Spanjaard

Machinery Lubricants

machinery-lubricants

Lubricants

lubricants

Spanjaard Open Gear Lubricant OGL 1280 NLGI 1.5 SPANJ-OPEN GEAR11280-15KG 

A dark grey / black, tacky, heavy duty, bentone-based lubricant containing oxidation, anti-corrosion, MoS2and other extreme pressure additives. No heat or solvent required for application.
15kg keg 

•    A lower-cost open gear lubricant for all medium to fast moving open or exposed gears as found on cranes, excavating plant and winches.

•    Suitable for adverse weather conditions or in contaminated environments e.g. cement works, paper mills, steel mills, drilling rig jacking legs at sea, etc.

<h3 class="md-block-header-three">Spanjaard Open Gear Lubricant OGL 1280 NLGI 1.5 SPANJ-OPEN GEAR11280-15KG </h3>A dark grey / black, tacky, heavy duty, bentone-based lubricant containing oxidation, anti-corrosion, MoS2and other extreme pressure additives. No heat or solvent required for application. 15kg keg •    A lower-cost open gear lubricant for all medium to fast moving open or exposed gears as found on cranes, excavating plant and winches.•    Suitable for adverse weather conditions or in contaminated environments e.g. cement works, paper mills, steel mills, drilling rig jacking legs at sea, etc.

<h3>Spanjaard Open Gear Lubricant OGL 1280 NLGI 1.5 SPANJ-OPEN GEAR11280-15KG&nbsp;</h3>
A dark grey / black, tacky, heavy duty, bentone-based lubricant containing oxidation, anti-corrosion, MoS2and other extreme pressure additives. No heat or solvent required for application. 
15kg keg&nbsp;
•    A lower-cost open gear lubricant for all medium to fast moving open or exposed gears as found on cranes, excavating plant and winches.
•    Suitable for adverse weather conditions or in contaminated environments e.g. cement works, paper mills, steel mills, drilling rig jacking legs at sea, etc.

Siti Yuliana Misono

buyerIntroduction

Spanjaard Open Gear Lubricant 1280 Nlgi 1.5 SPANJ-OPEN GEAR11280-15KG

spanjaard open gear lubricant 1280 nlgi 1.5 spanj-open gear11280-15kg lubricants pelumas pelincir terbuka spanjaard/西班牙人 开式齿轮润滑油 润滑剂 西班牙人

spanjaard-open-gear-lubricant-1280-nlgi-1-5-spanj-open-gear11280-15kg

Spanjaard ANTI-SCUFF Spray SPANJ-ANTI SCUFF-350ML SPR

A gelled, soft paste assembly compound in aerosol form with a high Molybdenum Disulphide (MoS2) content used for engine or parts assembly to ensure bedding in without scuffing, pick-up or scoring. Also used as an anti-seize for pipe threads and for pre-treatment of large open gears. Anti-Scuff Paste can be used if a paste is preferred.

Spanjaard Anti-Scuff Spray is used for the assembly of moving parts. It reduces wear by providing lubrication during running-in. Also used for the pre-treatment of new or reconditioned plain bearings, gears, piston rings, cams, lathe centres and slides and their controls.


Prevents seizure in nuts and bolts, valves and cocks, screw threads (drill pipe tool joint lubricant, threads in refrigeration systems), press fittings and turbine studs.


A lubricant for phosphor bronze bearings - particularly in generating equipment, bulk head mechanisms, cylinder plungers and turbine relay valves. Used on loaded equipment linkages subject to high impact stresses or twisting.


Assembling machines with Spanjaard Anti-Scuff Spray results in the elimination of scuffing, pick-up or scoring during the bedding-in period, after which time the machine will run for its full designed life with minimum wear.


Even when the oil components begin to oxidise at above 200°C the MoS2 provides solid film lubrication up to 450°C.


The load carrying capacity of MoS2 is in excess of 2 750 Mpa (400 000 psi), above the yield point of most metals, and cold forming of the metal under the MoS2 film can take place without “welding” or pick-up occurring. Thus, when a hydro-dynamic oil film wedge is not present, wear or damage is prevented.

