 15s X 35g</h3>The OLDTOWN White Coffee Salted Caramel Flavoured balances the delicious sweetness of buttery caramel with savoury saltiness.​​​​Salted Caramel is delicious, indulgent and an all-time favourite combination.​<ul class="md-block-unordered-list-item"><li>15 sachets x 35 g</li></ul>

<h3>Oldtown White Coffee 3in1 Salted Caramel 15s X 35g</h3>
The OLDTOWN White Coffee Salted Caramel Flavoured balances the delicious sweetness of buttery caramel with savoury saltiness.​​
​​Salted Caramel is delicious, indulgent and an all-time favourite combination.​
<ul>
<li>15 sachets x 35 g</li>
</ul>

oldtown white coffee 3in1 salted caramel 15s 35g kopi putih karamel asin oldtown/老镇 白咖啡 咸焦糖 老镇

oldtown-white-coffee-3in1-salted-caramel-15s-x-35g

Schneider Electric E35_1_2AR_WE_G11 S-Classic - 1-way Switch - 5 Gangs - White 

Ambient Air Temperature for Operation: -5…40 °C

<h3 class="md-block-header-three">Schneider Electric E35_1_2AR_WE_G11 S-Classic - 1-way Switch - 5 Gangs - White </h3><ul class="md-block-unordered-list-item"><li>Range: S-Classic</li><li>Product or Component Type: Switch</li><li>Switch Application: Lighting</li><li>Quantity per Set: Set of 1</li></ul><h3 class="md-block-header-three">Complementary Information</h3><ul class="md-block-unordered-list-item"><li>Control Type: Rocker</li><li>Actuator: Rocker</li><li>Switch Function: 1-way</li><li>Number of Gangs: 5 gangs</li><li>Device Mounting: Flush</li><li>Rated Current: 10 AX at 250 V AC</li><li>Number of Terminals: 2</li></ul><h3 class="md-block-header-three">Material</h3><ul class="md-block-unordered-list-item"><li>Dolly: PC (polycarbonate), white</li><li>Contact: Brass</li><li>Terminals: Silver alloy</li></ul><h3 class="md-block-header-three">Dimensions</h3><ul class="md-block-unordered-list-item"><li>Embedding Depth: 12.3 mm</li><li>Height: 87 mm</li><li>Width: 87 mm</li><li>Depth: 28.9 mm</li></ul><h3 class="md-block-header-three">Environmental Specifications</h3><ul class="md-block-unordered-list-item"><li>Ambient Air Temperature for Operation: -5…40 °C</li><li>Relative Humidity: 0…95 %</li></ul><h3 class="md-block-header-three">Standards</h3><ul class="md-block-unordered-list-item"><li>IEC 60669-1</li><li>MS IEC 60669-1</li><li>SS 227</li></ul>

<h3>Schneider Electric E35_1_2AR_WE_G11 S-Classic - 1-way Switch - 5 Gangs - White&nbsp;</h3>
<ul>
<li>Range: S-Classic</li>
<li>Product or Component Type: Switch</li>
<li>Switch Application: Lighting</li>
<li>Quantity per Set: Set of 1</li>
</ul>
<h3>Complementary Information</h3>
<ul>
<li>Control Type: Rocker</li>
<li>Actuator: Rocker</li>
<li>Switch Function: 1-way</li>
<li>Number of Gangs: 5 gangs</li>
<li>Device Mounting: Flush</li>
<li>Rated Current: 10 AX at 250 V AC</li>
<li>Number of Terminals: 2</li>
</ul>
<h3>Material</h3>
<ul>
<li>Dolly: PC (polycarbonate), white</li>
<li>Contact: Brass</li>
<li>Terminals: Silver alloy</li>
</ul>
<h3>Dimensions</h3>
<ul>
<li>Embedding Depth: 12.3 mm</li>
<li>Height: 87 mm</li>
<li>Width: 87 mm</li>
<li>Depth: 28.9 mm</li>
</ul>
<h3>Environmental Specifications</h3>
<ul>
<li>Ambient Air Temperature for Operation: -5…40 °C</li>
<li>Relative Humidity: 0…95 %</li>
</ul>
<h3>Standards</h3>
<ul>
<li>IEC 60669-1</li>
<li>MS IEC 60669-1</li>
<li>SS 227</li>
</ul>

