Mr McKenic

Anti Rust Coatings

anti-rust-coatings

机械设备

Machinery

machinery

Mesin

Jentera

เครื่องจักร

润滑 & 脱脂

Lubricants & Degreasers

lubricants & degreasers

Pelumas & Degreaser

Pelincir & Penyahgris

น้ำมันหล่อลื่นและน้ำยาขจัดคราบน้ำมัน

lubricants-degreasers

Mr McKenic® – 9-in-1 Technology Oil is a multi-functional product with a wide variety of applications with its lubricating, corrosion-inhibiting, penetrating and cleaning properties. An effective solution in many situations from lubricating moving parts to maintenance of equipment, Mr McKenic® – 9-in-1 Technology Oil is an essential product in every tool box.


Displaces Moisture & Prevents Short-Circuit

Always apply on a piece of clean cloth and test on a small area before applying on non-metal, painted or any other sensitive surfaces.

Fit straw onto nozzle to reach inaccessible areas.

To lubricate, spray directly onto targeted areas.

To treat rusted parts, spray directly to saturate target areas. Allow to soak for 5-10 minutes.

To displace moisture, spray onto contact points.

To prevent rust, first treat rusted areas, then re-spray directly onto target area to leave a layer of protection. Do not wipe off.

Use short bursts instead of a long continuous spray.

Product can be applied using soak, spray and brush methods. Put on Personal Protective Equipment.

Pour Mr McKenic® – 9-in-1 Technology Oil slowly into a chemical-resistant container or sprayer.

To lubricate, either use a sprayer to spray directly onto target areas or soak moving components for 1-2 mins before bringing them out to drip-dry. Do not wipe off.

To treat rusted parts, allow rusty components to soak for 5-10 mins. Agitate rusted surface by means of a copper brush. Wipe off with a clean cloth. Repeat if necessary.

To prevent rust, allow components to soak for 1-2 mins before bringing them out to drip-dry. Do not wipe off.

<h3 class="md-block-header-three">Mr Mckenic 9-in-1 Technology Oil 450G</h3>Packing: 24cans/cartonMinimum order: 2 cartonsMr McKenic® – 9-in-1 Technology Oil is a multi-functional product with a wide variety of applications with its lubricating, corrosion-inhibiting, penetrating and cleaning properties. An effective solution in many situations from lubricating moving parts to maintenance of equipment, Mr McKenic® – 9-in-1 Technology Oil is an essential product in every tool box. Features:<ul class="md-block-unordered-list-item"><li>Low Surface Tension</li><li>High Penetration Power</li><li>Displaces Moisture &amp; Prevents Short-Circuit</li><li>Prevents &amp; Remove Rust</li><li>Lubricates</li><li>Prevents Overheating</li><li>Non-Flammable</li><li>Odourless</li><li>Withstands Temperature</li><li>Cleans Stubborn Stains</li></ul><h4 class="md-block-header-four">Direction for use:</h4>Always apply on a piece of clean cloth and test on a small area before applying on non-metal, painted or any other sensitive surfaces.For Aerosol Can Packing:<ul class="md-block-unordered-list-item"><li>Shake Can well before use.</li><li>Fit straw onto nozzle to reach inaccessible areas.</li><li>To lubricate, spray directly onto targeted areas.</li><li>To treat rusted parts, spray directly to saturate target areas. Allow to soak for 5-10 minutes.</li><li>Agitate if necessary.</li><li>To displace moisture, spray onto contact points.</li><li>To prevent rust, first treat rusted areas, then re-spray directly onto target area to leave a layer of protection. Do not wipe off.</li><li>Use short bursts instead of a long continuous spray.</li></ul>For Bulk Packing:<ul class="md-block-unordered-list-item"><li>Product can be applied using soak, spray and brush methods. Put on Personal Protective Equipment.</li><li>Pour Mr McKenic® – 9-in-1 Technology Oil slowly into a chemical-resistant container or sprayer.</li><li>To lubricate, either use a sprayer to spray directly onto target areas or soak moving components for 1-2 mins before bringing them out to drip-dry. Do not wipe off.</li><li>To treat rusted parts, allow rusty components to soak for 5-10 mins. Agitate rusted surface by means of a copper brush. Wipe off with a clean cloth. Repeat if necessary.</li><li>To prevent rust, allow components to soak for 1-2 mins before bringing them out to drip-dry. Do not wipe off.</li></ul>

<h3>Mr Mckenic 9-in-1 Technology Oil 450G</h3>
Packing: 24cans/carton
Minimum order: 2 cartons
Mr McKenic® – 9-in-1 Technology Oil is a multi-functional product with a wide variety of applications with its lubricating, corrosion-inhibiting, penetrating and cleaning properties. An effective solution in many situations from lubricating moving parts to maintenance of equipment, Mr McKenic® – 9-in-1 Technology Oil is an essential product in every tool box. 

Features:
<ul>
<li>Low Surface Tension</li>
<li>High Penetration Power</li>
<li>Displaces Moisture &amp; Prevents Short-Circuit</li>
<li>Prevents &amp; Remove Rust</li>
<li>Lubricates</li>
<li>Prevents Overheating</li>
<li>Non-Flammable</li>
<li>Odourless</li>
<li>Withstands Temperature</li>
<li>Cleans Stubborn Stains</li>
</ul>
<h4>Direction for use:</h4>
Always apply on a piece of clean cloth and test on a small area before applying on non-metal, painted or any other sensitive surfaces.
For Aerosol Can Packing:
<ul>
<li>Shake Can well before use.</li>
<li>Fit straw onto nozzle to reach inaccessible areas.</li>
<li>To lubricate, spray directly onto targeted areas.</li>
<li>To treat rusted parts, spray directly to saturate target areas. Allow to soak for 5-10 minutes.</li>
<li>Agitate if necessary.</li>
<li>To displace moisture, spray onto contact points.</li>
<li>To prevent rust, first treat rusted areas, then re-spray directly onto target area to leave a layer of protection. Do not wipe off.</li>
<li>Use short bursts instead of a long continuous spray.</li>
</ul>
<ins>For Bulk Packing:</ins>
<ul>
<li>Product can be applied using soak, spray and brush methods. Put on Personal Protective Equipment.</li>
<li>Pour Mr McKenic® – 9-in-1 Technology Oil slowly into a chemical-resistant container or sprayer.</li>
<li>To lubricate, either use a sprayer to spray directly onto target areas or soak moving components for 1-2 mins before bringing them out to drip-dry. Do not wipe off.</li>
<li>To treat rusted parts, allow rusty components to soak for 5-10 mins. Agitate rusted surface by means of a copper brush. Wipe off with a clean cloth. Repeat if necessary.</li>
<li>To prevent rust, allow components to soak for 1-2 mins before bringing them out to drip-dry. Do not wipe off.</li>
</ul>

Mr Mckenic 9-in-1 Technology Oil 450G (24cans/carton)

mr mckenic 9-in-1 technology oil 450g (24cans/carton) (24 kaleng/karton) anti rust coatings minyak teknologi 9-dalam-1 (24tin/kadbod) mckenic/麦坚尼先生 科技油 450g（24 罐/箱） 麦坚尼先生

Merek:	Mr McKenic
Model:	8.89E+12

Oli Teknologi Mr Mckenic 9-in-1 450G

Arah penggunaan: