GOOT

Solder Wire 

solder-wire

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

电线 & 电缆

Cables & Wires

cables & wires

Kabel

Kabel & Wayar

สายเคเบิลและสายไฟ

cables-wires

Goot CP3015 Desoldering Wick (3.0MM X 1.5M)

Desoldering braid, also known as desoldering wick or solder wick, is finely braided 18 to 42 AWG copper wire coated with rosin flux, usually supplied on a roll.


The end of a length of braid is placed over the soldered connections of a component being removed. The connections are heated with a soldering iron until the solder melts and is wicked into the braid by capillary action. The braid is removed while the solder is still molten, its used section cut off and discarded when cool. Short lengths of cut braid will prevent heat being carried away by the braid instead of heating the joint. 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Goot CP3015 Desoldering Wick (3.0MM X 1.5M)</strong></h3><p class="md-block-unstyled">Desoldering braid, also known as desoldering wick or solder wick, is finely braided 18 to 42 AWG copper wire coated with rosin flux, usually supplied on a roll.<br/></p><p class="md-block-unstyled">The end of a length of braid is placed over the soldered connections of a component being removed. The connections are heated with a soldering iron until the solder melts and is wicked into the braid by capillary action. The braid is removed while the solder is still molten, its used section cut off and discarded when cool. Short lengths of cut braid will prevent heat being carried away by the braid instead of heating the joint. </p>

<h3><strong>Goot CP3015 Desoldering Wick (3.0MM X 1.5M)</strong></h3>
<p>Desoldering braid, also known as desoldering wick or solder wick, is finely braided 18 to 42 AWG copper wire coated with rosin flux, usually supplied on a roll.<br>
</p>
<p>The end of a length of braid is placed over the soldered connections of a component being removed. The connections are heated with a soldering iron until the solder melts and is wicked into the braid by capillary action. The braid is removed while the solder is still molten, its used section cut off and discarded when cool. Short lengths of cut braid will prevent heat being carried away by the braid instead of heating the joint.&nbsp;</p>


Merek:	GOOT
Model:	CP3015

Sumbu Pematrian Goot CP3015 (3.0MM X 1.5M)