250 V conforming to IEC
300 V conforming to CSA
300 V conforming to UL
[Ie] Rated Operational Current
15 A at 277 V (AC) conforming to UL
15 A at 28 V (DC) conforming to UL
15 A at 250 V (AC) NO conforming to IEC
15 A at 28 V (DC) NO conforming to IEC
7.5 A at 250 V (AC) NC conforming to IEC
7.5 A at 28 V (DC) NC conforming to IEC
Operating Rate
<= 1200 cycles/hour under load
<= 18000 cycles/hour no-load
Control Type
Lockable test button
This spec is not available in the specification table.
Device Short Name
RPM
This spec is not available in the specification table.
Product or Component Type
Plug-in relay
This spec is not available in the specification table.
Range of Product
Harmony Electromechanical Relays
This spec is not available in the specification table.
[Uimp] Rated Impulse Withstand Voltage
4 kV during 1.2/50 µs
This spec is not available in the specification table.
Pollution Degree
3
This spec is not available in the specification table.
Mechanical Durability
10000000 cycles
This spec is not available in the specification table.
Ambient Air Temperature for Storage
-40…85 °C
This spec is not available in the specification table.
Electrical Durability
100000 cycles for resistive load
This spec is not available in the specification table.
Device Presentation
Complete product
This spec is not available in the specification table.
[Uc] control circuit voltage
230 V AC 50/60 Hz
This spec is not available in the specification table.
Product certifications
EAC
CSA
UL
This spec is not available in the specification table.
Contacts type and composition
4 C/O
This spec is not available in the specification table.
Operating Position
Any position
This spec is not available in the specification table.
Shock Resistance
15 gn for in operation
30 gn for not operating
This spec is not available in the specification table.
Vibration Resistance
3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation
5 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating
This spec is not available in the specification table.
Dielectric Strength
1500 V AC between contacts with micro disconnection
2000 V AC between coil and contact with reinforced
2000 V AC between poles with basic
This spec is not available in the specification table.
[Ithe] conventional enclosed thermal current
15 A at -40…55 °C
This spec is not available in the specification table.
Series Name
Power
This spec is not available in the specification table.
Status LED
With
This spec is not available in the specification table.
Utilisation coefficient
20 %
This spec is not available in the specification table.
Shape of pin
Flat
This spec is not available in the specification table.
Maximum switching voltage
250 V conforming to IEC
This spec is not available in the specification table.
Maximum switching capacity
3750 VA
420 W
This spec is not available in the specification table.
Minimum switching capacity
170 mW at 10 mA, 17 V
This spec is not available in the specification table.
Drop-out voltage threshold
>= 0.15 Uc AC
This spec is not available in the specification table.
Operate time
20 ms at nominal voltage
This spec is not available in the specification table.
Release time
20 ms at nominal voltage
This spec is not available in the specification table.
Average coil resistance
7350 Ohm at 20 °C +/- 15 %
This spec is not available in the specification table.
Rated operational voltage limits
184...253 V AC
This spec is not available in the specification table.
Protection category
RT I
This spec is not available in the specification table.
Test levels
Level A group mounting
This spec is not available in the specification table.
Safety reliability data
B10d = 100000
This spec is not available in the specification table.
average coil consumption in VA
2.5 at 60 Hz
This spec is not available in the specification table.
Resistive load current
15 A at 250 V AC
15 A at 28 V DC
This spec is not available in the specification table.
Degree of protection (Housing only)
IP40 conforming to IEC 60529
This spec is not available in the specification table.