<h3 class="md-block-header-three">Spanjaard ANTI-SCUFF Spray SPANJ-ANTI SCUFF-350ML SPR</h3> DescriptionA gelled, soft paste assembly compound in aerosol form with a high Molybdenum Disulphide (MoS2) content used for engine or parts assembly to ensure bedding in without scuffing, pick-up or scoring. Also used as an anti-seize for pipe threads and for pre-treatment of large open gears. Anti-Scuff Paste can be used if a paste is preferred.ApplicationsSpanjaard Anti-Scuff Spray is used for the assembly of moving parts. It reduces wear by providing lubrication during running-in. Also used for the pre-treatment of new or reconditioned plain bearings, gears, piston rings, cams, lathe centres and slides and their controls. Prevents seizure in nuts and bolts, valves and cocks, screw threads (drill pipe tool joint lubricant, threads in refrigeration systems), press fittings and turbine studs. A lubricant for phosphor bronze bearings - particularly in generating equipment, bulk head mechanisms, cylinder plungers and turbine relay valves. Used on loaded equipment linkages subject to high impact stresses or twisting. Assembling machines with Spanjaard Anti-Scuff Spray results in the elimination of scuffing, pick-up or scoring during the bedding-in period, after which time the machine will run for its full designed life with minimum wear. Even when the oil components begin to oxidise at above 200°C the MoS2 provides solid film lubrication up to 450°C. The load carrying capacity of MoS2 is in excess of 2 750 Mpa (400 000 psi), above the yield point of most metals, and cold forming of the metal under the MoS2 film can take place without “welding” or pick-up occurring. Thus, when a hydro-dynamic oil film wedge is not present, wear or damage is prevented.

<h3>Spanjaard ANTI-SCUFF Spray SPANJ-ANTI SCUFF-350ML SPR</h3>
 
<ins>Description</ins>
A gelled, soft paste assembly compound in aerosol form with a high Molybdenum Disulphide (MoS2) content used for engine or parts assembly to ensure bedding in without scuffing, pick-up or scoring. Also used as an anti-seize for pipe threads and for pre-treatment of large open gears. Anti-Scuff Paste can be used if a paste is preferred.
<ins>Applications</ins>
Spanjaard Anti-Scuff Spray is used for the assembly of moving parts. It reduces wear by providing lubrication during running-in. Also used for the pre-treatment of new or reconditioned plain bearings, gears, piston rings, cams, lathe centres and slides and their controls. 

Prevents seizure in nuts and bolts, valves and cocks, screw threads (drill pipe tool joint lubricant, threads in refrigeration systems), press fittings and turbine studs. 

A lubricant for phosphor bronze bearings - particularly in generating equipment, bulk head mechanisms, cylinder plungers and turbine relay valves. Used on loaded equipment linkages subject to high impact stresses or twisting. 

Assembling machines with Spanjaard Anti-Scuff Spray results in the elimination of scuffing, pick-up or scoring during the bedding-in period, after which time the machine will run for its full designed life with minimum wear. 

Even when the oil components begin to oxidise at above 200°C the MoS2 provides solid film lubrication up to 450°C. 

The load carrying capacity of MoS2 is in excess of 2 750 Mpa (400 000 psi), above the yield point of most metals, and cold forming of the metal under the MoS2 film can take place without “welding” or pick-up occurring. Thus, when a hydro-dynamic oil film wedge is not present, wear or damage is prevented.

SLOT GREASE

Anti Rust Coating & Lubricant

Grease

Coatings

Degreasers

Sealants

Cutting Fluid

Multi Purpose Cleaners

spanjaard anti-scuff spray spanj-anti scuff-350ml spr lubricants pelumas pelincir spanjaard/西班牙人 喷雾 润滑剂 西班牙人

spanjaard-anti-scuff-spray-spanj-anti-scuff-350ml-spr

Spanjaard Mould Protector - Green SPANJ-MOULDP GREEN-400ML SPR

 Spanjaard mould protector oil also known as Anti Rust Wax (blue, green, brown) is a light coloured, waxy, corrosion protector for moulds, dies and machine tools. The protective film does not need to be removed before re-use. Available in an easy to apply, ozone friendly, aerosol. (A 'blue coloured' aerosol and bulk version is also available).

