Shopping List
购物清单
CNY - ¥
Image
/
/
/
/
SPANJAARD/西班牙人 ADF(空气干燥膜)SPANJ-AAADF-325ML SPR
SPANJAARD/西班牙人 ADF(空气干燥膜)SPANJ-AAADF-325ML SPR
Image
Image
产品描述

Spanjaard Adf (air Drying Film) SPANJ-aaADF-325ML SPR

Product Description
Spanjaard ADF (Air Drying Film) is a dispersion of very fine particles of Molybdenum Disulphide in an air drying resin. It provides lubrication when oils and greases cannot be used. It is available in bulk as well as in an aerosol spray. 

Applications
- Pre-Assembly Treatment 

Spanjaard ADF provides protection from scuffing and other assembly problems during running in. With the aerosol can, it is possible to apply an extremely thin film which will not interfere with normal assembly tolerances. The average particle size of MoS2 is 0,4 micron. 

- Protective Coating 

Spanjaard ADF prevents corrosion during shipping and storage. Thus expensive parts can be protected from rust and are pre-lubricated, ready for immediate use. Spanjaard ADF provides a protective coating resistant to nearly all acids and alkali (including nitric acid). 

- High Temperature Lubrication 

Spanjaard ADF provides a stable lubricating film at temperatures of -20°C to 350°C. Even though resin breakdown starts at this temperature, the Molybdenum Disulphide continues to act as a dry lubricant up to 450°C (or higher if air access is reduced). Spanjaard ADF is widely used as a high temperature lubricant in the steel industry. 

- Dry Lubrication 

Spanjaard ADF is the answer when problems are caused by the application of conventional wet lubricants and provides dry lubrication in dusty conditions. 

Spanjaard ADF is used to lubricate and protect humble hooks in the mining industry.

- Cutting ToolsGreat benefit can be derived by the use of Spanjaard ADF on Cutting Tools. For maximum effectiveness the tools should be ground crosswise to the direction of chip flow to provide reservoirs of Molybdenum Disulphide.

- Plastic Surfaces
Spanjaard ADF can be used to advantage on many plastic surfaces such as nylon bearings.

Application Instruction

1. Thoroughly degrease the component to be treated, preferably with a safety solvent, e.g. Spanjaard Electric Motor Cleaner which leave no residue.

2. Shake the aerosol can vigorously and apply one or more thin layers of Air Drying Film, allowing 3 minutes drying for each coat. If bulk is used, stir product and dip, spray or brush on a thin coat.

3. For aerosol coating, wait 24 hours for the resin to cure at room temperature or cure at 250 Degree Celcius for one hour. Thicker coats applied by dipping brush or spray gun might require longer curing.

¥ 104.96
Units折扣单价
1-¥ 104.96
数量:
EA
Image
需要 4 个工作日的交货时间。
物品将在指定的交货时间内准备好发货。
This item is sold by
Image
MY-0750104865
Highly Matched Items
View items that have the same or are a close match to the specifications of this item
来自 Spanjaard 的 Lubricants
寻找和比较同类产品
更多来自 Lubricants
用更广泛的选择扩大您的搜索范围
最近浏览过的 产品
比较和参考以前查看的项目
Image
最佳
Image