AF Hydro

Pipe Tee

Tee pipa

Tee Paip

ตี๋ท่อ

pipe-tee

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

管件

Pipe Fittings

pipe fittings

Perlengkapan Pipa

Kelengkapan Paip

อุปกรณ์ท่อ

pipe-fittings

A pipe tee is a T-shaped fitting. It has three ports, and it is used to connect tubes and pipes at a 90-degree angle to the main line. It can also divert the fluid flow. There are two types of pipe tee fittings, equal pipe tee and reducing pipe tee. The difference between reducing pipe tee with equal pipe tee lies in the opening size of the ports. Reducing pipe tee has 2 similar and 1 different port size. Reduced pipe tee connects tubes or pipes with different diameter together. The connection type for pipe tee fitting is three female ends. The NPT (tapered) thread on one end connection makes it easy to assemble and disassemble during maintenance and installation. 

Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  

The threaded ends ease installation and provide a tighter connection. Welding is not required.

Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.

Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.

To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. 

Remove any excess tape and tighten the joints. 

Do avoid excessive screwing as it may damage the pipe or the fitting. 

Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.

<h3 class="md-block-header-three"><strong class="md-inline-bold">About This Product</strong></h3><p class="md-block-unstyled">A pipe tee is a T-shaped fitting. It has three ports, and it is used to connect tubes and pipes at a 90-degree angle to the main line. It can also divert the fluid flow. There are two types of pipe tee fittings, equal pipe tee and reducing pipe tee. The difference between reducing pipe tee with equal pipe tee lies in the opening size of the ports. Reducing pipe tee has 2 similar and 1 different port size. Reduced pipe tee connects tubes or pipes with different diameter together. The connection type for pipe tee fitting is three female ends. The NPT (tapered) thread on one end connection makes it easy to assemble and disassemble during maintenance and installation. </p><h3 class="md-block-header-three"><strong class="md-inline-bold">More About #150 Fittings</strong></h3><p class="md-block-unstyled">Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  </p><ul class="md-block-unordered-list-item"><li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li><li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li><li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">How to Connect #150 Fittings?</strong></h3><ol class="md-block-ordered-list-item"><li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. </li><li>Remove any excess tape and tighten the joints. </li><li>Do avoid excessive screwing as it may damage the pipe or the fitting. </li><li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li></ol>

<h3><strong>About This Product</strong></h3>
<p>A pipe tee is a T-shaped fitting. It has three ports, and it is used to connect tubes and pipes at a 90-degree angle to the main line. It can also divert the fluid flow. There are two types of pipe tee fittings, equal pipe tee and reducing pipe tee. The difference between reducing pipe tee with equal pipe tee lies in the opening size of the ports. Reducing pipe tee has 2 similar and 1 different port size. Reduced pipe tee connects tubes or pipes with different diameter together. The connection type for pipe tee fitting is three female ends. The NPT (tapered) thread on one end connection makes it easy to assemble and disassemble during maintenance and installation.&nbsp;</p>
<h3><strong>More About #150 Fittings</strong></h3>
<p>Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.&nbsp;&nbsp;</p>
<ul>
<li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li>
<li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li>
<li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li>
</ul>
<h3><strong>How to Connect #150 Fittings?</strong></h3>
<ol>
<li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.&nbsp;</li>
<li>Remove any excess tape and tighten the joints.&nbsp;</li>
<li>Do avoid excessive screwing as it may damage the pipe or the fitting.&nbsp;</li>
<li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li>
</ol>


2" X 1/2"NPT Female Stainless Steel SS316 Reduced Tee Pipe Fitting 150 Psi

2" 1/2"npt female stainless steel ss316 reduced tee pipe fitting 150psi "x 1/2" npt wanita mengurangi pemasangan pipa af hydro keluli tahan karat paip terkurang 内螺纹不锈钢 异径三通管接头 af水电

Merek:	AF Hydro
Model:	Class #150 Series Reducing Tee

Tentang Produk Ini

Lebih lanjut Tentang #150 Fitting

Bagaimana Menghubungkan Fitting #150?