Applications
Spanjaard Mould Protector was developed for corrosion protection of steel injection and extrusion moulds in storage between use (e.g. plastic industry). Displaces and repels water. Protects metal surfaces from rust and acid/alkali attack. The thin, light coloured, film allows subsequent use of the mould without the necessity of removing the protective film.

Spanjaard Mould Protector will protect all steel and other metal surfaces against corrosion e.g. tools, machinery, parts, weapons, interior voids of cars, etc.


Shake aerosol can and spray evenly 20cm from surface. Allow to dry for 30 seconds and apply second coat (coating can be removed with white spirits or aromatic solvent)

<h3 class="md-block-header-three">Spanjaard Mould Protector - Green SPANJ-MOULDP GREEN-400ML SPR</h3> Spanjaard mould protector oil also known as Anti Rust Wax (blue, green, brown) is a light coloured, waxy, corrosion protector for moulds, dies and machine tools. The protective film does not need to be removed before re-use. Available in an easy to apply, ozone friendly, aerosol. (A &#x27;blue coloured&#x27; aerosol and bulk version is also available).Applications Spanjaard Mould Protector was developed for corrosion protection of steel injection and extrusion moulds in storage between use (e.g. plastic industry). Displaces and repels water. Protects metal surfaces from rust and acid/alkali attack. The thin, light coloured, film allows subsequent use of the mould without the necessity of removing the protective film.Spanjaard Mould Protector will protect all steel and other metal surfaces against corrosion e.g. tools, machinery, parts, weapons, interior voids of cars, etc. Application InstructionShake aerosol can and spray evenly 20cm from surface. Allow to dry for 30 seconds and apply second coat (coating can be removed with white spirits or aromatic solvent)

<h3>Spanjaard Mould Protector - Green SPANJ-MOULDP GREEN-400ML SPR</h3>
&nbsp;Spanjaard mould protector oil also known as Anti Rust Wax (blue, green, brown) is a light coloured, waxy, corrosion protector for moulds, dies and machine tools. The protective film does not need to be removed before re-use. Available in an easy to apply, ozone friendly, aerosol. (A 'blue coloured' aerosol and bulk version is also available).
Applications 
Spanjaard Mould Protector was developed for corrosion protection of steel injection and extrusion moulds in storage between use (e.g. plastic industry). Displaces and repels water. Protects metal surfaces from rust and acid/alkali attack. The thin, light coloured, film allows subsequent use of the mould without the necessity of removing the protective film.
Spanjaard Mould Protector will protect all steel and other metal surfaces against corrosion e.g. tools, machinery, parts, weapons, interior voids of cars, etc. 

Application Instruction
Shake aerosol can and spray evenly 20cm from surface. Allow to dry for 30 seconds and apply second coat (coating can be removed with white spirits or aromatic solvent)

spanjaard mould protector green spanj-mouldp green-400ml spr hijau lubricants pelumas pelindung acuan hijau-400ml pelincir spanjaard/西班牙人 模具保护剂 绿色 润滑剂 西班牙人

spanjaard-mould-protector-green-spanj-mouldp-green-400ml-spr

Spanjaard Silicone Spray SPANJ-SILICONE-400ML SPR

SPANJAARD SILICONE SPRAY is registered with the NSF as a Category H1 lubricant for use in the food processing industry where incidental food contact may occur.. NSF Registration number is 139905.  Silicone spray is an effective lubricant and can be applied on almost all kind of surface. It include metal, glass, rubber, fabric and plastic. When sprayed on hard surfaces, silicone spray is able to maintain its lubricating properties in a variety of temperature ranges and environments. Silicone will not oxidize and it can be usable up to 200 Degree Celcius and with excellent low temperature behaviour. It has very good stability to chemical substances and not soluble in water.  

