Nippon EA4 Finish is a two-pack amine-adduct cured epoxy finish for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required.
- Excellent adhesion
- Good resistance to mechanical damage and abrasion
- Application: Brush, Roller, Airless Spray, Compressed Air Spray
- Thinning: Thin up to 10% by volume of SA-65 Thinner
- Touch Dry: 2 - 3 hours
- Hard Dry: 16 hours
- Recoating Interval: Minimum 16 hours
- No. of Coats: 1 - 3 coats
- Theoretical Coverage: 6.4 - 10.2 m² per liter per coat
- Size: 4 L (Base) + 1 L (Hardener)