Pilz 541114 RFiD safety switch
RFiD safety switch, 2 safe SC outputs, male connector M12/8- pin on 1.5 m cable, for applications up to SIL 3 or PL e or Cat. 4, IP67, typ. operating distance 11 mm, Sao = 8 mm, Sar = 20 mm, PU = 1piece fully coded switch with actuator, max. 8 teach-in processes.
Specifications:
Approval: CE, UKCA, cULus Listed, FCC, IC, TÜV, EAC (Eurasian)
Sensor principle: Transponder
Coding level to ISO 14119: High
Classification to EN 60947-5-3: PDDB
Transponder coding: Fully coded
Suitable for series connection: Yes
Unit type: Unit
Supply voltage: 24 V DC
Power consumption: 1 W
Number of inputs: 2
Input voltage: 24 V DC
Number of OSSD outputs: 2
Number of signal outputs: 1
Potential isolation S/C O: No
Short-circuit-proof output: Yes
Utilisation category (EN 60947-1): DC-12
Ambient temperature standard: EN 60068-2-14
Ambient temperature: –25 to +70 °C
Max. ambient temperature at Hmax: +60 °C
Max. ambient temperature at 2000 m: +70 °C
Storage temperature standard: EN 60068-2-1/-2
Climatic suitability: EN 60068-2-78
Humidity rating: 93% r.h. at 40 °C
Permissible operating height: 4000 m
EMC standard: EN 60947-5-3
Vibration standard: EN 60947-5-2
Shock resistance: 30 g
Overvoltage category: III
Pollution degree: 3
Protection type: IP6K9K
Change in operating distance due to temperature: ±0.01 mm/°C
Bend radius (installation): 5 × Ø
Type 1 actuator: PSEN cs4.1
Flush-mountable sensor: Yes (follow installation guide)
Connection type: M12, 8-pin male
Cable lines: Li9Y11Y 8 × 0.14 mm²
Housing material (upper part): PBT
Height: 37 mm
Width: 26 mm
Depth: 18 mm
Net weight: 110 g
Gross weight: 140 g
Operating frequency: 122–128 kHz
