WEICON

环氧胶

Epoxy

Epoksi

อีพ็อกซี่

epoxy

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

粘合剂

Sealant

sealant

Bahan Pengedap

ซีลแลนท์

The epoxy resin system WEICON Ceramic HC 220 provides high abrasion resistance and serves as wear protection for heavily used surfaces. It is temperature-resistant up to +220 °C, flowable, ceramic-filled, resistant to chemicals and has a high adhesive strength. Ceramic HC 220 can be easily processed with a paint brush and applied to large surfaces. The epoxy resin systems is non-corrosive, anti-magnetic and cures practically without shrinkage. The product can be used in mechanical and plant engineering, in equipment engineering, and in many other areas of industry where high temperature loads are part of daily work.

For processing, we recommend an ambient temperature of 20°C (68°C) at less than 85% relative humidity. The highest adhesive strength is achieved when the parts to be processed are heated to >35°C (>95°F) before application. For a thin pre-coat, work WEICON Ceramic HC 220 intensively into the surface in crosswise layers using a paint brush to achieve maximum adhesion. By means of this technique, the epoxy resin penetrates well into all cracks and roughness depths. Afterwards, a second application with a paint brush or foam roller can be carried out straight away, until the desired layer thickness is reached. A layer of approx. 0,25 to 0,50 mm can be achieved per work step. Make sure that the epoxy resin is applied evenly and without air bubbles. Further coats can be applied in each case after approx. 4 hours (layer sequence time).   

<h3 class="md-block-header-three"><strong class="md-inline-bold">Weicon Ceramic Hc 220 Epoxy Resin 0.5 Kg</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Description</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Wear protection | surface coating | high temperature resistance | drinking water approval according to BS 6920 | Flowable | ceramic-filled | wear protection | surface coating | temperature-resistant up to +220 °</strong></p><p class="md-block-unstyled">The epoxy resin system WEICON Ceramic HC 220 provides high abrasion resistance and serves as wear protection for heavily used surfaces. It is temperature-resistant up to +220 °C, flowable, ceramic-filled, resistant to chemicals and has a high adhesive strength. Ceramic HC 220 can be easily processed with a paint brush and applied to large surfaces. The epoxy resin systems is non-corrosive, anti-magnetic and cures practically without shrinkage. The product can be used in mechanical and plant engineering, in equipment engineering, and in many other areas of industry where high temperature loads are part of daily work.</p><h3 class="md-block-header-three"><strong class="md-inline-bold">Application</strong></h3><p class="md-block-unstyled">For processing, we recommend an ambient temperature of 20°C (68°C) at less than 85% relative humidity. The highest adhesive strength is achieved when the parts to be processed are heated to &gt;35°C (&gt;95°F) before application. For a thin pre-coat, work WEICON Ceramic HC 220 intensively into the surface in crosswise layers using a paint brush to achieve maximum adhesion. By means of this technique, the epoxy resin penetrates well into all cracks and roughness depths. Afterwards, a second application with a paint brush or foam roller can be carried out straight away, until the desired layer thickness is reached. A layer of approx. 0,25 to 0,50 mm can be achieved per work step. Make sure that the epoxy resin is applied evenly and without air bubbles. Further coats can be applied in each case after approx. 4 hours (layer sequence time).   </p>

<h3><strong>Weicon Ceramic Hc 220 Epoxy Resin 0.5 Kg</strong></h3>
<h3><strong>Description</strong></h3>
<p><strong>Wear protection | surface coating | high temperature resistance | drinking water approval according to BS 6920 | Flowable | ceramic-filled | wear protection | surface coating | temperature-resistant up to +220 °</strong></p>
<p>The epoxy resin system WEICON Ceramic HC 220 provides high abrasion resistance and serves as wear protection for heavily used surfaces. It is temperature-resistant up to +220 °C, flowable, ceramic-filled, resistant to chemicals and has a high adhesive strength. Ceramic HC 220 can be easily processed with a paint brush and applied to large surfaces. The epoxy resin systems is non-corrosive, anti-magnetic and cures practically without shrinkage. The product can be used in mechanical and plant engineering, in equipment engineering, and in many other areas of industry where high temperature loads are part of daily work.</p>
<h3><strong>Application</strong></h3>
<p>For processing, we recommend an ambient temperature of 20°C (68°C) at less than 85% relative humidity. The highest adhesive strength is achieved when the parts to be processed are heated to &gt;35°C (&gt;95°F) before application. For a thin pre-coat, work WEICON Ceramic HC 220 intensively into the surface in crosswise layers using a paint brush to achieve maximum adhesion. By means of this technique, the epoxy resin penetrates well into all cracks and roughness depths. Afterwards, a second application with a paint brush or foam roller can be carried out straight away, until the desired layer thickness is reached. A layer of approx. 0,25 to 0,50 mm can be achieved per work step. Make sure that the epoxy resin is applied evenly and without air bubbles. Further coats can be applied in each case after approx. 4 hours (layer sequence time).&nbsp;&nbsp;&nbsp;</p>


Datasheet Weicon Ceramic Hc 220 Epoxy Resin 0.5 Kg

Weicon 10120005 Ceramic Hc 220 Epoxy Resin 0.5 Kg

weicon 10120005 ceramic hc 220 epoxy resin 0.5 kg keramik epoksi seramik weicon/威康 陶瓷 环氧树脂 公斤 环氧胶 威康

weicon-10120005-ceramic-hc-220-epoxy-resin-0-5-kg

Weicon Keramik Hc 220 Epoxy Resin 0.5 Kg

Keterangan

Aplikasi

Merek:	WEICON
Model:	10120005