All plant for moulding of plastics, whether by compression or injection, should use Spanjaard Silicone Spray. It is also effective on embossing rollers. Not only does Spanjaard Silicone Spray ensure positive release from moulds, it also imparts a better finish to products. In moulding or synthetic rubbers, Spanjaard Silicone Spray is a powerful release agent.

In the print shop the uses of Spanjaard Silicone Spray are numerous. Every day new uses will be found. The most common applications are to prevent set off, to eliminate static adhesion, to avoid smudging. Periodic spraying of guillotine blades will increase their cutting life. Since Spanjaard Silicone Spray is used as a Release Agent in moulding, it has a definite place in the processing of stereos in metal and rubber.

To keep conveyors and chutes free from greases and stickiness and to reduce friction, spray with Spanjaard Silicone Spray. Spanjaard Silicone Spray meets incidental food contact regulations and imparts no smell or taint. Spanjaard Silicone Sprayed in ovens and on utensils cleans more easily too.

The Silicone content of Spanjaard Silicone Spray makes the most effective releasing spray on shuttering. Also treat glass and face-brick surfaces with it to prevent the adhesion of paint and plaster.

In core making, shell moulding and in the hot box and carbon dioxide processes, Spanjaard Silicone Spray will facilitate the operations. In foundry work too it will save time and tempers.

Welding - if surfaces are sprayed around the spot to be welded, weld spatter can easily be removed.

1) Water Resistant
It is resistant to water so it can be used to protect items from moisture. It is non oily but form a good lubrication layer to offer waterproof properties. Marine industry always use silicon spray as a rusty prevention spray. If sprayed on material, silicone spray will soak into the material and help water bead up and roll off the material.
 
2) Rubber Treatment
Silicone is a rubbery substance with superior sealing and lubricating properties. Due to the moisturizing property of silicone spray, it can help prevent rubber from cracking. If applied to rubber gaskets or other rubber items that may become dried, the rubber will be sealed. A sealed rubber gasket won't leak moisture and become dried out.

<h3 class="md-block-header-three">Spanjaard Silicone Spray SPANJ-SILICONE-400ML SPR</h3>SPANJAARD SILICONE SPRAY is registered with the NSF as a Category H1 lubricant for use in the food processing industry where incidental food contact may occur.. NSF Registration number is 139905. Silicone spray is an effective lubricant and can be applied on almost all kind of surface. It include metal, glass, rubber, fabric and plastic. When sprayed on hard surfaces, silicone spray is able to maintain its lubricating properties in a variety of temperature ranges and environments. Silicone will not oxidize and it can be usable up to 200 Degree Celcius and with excellent low temperature behaviour. It has very good stability to chemical substances and not soluble in water.  Application1) Plastic and Rubber MouldingAll plant for moulding of plastics, whether by compression or injection, should use Spanjaard Silicone Spray. It is also effective on embossing rollers. Not only does Spanjaard Silicone Spray ensure positive release from moulds, it also imparts a better finish to products. In moulding or synthetic rubbers, Spanjaard Silicone Spray is a powerful release agent.2) Printing and StereotypingIn the print shop the uses of Spanjaard Silicone Spray are numerous. Every day new uses will be found. The most common applications are to prevent set off, to eliminate static adhesion, to avoid smudging. Periodic spraying of guillotine blades will increase their cutting life. Since Spanjaard Silicone Spray is used as a Release Agent in moulding, it has a definite place in the processing of stereos in metal and rubber.3) Handling of Foodstuffs and CookingTo keep conveyors and chutes free from greases and stickiness and to reduce friction, spray with Spanjaard Silicone Spray. Spanjaard Silicone Spray meets incidental food contact regulations and imparts no smell or taint. Spanjaard Silicone Sprayed in ovens and on utensils cleans more easily too.4) Building IndustryThe Silicone content of Spanjaard Silicone Spray makes the most effective releasing spray on shuttering. Also treat glass and face-brick surfaces with it to prevent the adhesion of paint and plaster.5) Welding and Metal CastingIn core making, shell moulding and in the hot box and carbon dioxide processes, Spanjaard Silicone Spray will facilitate the operations. In foundry work too it will save time and tempers.Welding - if surfaces are sprayed around the spot to be welded, weld spatter can easily be removed.Benefits 1) Water Resistant It is resistant to water so it can be used to protect items from moisture. It is non oily but form a good lubrication layer to offer waterproof properties. Marine industry always use silicon spray as a rusty prevention spray. If sprayed on material, silicone spray will soak into the material and help water bead up and roll off the material. 2) Rubber Treatment Silicone is a rubbery substance with superior sealing and lubricating properties. Due to the moisturizing property of silicone spray, it can help prevent rubber from cracking. If applied to rubber gaskets or other rubber items that may become dried, the rubber will be sealed. A sealed rubber gasket won&#x27;t leak moisture and become dried out.

