SCHNEIDER ELECTRIC

Circuit Breaker Accessories

circuit-breaker-accessories

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

电气配件

Electrical Accessories

electrical accessories

Aksesoris Listrik

Aksesori Elektrik

อุปกรณ์ไฟฟ้า

electrical-accessories

Schneider Electric 50441 Closed Toroid for Residual Current Protection Sa - Ø 200 Mm

     CLOSED   TOROID SA200 DIA. 200MM This toroid is dedicated to Vigilohm Insulation Fault   locators, and to VigiPacT type A residual current protection and monitoring   relays. It allows the monitoring of the injected component from Vigilohm   Insulation Monitor, and the measurement of a current rating up to 400A for   VigiPacT monitoring and protection relays. The transformer ratio is   1/1000. The inner diameter of the   toroid is 200mm and the weight is 1.320kg. The cables must be centered within   the toroid and the diameter represented by all these cables should not exceed   100 millimetres. The maximum cross section per phase (R, S, T, N) is 2 cables   of 185mm² for a copper conductor.     

Schneider Electric 50441 Closed Toroid for Residual Current Protection Sa - Ø 200 Mm CLOSED TOROID SA200 DIA. 200MM This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 400A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 200mm and the weight is 1.320kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 100 millimetres. The maximum cross section per phase (R, S, T, N) is 2 cables of 185mm² for a copper conductor.

Schneider Electric 50441 Closed Toroid for Residual Current Protection Sa - Ø 200 Mm
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;CLOSED TOROID SA200 DIA. 200MM This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 400A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 200mm and the weight is 1.320kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 100 millimetres. The maximum cross section per phase (R, S, T, N) is 2 cables of 185mm² for a copper conductor.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Data Sheet

schneider electric 50441 closed toroid residual current protection sa 200mm tertutup untuk perlindungan arus sisa circuit breaker accessories baki electric/施耐德电气 用于剩余电流保护的闭合环形线圈 施耐德电气

schneider-electric-50441-closed-toroid-for-residual-current-protection-sa-200-mm