Pilot Lights

Schneider Electric E35_1_2AR_WE_G11 S-Classic - 1-way Switch - 5 Gangs - White

schneider electric e35_1_2ar_we_g11 s-classic 1-way switch gangs white sakelar arah geng putih light switches s-klasik suis hala electric/施耐德电气 单控开关 白色 施耐德电气

schneider-electric-e35-1-2ar-we-g11-s-classic-1-way-switch-5-gangs-white

Oldtown White Coffee 3in1 Extra Rich 15s X 35g

 Old Town White Coffee Extra Rich is a delicious and aromatic coffee that is made with 100% Arabica beans. It is a rich, smooth coffee with a subtle sweetness that is perfect for any time of day. The coffee is made using a traditional Malaysian brewing method, which results in a rich and flavorful cup of coffee. 

<h3 class="md-block-header-three">Oldtown White Coffee 3in1 Extra Rich 15s X 35g</h3> Old Town White Coffee Extra Rich is a delicious and aromatic coffee that is made with 100% Arabica beans. It is a rich, smooth coffee with a subtle sweetness that is perfect for any time of day. The coffee is made using a traditional Malaysian brewing method, which results in a rich and flavorful cup of coffee.

<h3>Oldtown White Coffee 3in1 Extra Rich 15s X 35g</h3>
&nbsp;Old Town White Coffee Extra Rich is a delicious and aromatic coffee that is made with 100% Arabica beans. It is a rich, smooth coffee with a subtle sweetness that is perfect for any time of day. The coffee is made using a traditional Malaysian brewing method, which results in a rich and flavorful cup of coffee.&nbsp;

oldtown white coffee 3in1 extra rich 15s 35g kopi putih ekstra kaya oldtown/老镇 三合一特浓白咖啡 15 35 老镇

oldtown-white-coffee-3in1-extra-rich-15s-x-35g

Nippon Weathergold Exterior Wall - White - 5 Liter

 Matex WeatherGold is a pure acrylic-based paint with non-added mercury which is specially formulated for exterior walls. This mid quality paint resists fungus, flaking and chalking. It provides good adhesion onto walls, has low dirt retention properties, and is durable against exterior weather. 

Product Features: • Affordable price • Reasonable durability against harsh weather • Good Chalking and flaking resistance. • Non-toxic, does not contain lead, mercury and heavy metals • Fungus and algae resistance Paint Type Product Type Finishing Recommended Substrate Pack Size Water based Exterior Low Sheen Masonry, brick, plastering substrate and fibre board 1 Litre, 5 Litres, 15 Litres Composition Pigment : Titanium Dioxide, Iron Oxide, Carbon Black and Organic Pigments Binder : Pure Acrylic Emulsion Thinner : Water Technical Data Drying Time : Touch Dry : Hard Dry : 20 - 30 minutes (Dependent on temperature and humidity) : 45 - 60 minutes (Dependent on temperature and humidity) Recoating Time : 2 hours (Dependent on temperature and humidity) Dry Film Thickness : Around 30 µm per coat (based on substrate condition) No. of Coats : 2 coats Theoretical Coverage Volume Solid Shelf Life : 9 - 11 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance) : ~ 35% : Up to 36 months in tight sealed container Application Method Brush / Roller : Dilute the paint with not more than 5% of water. Preferable not dilute for best performance. Recommended Coating System Sealer/Primer Top Coat : Vinilex 5100 Wall Sealer / Advance 8000 Wall Sealer / Expresskote Sealer / Acrylic 5170 Wall Sealer / Hi-Bond Wall Sealer (on powdery or skim-coated surface) : Matex WeatherGold : 1 Coat : 2 Coats 

Surface Preparation Remove all loose, defective paint or powdery residues. Repair cracks, uneven surfaces with suitable fillers. Smoothen the putty / filler areas with sandpaper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.) 
 