<h3>Spanjaard Silicone Spray SPANJ-SILICONE-400ML SPR</h3>
SPANJAARD SILICONE SPRAY is registered with the NSF as a Category H1 lubricant for use in the food processing industry where incidental food contact may occur.. NSF Registration number is 139905. Silicone spray is an effective lubricant and can be applied on almost all kind of surface. It include metal, glass, rubber, fabric and plastic. When sprayed on hard surfaces, silicone spray is able to maintain its lubricating properties in a variety of temperature ranges and environments. Silicone will not oxidize and it can be usable up to 200 Degree Celcius and with excellent low temperature behaviour. It has very good stability to chemical substances and not soluble in water. &nbsp;
Application
1) Plastic and Rubber Moulding
All plant for moulding of plastics, whether by compression or injection, should use Spanjaard Silicone Spray. It is also effective on embossing rollers. Not only does Spanjaard Silicone Spray ensure positive release from moulds, it also imparts a better finish to products. In moulding or synthetic rubbers, Spanjaard Silicone Spray is a powerful release agent.
2) Printing and Stereotyping
In the print shop the uses of Spanjaard Silicone Spray are numerous. Every day new uses will be found. The most common applications are to prevent set off, to eliminate static adhesion, to avoid smudging. Periodic spraying of guillotine blades will increase their cutting life. Since Spanjaard Silicone Spray is used as a Release Agent in moulding, it has a definite place in the processing of stereos in metal and rubber.
3) Handling of Foodstuffs and Cooking
To keep conveyors and chutes free from greases and stickiness and to reduce friction, spray with Spanjaard Silicone Spray. Spanjaard Silicone Spray meets incidental food contact regulations and imparts no smell or taint. Spanjaard Silicone Sprayed in ovens and on utensils cleans more easily too.
4) Building Industry
The Silicone content of Spanjaard Silicone Spray makes the most effective releasing spray on shuttering. Also treat glass and face-brick surfaces with it to prevent the adhesion of paint and plaster.
5) Welding and Metal Casting
In core making, shell moulding and in the hot box and carbon dioxide processes, Spanjaard Silicone Spray will facilitate the operations. In foundry work too it will save time and tempers.
Welding - if surfaces are sprayed around the spot to be welded, weld spatter can easily be removed.
Benefits 
<ins>1) Water Resistant</ins> 
It is resistant to water so it can be used to protect items from moisture. It is non oily but form a good lubrication layer to offer waterproof properties. Marine industry always use silicon spray as a rusty prevention spray. If sprayed on material, silicone spray will soak into the material and help water bead up and roll off the material. 
 
<ins>2) Rubber Treatment</ins> 
Silicone is a rubbery substance with superior sealing and lubricating properties. Due to the moisturizing property of silicone spray, it can help prevent rubber from cracking. If applied to rubber gaskets or other rubber items that may become dried, the rubber will be sealed. A sealed rubber gasket won't leak moisture and become dried out.