Schneider Electric XACA282 Harmony Xac Pendant Control Station 2 Pb

• Control Station Type: Double insulated
• Enclosure Material: Polypropylene
• Electrical Circuit Type: Control circuit
• Enclosure Type: Complete ready for use
• Control Station Application: Control of 2-speed hoist motor
• Control Station Composition: 2 push-buttons
• Control button type:
• 1 push-button 1 NC + 1 NO + 1 NO raise, slow-fast
• 2 push-buttons 1 NC + 1 NO + 1 NO lower, slow-fast
• Product Compatibility: XENG1191 for each direction
• Mechanical Interlocking: With mechanical interlocking
• Control Station Colour: Yellow
• Connections - Terminals:
• Screw clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable end
• Screw clamp terminals, 1 x 0.5...2 x 1.5 mm² with cable end
• Standards:
• UL 508
• CSA C22.2 No 14
• EN/IEC 60947-5-1
• EN/ISO 13850: 2006
• EN/IEC 60204-32
• Product Certifications: GOST
• Protective Treatment: TH
• Ambient Air Temperature for Operation: -25…70 °C
• Ambient Air Temperature for Storage: -40…70 °C
• Vibration Resistance: 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
• Shock Resistance: 100 gn conforming to IEC 60068-2-27
• Overvoltage Category: Class II conforming to IEC 61140
• IP Degree of Protection: IP65 conforming to IEC 60529
• IK Degree of Protection: IK08 conforming to EN 50102
• Mechanical Durability: 1,000,000 cycles
• Cable Entry: Rubber sleeve with stepped entry 8…26 mm
• Contact Code Designation:
• A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A
• A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A
• Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A
• Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A
• [Ithe] conventional enclosed thermal current: 10 A
• [Ui] rated insulation voltage:
• Emergency stop contact: 400 V (pollution degree 3) conforming to IEC 60947-1
• 600 V (pollution degree 3)
• [Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947-1
• Contact Operation: Slow-break
• Maximum Resistance Across Terminals: 25 MOhm
• Operating Force:
• 13 N push-button
• 14 N emergency stop
• Short-Circuit Protection: 10 A fuse protection by cartridge fuse type gG
• Rated Operational Power in W:
• 40 W DC-13 for 1,000,000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
• 48 W DC-13 for 1,000,000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
• 65 W DC-13 for 1,000,000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
• Terminals Description ISO n°1:
• (13-14)NO
• (11-12)NC
• Terminals Description ISO n°2:
• (11-12)NC
• (31-32)NC
• (21-22)NC
• Terminal Identifier:
• (11-12)NC
• (13-14)NO
• Net Weight: 0.5 kg