Nippon Weathergold Exterior Wall - White - 5 Liter Matex WeatherGold is a pure acrylic-based paint with non-added mercury which is specially formulated for exterior walls. This mid quality paint resists fungus, flaking and chalking. It provides good adhesion onto walls, has low dirt retention properties, and is durable against exterior weather. Product Features: • Affordable price • Reasonable durability against harsh weather • Good Chalking and flaking resistance. • Non-toxic, does not contain lead, mercury and heavy metals • Fungus and algae resistance Paint Type Product Type Finishing Recommended Substrate Pack Size Water based Exterior Low Sheen Masonry, brick, plastering substrate and fibre board 1 Litre, 5 Litres, 15 Litres Composition Pigment : Titanium Dioxide, Iron Oxide, Carbon Black and Organic Pigments Binder : Pure Acrylic Emulsion Thinner : Water Technical Data Drying Time : Touch Dry : Hard Dry : 20 - 30 minutes (Dependent on temperature and humidity) : 45 - 60 minutes (Dependent on temperature and humidity) Recoating Time : 2 hours (Dependent on temperature and humidity) Dry Film Thickness : Around 30 µm per coat (based on substrate condition) No. of Coats : 2 coats Theoretical Coverage Volume Solid Shelf Life : 9 - 11 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance) : ~ 35% : Up to 36 months in tight sealed container Application Method Brush / Roller : Dilute the paint with not more than 5% of water. Preferable not dilute for best performance. Recommended Coating System Sealer/Primer Top Coat : Vinilex 5100 Wall Sealer / Advance 8000 Wall Sealer / Expresskote Sealer / Acrylic 5170 Wall Sealer / Hi-Bond Wall Sealer (on powdery or skim-coated surface) : Matex WeatherGold : 1 Coat : 2 Coats Surface Preparation Remove all loose, defective paint or powdery residues. Repair cracks, uneven surfaces with suitable fillers. Smoothen the putty / filler areas with sandpaper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.)

Nippon Weathergold Exterior Wall - White - 5 Liter
&nbsp;Matex WeatherGold is a pure acrylic-based paint with non-added mercury which is specially formulated for exterior walls. This mid quality paint resists fungus, flaking and chalking. It provides good adhesion onto walls, has low dirt retention properties, and is durable against exterior weather.&nbsp;
Product Features: • Affordable price • Reasonable durability against harsh weather • Good Chalking and flaking resistance. • Non-toxic, does not contain lead, mercury and heavy metals • Fungus and algae resistance Paint Type Product Type Finishing Recommended Substrate Pack Size Water based Exterior Low Sheen Masonry, brick, plastering substrate and fibre board 1 Litre, 5 Litres, 15 Litres Composition Pigment : Titanium Dioxide, Iron Oxide, Carbon Black and Organic Pigments Binder : Pure Acrylic Emulsion Thinner : Water Technical Data Drying Time : Touch Dry : Hard Dry : 20 - 30 minutes (Dependent on temperature and humidity) : 45 - 60 minutes (Dependent on temperature and humidity) Recoating Time : 2 hours (Dependent on temperature and humidity) Dry Film Thickness : Around 30 µm per coat (based on substrate condition) No. of Coats : 2 coats Theoretical Coverage Volume Solid Shelf Life : 9 - 11 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance) : ~ 35% : Up to 36 months in tight sealed container Application Method Brush / Roller : Dilute the paint with not more than 5% of water. Preferable not dilute for best performance. Recommended Coating System Sealer/Primer Top Coat : Vinilex 5100 Wall Sealer / Advance 8000 Wall Sealer / Expresskote Sealer / Acrylic 5170 Wall Sealer / Hi-Bond Wall Sealer (on powdery or skim-coated surface) : Matex WeatherGold : 1 Coat : 2 Coats&nbsp;
Surface Preparation Remove all loose, defective paint or powdery residues. Repair cracks, uneven surfaces with suitable fillers. Smoothen the putty / filler areas with sandpaper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.) 
&nbsp;