MEGGER

气象仪器与设备

Meteorological Instrumentation & Equipment

Instrumentasi & Peralatan Meteorologi

Instrumen & Kelengkapan Meteorlogi

เครื่องมือและอุปกรณ์อุตุนิยมวิทยา

meteorological-instrumentation-equipment

测试 & 测量

Test & Measure

test & measure

Tes & Pengukuran

Ujian & Ukuran

การทดสอบและวัดผล

test-measure

Other Test & Measurement

other test & measurement

การทดสอบและการวัดอื่นๆ

other-test-measurement

Megger's DET4TD2 is an enhanced earth loop tester that is capable of perform 2, 3 and 4 point testing with selectable 25V or 50V output.

Suitable for use both indoors and outdoors thanks to IP54 rating (protection from dust and water jets) the Megger DET4TD2 is easy to connect up, and tests are easily chosen and initiated by use of the large rotary dial and test button. There's also a button built into the front of the instrument for switching between 25 and 50V modes.

This earth tester will also automatically evaluate and display the connection and condition of any connected P and C spikes, showcasing the results on the built-in LCD screen. You can also use the DET4TD2 to get an accurate measurement of ground voltage thanks to a built in voltmeter, and this instrument is also able to measure earth voltages up 100V, as well as resistance measurements from 0.01Ω to 20kΩ (with resistance accuracy of 2%±3 digits).

The Megger DET4TD2 is a non-rechargeable instrument and runs on 8 x AA batteries. Its sister tester, the DET4TR2, is rechargeable.

This product complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs, provided a leadset with this rating is used. The DET4TD2 is also in compliance with KEMA K85B and EN61557 "Electrical safety in low voltage distribution systems up to 1000V a.c and 1500V d.c - Equipment for testing measuring or monitoring of protective measures".

2, 3 and 4 wire testing with no shorting links required

Instrument output voltage of ±25V or ±50V at 128Hz

Instrument current output at 4.5mA or 0.45mA

Right Angle Terminal Adaptors (to connect bare wires to terminals)

<h3 class="md-block-header-three"><strong class="md-inline-bold">Megger  Earth Tester DET4TD2</strong> </h3><p class="md-block-unstyled">Megger&#x27;s DET4TD2 is an enhanced earth loop tester that is capable of perform 2, 3 and 4 point testing with selectable 25V or 50V output.</p><p class="md-block-unstyled">Suitable for use both indoors and outdoors thanks to IP54 rating (protection from dust and water jets) the Megger DET4TD2 is easy to connect up, and tests are easily chosen and initiated by use of the large rotary dial and test button. There&#x27;s also a button built into the front of the instrument for switching between 25 and 50V modes.</p><p class="md-block-unstyled">This earth tester will also automatically evaluate and display the connection and condition of any connected P and C spikes, showcasing the results on the built-in LCD screen. You can also use the DET4TD2 to get an accurate measurement of ground voltage thanks to a built in voltmeter, and this instrument is also able to measure earth voltages up 100V, as well as resistance measurements from 0.01Ω to 20kΩ (with resistance accuracy of 2%±3 digits).</p><p class="md-block-unstyled">The Megger DET4TD2 is a non-rechargeable instrument and runs on 8 x AA batteries. Its sister tester, the DET4TR2, is rechargeable.</p><p class="md-block-unstyled">This product complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs, provided a leadset with this rating is used. The DET4TD2 is also in compliance with KEMA K85B and EN61557 &quot;Electrical safety in low voltage distribution systems up to 1000V a.c and 1500V d.c - Equipment for testing measuring or monitoring of protective measures&quot;.</p><h2 class="md-block-header-two">Megger DET4TD2 Key Features</h2><ul class="md-block-unordered-list-item"><li>2, 3 and 4 wire testing with no shorting links required</li><li>IP54 ingress protection</li><li>C spike, p stake and noise checks</li><li>Noise rejection 40V peak to peak</li><li>Instrument output voltage of ±25V or ±50V at 128Hz</li><li>Instrument current output at 4.5mA or 0.45mA</li><li>Resistance range of 0.01 to 20kΩ</li><li>Earth voltage range of 0-100V</li><li>LCD display</li><li>Easy to use</li><li>Runs on 8 x AA batteries</li></ul><h2 class="md-block-header-two">Full List of Products Included</h2><ul class="md-block-unordered-list-item"><li>Megger DET4TD2 Earth Tester</li><li>Hard Carry Case</li><li>Stake and Wire Kit (15m, 10m and 3m)</li><li>Right Angle Terminal Adaptors (to connect bare wires to terminals)</li><li>Calibration Certificate</li><li>Batteries</li></ul>

<h3><strong>Megger  Earth Tester DET4TD2</strong>&nbsp;</h3>
<p>Megger's DET4TD2 is an enhanced earth loop tester that is capable of perform 2, 3 and 4 point testing with selectable 25V or 50V output.</p>
<p>Suitable for use both indoors and outdoors thanks to IP54 rating (protection from dust and water jets) the Megger DET4TD2 is easy to connect up, and tests are easily chosen and initiated by use of the large rotary dial and test button. There's also a button built into the front of the instrument for switching between 25 and 50V modes.</p>
<p>This earth tester will also automatically evaluate and display the connection and condition of any connected P and C spikes, showcasing the results on the built-in LCD screen. You can also use the DET4TD2 to get an accurate measurement of ground voltage thanks to a built in voltmeter, and this instrument is also able to measure earth voltages up 100V, as well as resistance measurements from 0.01Ω to 20kΩ (with resistance accuracy of 2%±3 digits).</p>
<p>The Megger DET4TD2 is a non-rechargeable instrument and runs on 8 x AA batteries. Its sister tester, the DET4TR2, is rechargeable.</p>
<p>This product complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs, provided a leadset with this rating is used. The DET4TD2 is also in compliance with KEMA K85B and EN61557 "Electrical safety in low voltage distribution systems up to 1000V a.c and 1500V d.c - Equipment for testing measuring or monitoring of protective measures".</p>
<h2>Megger DET4TD2 Key Features</h2>
<ul>
<li>2, 3 and 4 wire testing with no shorting links required</li>
<li>IP54 ingress protection</li>
<li>C spike, p stake and noise checks</li>
<li>Noise rejection 40V peak to peak</li>
<li>Instrument output voltage of ±25V or ±50V at 128Hz</li>
<li>Instrument current output at 4.5mA or 0.45mA</li>
<li>Resistance range of 0.01 to 20kΩ</li>
<li>Earth voltage range of 0-100V</li>
<li>LCD display</li>
<li>Easy to use</li>
<li>Runs on 8 x AA batteries</li>
</ul>
<h2>Full List of Products Included</h2>
<ul>
<li>Megger DET4TD2 Earth Tester</li>
<li>Hard Carry Case</li>
<li>Stake and Wire Kit (15m, 10m and 3m)</li>
<li>Right Angle Terminal Adaptors (to connect bare wires to terminals)</li>
<li>Calibration Certificate</li>
<li>Batteries</li>
</ul>


Megger DET4TD2 4-Terminal Earth Resistance and Soil Resistivity Testers

megger det4td2 4-terminal earth resistance soil resistivity testers dan tester meteorological instrumentation equipment instrumentasi peralatan meteorologi rintangan bumi penguji tanah instrumen kelengkapan meteorlogi megger/麦格 端子接地电阻和土壤电阻率测试仪 气象仪器与设备 麦格

Merek:	MEGGER
Model:	1000-347

Megger Earth Tester DET4TD2

Fitur Utama Megger DET4TD2

Daftar Lengkap Produk Termasuk