Electrical Tapes

เทปพันสายไฟ

electrical-tapes

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

胶带

Tape 

tape 

Pita Perekat

Tape

เทป

tape

 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Blue (gu)

3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.

Primary electrical insulation for all wire and cable rated up to 600 volts.

Protective jacketing for cable splices and repairs.

The tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.

Temflex 1500 Electrical Tape is stable under normal storage conditions.

Dielectric Strength (ASTM D-1000): 1000 V/mil

Breaking Strength (ASTM D-1000): 12 lbs/in

<h3 class="md-block-header-three"> 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Blue (gu)</h3>3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.Applications<ul class="md-block-unordered-list-item"><li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li><li>Protective jacketing for cable splices and repairs.</li><li>Harnessing of wires and cables.</li><li>For indoor and outdoor applications. </li></ul>Installation TechniqueThe tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.MaintenanceTemflex 1500 Electrical Tape is stable under normal storage conditions.Test Method: Typical Value<ul class="md-block-unordered-list-item"><li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li><li>Flammability (UL 510 Method): Pass</li><li>Thickness (ASTM D-1000): 5 mils</li><li>Elongation (ASTM D-1000): 150%</li><li>Breaking Strength (ASTM D-1000): 12 lbs/in</li><li>Adhesion (ASTM D-1000):</li><ul class="md-block-unordered-list-item"><li>To Steel: 14 oz/in</li><li>To Backing: 14 oz/in</li></ul></ul>

<h3> 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Blue (gu)</h3>
3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.
Applications
<ul>
<li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li>
<li>Protective jacketing for cable splices and repairs.</li>
<li>Harnessing of wires and cables.</li>
<li>For indoor and outdoor applications.&nbsp;</li>
</ul>
Installation Technique
The tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.
Maintenance
Temflex 1500 Electrical Tape is stable under normal storage conditions.
Test Method: Typical Value
<ul>
<li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li>
<li>Flammability (UL 510 Method): Pass</li>
<li>Thickness (ASTM D-1000): 5 mils</li>
<li>Elongation (ASTM D-1000): 150%</li>
<li>Breaking Strength (ASTM D-1000): 12 lbs/in</li>
<li>Adhesion (ASTM D-1000):</li>
<ul>
<li>To Steel: 14 oz/in</li>
<li>To Backing: 14 oz/in</li>
</ul>
</ul>

Merek:	3M
Model:	fafb87ca25

Pita Listrik Temflex 1500 3M (18MM X 5M X 0.13MM) (10Rol) Biru (gu)