Multi MCL-800DXR Leakage Current Clamp

• Measuring Method: Dual slope integration mode
• Measurement Range:
• AC 20mA/200mA/2A/20A/200A/1000A/Auto RMS
• Accuracy: 23℃±5℃, 80%RH or less (50/60Hz)
• Range/Resolution/Accuracy:
• AC 20mA/0.01mA/±2.0% rdg ± 5 dgt
• AC 200mA/0.1mA/±2.0% rdg ± 5 dgt
• AC 2A/1mA/±2.0% rdg ± 5 dgt
• AC 20A/10mA/±2.0% rdg ± 5 dgt
• AC 200A/0.1A/±2.0% rdg ± 5 dgt
• AC 1000A/1A/±2.0% rdg ± 5 dgt
• Filter Function: Low pass filter : 150Hz
• Max Memory Function: "Max" mark on LCD with maximum value
• Auto Power Function: It powers off approximately 10 minutes after final operation. This function will be disabled during MAX-hold/Bluetooth is on.
• Over Range Indication: Only the manual ranges are displayed up to 110% of the setting range (Excluding 1000A range). "OL" mark on LCD
• Data Hold Indication: "DH" mark on LCD with data hold value
• Low Battery Indication: "Battery" icon on LCD
• Sampling: 2 times/sec
• Jaw Opening Capability: 80mm x 74mm
• Withstanding Voltage: AC 3700V 1 minute max. (Between the core of CT and outer case)
• Limitation of Circuit Voltage: Less than AC 600V (EN61010 Installation category CAT III 300V)
• Operating Temperature: 0℃ to 50℃, 85%RH max. (Without condensation)
• Storage Temperature: -10℃ to 60℃, 80%RH max. (Without condensation)
• Power Supply: 1.5V (AM-4, LR03, or AAA)×3
• Size: 138(W)×237(H)×46(D)mm
• Weight: Approx. 650g
• Accessories:
• Hard carrying case: 1
• Instruction manual: 1
• Batteries: 3
• Interface: Bluetooth 4.2