MEGGER

Insulation Testers

insulation-testers

测试 & 测量

Test & Measure

test & measure

Tes & Pengukuran

Ujian & Ukuran

การทดสอบและวัดผล

test-measure

Other Test & Measurement

other test & measurement

การทดสอบและการวัดอื่นๆ

other-test-measurement

 The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. This model comes with Bluetooth download.  

 Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.

A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.

Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.

Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.

The range consists of four instruments:
MIT400/2 250 V, 500 V and 1000 V
MIT410/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio
MIT420/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and result storage
MIT430/2 50 V, 100 V, 250 V, 500 V and 1000 V +Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and Bluetooth download

Insulation testing up to 1000 V and 200 GΩ range

Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)

User variable insulation test voltage from 100V to 1000V (New) depending on model

Test result storage and Bluetooth® downloading depending on model

Rechargeable options for mains and car charging (New)depending on model

Red/Black Silicone test leads with Probes + Clips 

<p class="md-block-unstyled"> The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. This model comes with Bluetooth download.  </p><p class="md-block-unstyled"> Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.</p><p class="md-block-unstyled">A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.</p><p class="md-block-unstyled">Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.</p><p class="md-block-unstyled">Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.</p><p class="md-block-unstyled">The range consists of four instruments:<br/>MIT400/2 250 V, 500 V and 1000 V<br/>MIT410/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio<br/>MIT420/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and result storage<br/>MIT430/2 50 V, 100 V, 250 V, 500 V and 1000 V +Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and Bluetooth download</p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><ul class="md-block-unordered-list-item"><li>Construction sites</li><li>Renewable energy production</li><li>Assembly lines </li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">Key Features</strong></h3><ul class="md-block-unordered-list-item"><li>Insulation testing up to 1000 V and 200 GΩ range</li><li>Stabilised insulation test voltage (New)</li><li>Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)</li><li>600 V Trms AC and DC voltage measurement</li><li>Live circuit detection and protection</li><li>User variable insulation test voltage from 100V to 1000V (New) depending on model</li><li>Test result storage and Bluetooth® downloading depending on model</li><li>Rechargeable options for mains and car charging (New)depending on model</li><li>CAT IV 600 V &amp; IP54</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">Includes : </strong></h3><ul class="md-block-unordered-list-item"><li>Red/Black Silicone test leads with Probes + Clips </li><li>SP5 remote switch probe (not MIT400/2) </li><li>Owners information CD </li><li>Batteries 6 x AA </li><li>Alkaline Hard carry case</li></ul>

<p>&nbsp;The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. This model comes with Bluetooth download. &nbsp;</p>
<p>&nbsp;Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.</p>
<p>A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.</p>
<p>Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.</p>
<p>Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.</p>
<p>The range consists of four instruments:<br>
MIT400/2 250 V, 500 V and 1000 V<br>
MIT410/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio<br>
MIT420/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and result storage<br>
MIT430/2 50 V, 100 V, 250 V, 500 V and 1000 V +Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and Bluetooth download</p>
<h3><strong>Applications</strong></h3>
<ul>
<li>Construction sites</li>
<li>Renewable energy production</li>
<li>Assembly lines&nbsp;</li>
</ul>
<h3><strong>Key Features</strong></h3>
<ul>
<li>Insulation testing up to 1000 V and 200 GΩ range</li>
<li>Stabilised insulation test voltage (New)</li>
<li>Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)</li>
<li>600 V Trms AC and DC voltage measurement</li>
<li>Live circuit detection and protection</li>
<li>User variable insulation test voltage from 100V to 1000V (New) depending on model</li>
<li>Test result storage and Bluetooth® downloading depending on model</li>
<li>Rechargeable options for mains and car charging (New)depending on model</li>
<li>CAT IV 600 V &amp; IP54</li>
</ul>
<h3><strong>Includes : </strong></h3>
<ul>
<li>Red/Black Silicone test leads with Probes + Clips&nbsp;</li>
<li>SP5 remote switch probe (not MIT400/2)&nbsp;</li>
<li>Owners information CD&nbsp;</li>
<li>Batteries 6 x AA&nbsp;</li>
<li>Alkaline Hard carry case</li>
</ul>


Merek:	MEGGER
Model:	1004-740

Aplikasi

Fitur Utama

Termasuk :