Spanjaard

除油剂

Degreasers

Degreaser

De-gris

น้ำยาล้างไขมัน

degreasers

机械设备

Machinery

machinery

Mesin

Jentera

เครื่องจักร

润滑 & 脱脂

Lubricants & Degreasers

lubricants & degreasers

Pelumas & Degreaser

Pelincir & Penyahgris

น้ำมันหล่อลื่นและน้ำยาขจัดคราบน้ำมัน

lubricants-degreasers

Spanjaard Mould Release (NON-SILICONE) SPANJ-MOULDR NS-400G SPR

 For use in injection moulding where parts need to be printed after manufacture and silicone mould release agents are therefore not suitable. 

Developed for the release of plastic injection moulded parts that require a non-silicone product to enable subsequent printing on the parts. Suitable for the manufacture of poly-carbonate injection mouldings such as telephones, where de-stressing is vital. Facilitates the release from moulds, forms and dies, continuous cure rolls, presses etc. Suitable for all types of plastics and rubbers. Penetrates and protects the mould. 

Spanjaard Mould Release (Non-Silicone) forms a heat-resistant wet film on the mould and can easily be removed by common solvents if necessary. 

Spanjaard Mould Release (Non-Silicone) does not contain silicones or PTFE. 

- Spray onto surface from a distance of 20cm. 

- One application is normally sufficient. 

<h3 class="md-block-header-three">Spanjaard Mould Release (NON-SILICONE) SPANJ-MOULDR NS-400G SPR</h3> For use in injection moulding where parts need to be printed after manufacture and silicone mould release agents are therefore not suitable. Application Developed for the release of plastic injection moulded parts that require a non-silicone product to enable subsequent printing on the parts. Suitable for the manufacture of poly-carbonate injection mouldings such as telephones, where de-stressing is vital. Facilitates the release from moulds, forms and dies, continuous cure rolls, presses etc. Suitable for all types of plastics and rubbers. Penetrates and protects the mould. Spanjaard Mould Release (Non-Silicone) forms a heat-resistant wet film on the mould and can easily be removed by common solvents if necessary. Spanjaard Mould Release (Non-Silicone) does not contain silicones or PTFE. Applictions Instruction - Shake can vigorously before use. - Spray onto surface from a distance of 20cm. - One application is normally sufficient.

<h3>Spanjaard Mould Release (NON-SILICONE) SPANJ-MOULDR NS-400G SPR</h3>
&nbsp;For use in injection moulding where parts need to be printed after manufacture and silicone mould release agents are therefore not suitable. 
Application 
&nbsp;
Developed for the release of plastic injection moulded parts that require a non-silicone product to enable subsequent printing on the parts. Suitable for the manufacture of poly-carbonate injection mouldings such as telephones, where de-stressing is vital. Facilitates the release from moulds, forms and dies, continuous cure rolls, presses etc. Suitable for all types of plastics and rubbers. Penetrates and protects the mould. 
Spanjaard Mould Release (Non-Silicone) forms a heat-resistant wet film on the mould and can easily be removed by common solvents if necessary. 
Spanjaard Mould Release (Non-Silicone) does not contain silicones or PTFE. 
Applictions Instruction 

- Shake can vigorously before use. 
- Spray onto surface from a distance of 20cm. 
- One application is normally sufficient.

spanjaard mould release (non-silicone) spanj-mouldr ns-400g spr pelepas cetakan (non-silikon) degreasers degreaser pelepasan acuan (bukan silikon) de-gris spanjaard/西班牙人 脱模剂（非硅胶）spanj-mouldr 除油剂 西班牙人

Pelepas Cetakan Spanjaard (NON-SILIKON) SPANJ-MOULDR NS-400G SPR