Spanjaard

防锈涂料和润滑剂

Anti Rust Coating & Lubricant

Pelapis & Pelumas Anti Karat

Lapisan Anti Karat & Pelincir

สารเคลือบป้องกันสนิมและน้ำมันหล่อลื่น

anti-rust-coating-lubricant

化学品

Chemicals

chemicals

Bahan Kimia

Kimia

เคมีภัณฑ์

油漆 & 涂层

Paint & Coating

paint & coating

Cat & Pelapisan

Cat & Salutan

สีและสารเคลือบ

paint-coating

Spanjaard Spatter Release #640 Non-Water Based Non-Silicone SPANJ-SPATTER640 NS-400ML SPR

Spanjaard Spatter Release (Silicone) is an economical, non-silicone aerosol spray for control of weld spatter during welding operations when subsequent painting is required. Only a light single spray coat application is recommended for  #640 is non-water based..

It is a heat resistant silicone film that prevents weld spatter building up in the nozzle of CO2 gas shrouded welding guns. Spatter blocks the flow of gas permitting oxygen from the air to weaken the weld.

Spanjaard Spatter Release #639 and #640 (Non-Silicone) provide a film that prevents adherence around the weld zone allowing any spatter to be brushed away easily. It also prevents weld spatter building-up in the nozzle of CO2 gas shrouded welding guns. Spatter blocks the flow of gas permitting oxygen from the air to weaken the weld.

To prevent this, spray a single short spray into the shroud and over the nozzle of the welding gun. Should any spatter be left in the shroud after continuous welding, it can be very easily removed by simply tapping the gun and the spatter will drop out. Surfaces can be protected by a single light spray pass.

Note: For Spanjaard Spatter Release #639 excessive spray onto the weld surface or drip from the weld wire will result in weld pinholes. Spanjaard Spatter Release #639 and #640 (Non-Silicone) do not interfere with the subsequent paint adhesion qualities and are especially suitable for the automobile manufacturing industry. Silicone Anti-Spatter sprays may cause paint adhesion problems. (Silicone transfers easily by touch causing “fish eyes” upon painting).

<h3 class="md-block-header-three">Spanjaard Spatter Release #640 Non-Water Based Non-Silicone SPANJ-SPATTER640 NS-400ML SPR</h3>Spanjaard Spatter Release (Silicone) is an economical, non-silicone aerosol spray for control of weld spatter during welding operations when subsequent painting is required. Only a light single spray coat application is recommended for #640 is non-water based..It is a heat resistant silicone film that prevents weld spatter building up in the nozzle of CO2 gas shrouded welding guns. Spatter blocks the flow of gas permitting oxygen from the air to weaken the weld.ApplicationsSpanjaard Spatter Release #639 and #640 (Non-Silicone) provide a film that prevents adherence around the weld zone allowing any spatter to be brushed away easily. It also prevents weld spatter building-up in the nozzle of CO2 gas shrouded welding guns. Spatter blocks the flow of gas permitting oxygen from the air to weaken the weld.To prevent this, spray a single short spray into the shroud and over the nozzle of the welding gun. Should any spatter be left in the shroud after continuous welding, it can be very easily removed by simply tapping the gun and the spatter will drop out. Surfaces can be protected by a single light spray pass.Note: For Spanjaard Spatter Release #639 excessive spray onto the weld surface or drip from the weld wire will result in weld pinholes. Spanjaard Spatter Release #639 and #640 (Non-Silicone) do not interfere with the subsequent paint adhesion qualities and are especially suitable for the automobile manufacturing industry. Silicone Anti-Spatter sprays may cause paint adhesion problems. (Silicone transfers easily by touch causing “fish eyes” upon painting).Packing: 400 ml aerosol can

<h3>Spanjaard Spatter Release #640 Non-Water Based Non-Silicone SPANJ-SPATTER640 NS-400ML SPR</h3>
Spanjaard Spatter Release (Silicone) is an economical, non-silicone aerosol spray for control of weld spatter during welding operations when subsequent painting is required. Only a light single spray coat application is recommended for #640 is non-water based..
It is a heat resistant silicone film that prevents weld spatter building up in the nozzle of CO2 gas shrouded welding guns. Spatter blocks the flow of gas permitting oxygen from the air to weaken the weld.
Applications
Spanjaard Spatter Release #639 and #640 (Non-Silicone) provide a film that prevents adherence around the weld zone allowing any spatter to be brushed away easily. It also prevents weld spatter building-up in the nozzle of CO2 gas shrouded welding guns. Spatter blocks the flow of gas permitting oxygen from the air to weaken the weld.
To prevent this, spray a single short spray into the shroud and over the nozzle of the welding gun. Should any spatter be left in the shroud after continuous welding, it can be very easily removed by simply tapping the gun and the spatter will drop out. Surfaces can be protected by a single light spray pass.
Note: For Spanjaard Spatter Release #639 excessive spray onto the weld surface or drip from the weld wire will result in weld pinholes. Spanjaard Spatter Release #639 and #640 (Non-Silicone) do not interfere with the subsequent paint adhesion qualities and are especially suitable for the automobile manufacturing industry. Silicone Anti-Spatter sprays may cause paint adhesion problems. (Silicone transfers easily by touch causing “fish eyes” upon painting).
Packing: 400 ml aerosol can&nbsp;

spanjaard spatter release #640 non-water based non-silicone spanj-spatter640 ns-400ml spr berbahan dasar air anti rust coating lubricant pelapis pelumas karat bukan berasaskan silikon lapisan pelincir spanjaard/西班牙人 非水性非硅胶 防锈涂料和润滑剂 西班牙人

Spanjaard Spatter Release #640 Non-Silicone Berbahan Dasar Air SPANJ-SPATTER640 NS-400ML SPR