Proto 1/4" Drive Torque Wrench Tester 5-50in/lb ft/lb Nm Nist Cert Digital Steel Red 6470

• Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required.
• Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions.
• Broad accuracy range extends from 10% to 100% of full scale.
• Three units of measure are available ft-lb, in-lb, and Nm.
• Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches).
• Fast sampling rate helps maintain high accuracy during torque applications.
• Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter.
• Powered by a standard 9V battery, providing up to 50 hours run time.
• N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester.
• Optional all-steel stand (J6470S) provides a strong support with minimal footprint.
• Testers meet or exceed requirements set forth in ASME B107.29

Specifications

Drive Size [in] 1/4

Increments [Ft Lbs] 0.01

Increments [In Lbs] 0.01

Torque Range [Ft Lbs] 0.42-4.17

Torque Range [In Lbs] 5-50

Torque Range [Nm] 0.56-5.65

Increments [Nm] 0.01

Width [in] 6

Height [in] 4-1/2

Maximum Torque [Nm] 5.65

Minimum Torque [Nm] 0.56

Overall Length [in] 6

Weight [Lbs] 6.00

Style Electronic Torque Tester

Specification ASME ASME B107.29