AF Hydro

Pipe Union

Kesatuan Paip

สหภาพท่อ

pipe-union

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

管件

Pipe Fittings

pipe fittings

Perlengkapan Pipa

Kelengkapan Paip

อุปกรณ์ท่อ

pipe-fittings

Pipe union fitting extends the pipeline by attaching pipes without any deformation. A pipe union has three parts which are the female end, male end, and the nut. The nut exert pressure onto the female and male end, hence providing the necessary pressure to seal the fitting. If there is too much pressure, the locking screw breaks. This separates the union fitting, hence releasing the pipes without causing any damage or deformities. 

Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  

The threaded ends ease installation and provide a tighter connection. Welding is not required.

Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.

Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.

To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. 

Remove any excess tape and tighten the joints. 

Do avoid excessive screwing as it may damage the pipe or the fitting. 

Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.

<h3 class="md-block-header-three"><strong class="md-inline-bold">About This Product</strong></h3><p class="md-block-unstyled">Pipe union fitting extends the pipeline by attaching pipes without any deformation. A pipe union has three parts which are the female end, male end, and the nut. The nut exert pressure onto the female and male end, hence providing the necessary pressure to seal the fitting. If there is too much pressure, the locking screw breaks. This separates the union fitting, hence releasing the pipes without causing any damage or deformities. </p><h3 class="md-block-header-three"><strong class="md-inline-bold">More About #150 Fittings</strong></h3><p class="md-block-unstyled">Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  </p><ul class="md-block-unordered-list-item"><li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li><li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li><li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">How to Connect #150 Fittings?</strong></h3><ol class="md-block-ordered-list-item"><li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. </li><li>Remove any excess tape and tighten the joints. </li><li>Do avoid excessive screwing as it may damage the pipe or the fitting. </li><li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li></ol>

<h3><strong>About This Product</strong></h3>
<p>Pipe union fitting extends the pipeline by attaching pipes without any deformation. A pipe union has three parts which are the female end, male end, and the nut. The nut exert pressure onto the female and male end, hence providing the necessary pressure to seal the fitting. If there is too much pressure, the locking screw breaks. This separates the union fitting, hence releasing the pipes without causing any damage or deformities.&nbsp;</p>
<h3><strong>More About #150 Fittings</strong></h3>
<p>Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.&nbsp;&nbsp;</p>
<ul>
<li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li>
<li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li>
<li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li>
</ul>
<h3><strong>How to Connect #150 Fittings?</strong></h3>
<ol>
<li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.&nbsp;</li>
<li>Remove any excess tape and tighten the joints.&nbsp;</li>
<li>Do avoid excessive screwing as it may damage the pipe or the fitting.&nbsp;</li>
<li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li>
</ol>


1 1/4"NPT Female Stainless Steel SS316 Pipe Union Fitting 150 Psi

1/4"npt female stainless steel ss316 pipe union fitting 150psi 1/4 "npt wanita pipa af hydro keluli tahan karat pemasangan kesatuan paip 内螺纹不锈钢 管接头 af水电

Merek:	AF Hydro
Model:	Class #150 Series Union

Tentang Produk Ini

Lebih Lanjut Tentang #150 Fitting

Bagaimana Menghubungkan Fitting #150?