HENKEL

密封胶

Sealants

Sealant

Pengedap

ซีลแลนท์

sealants

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

粘合剂

sealant

Bahan Pengedap

LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.

Semi-flexible, medium-strength anaerobic flange gasket

For active and inactive rigid metal flanges

Cures through minor surface contamination

Adapts to flange surface irregularities and gaps up to 0.25 mm

Reduces inventory costs – no need for large inventory of cut gaskets

Reduces process costs – eliminates manual assembly of conventional gaskets

<h3 class="md-block-header-three"><strong class="md-inline-bold">Henkel Loctite 518 50ml</strong></h3><p class="md-block-unstyled">LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.</p><ul class="md-block-unordered-list-item"><li>Semi-flexible, medium-strength anaerobic flange gasket</li><li>For active and inactive rigid metal flanges</li><li>Cures through minor surface contamination</li><li>Adapts to flange surface irregularities and gaps up to 0.25 mm</li><li>Gel-type consistency</li><li>Seals instantly against low pressure</li><li>Reduces inventory costs – no need for large inventory of cut gaskets</li><li>Resists high pressure when fully cured</li><li>No compression set or misaligned gaskets</li><li>Easy to automate</li><li>Reduces process costs – eliminates manual assembly of conventional gaskets</li></ul>

<h3><strong>Henkel Loctite 518 50ml</strong></h3>
<p>LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.</p>
<ul>
<li>Semi-flexible, medium-strength anaerobic flange gasket</li>
<li>For active and inactive rigid metal flanges</li>
<li>Cures through minor surface contamination</li>
<li>Adapts to flange surface irregularities and gaps up to 0.25 mm</li>
<li>Gel-type consistency</li>
<li>Seals instantly against low pressure</li>
<li>Reduces inventory costs – no need for large inventory of cut gaskets</li>
<li>Resists high pressure when fully cured</li>
<li>No compression set or misaligned gaskets</li>
<li>Easy to automate</li>
<li>Reduces process costs – eliminates manual assembly of conventional gaskets</li>
</ul>


Merek:	HENKEL
Model:	518