WEICON

环氧胶

Epoxy

Epoksi

อีพ็อกซี่

epoxy

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

粘合剂

Sealant

sealant

Bahan Pengedap

ซีลแลนท์

WEICON WR2 is a pasty   wear protection and is particularly suitable for areas where the processing   of casting compounds is not possible such as the repair of conveyors, guide   rails and sliding ways. The epoxy resin system is also used to prevent wear   on metal surfaces that are subject to high abrasion and erosion. It can serve   as a wear-resistant underlayer before the final coating with WEICON Ceramic   BL WR2 can be used in mechanical and plant engineering, in equipment   engineering, and in many other areas of industry.    

For processing, we   recommend an ambient temperature of 20°C (68°C) at less than 85% relative   humidity. The highest adhesive strength is achieved when the parts to be   processed are heated to >35°C (>95°F) before application. For a thin   pre-coat, work WEICON WR2 intensively into the surface in crosswise layers   using the Contour Spatula Flexy or a paint brush to achieve maximum adhesion.   By means of this technique, the epoxy resin penetrates well into all cracks   and roughness depths. Afterwards, further applications can be carried out   straight away, until the desired layer thickness is reached. Make sure that   the epoxy resin is applied evenly and without air bubbles. To fill large gaps   or holes, fibreglass, expanded metal or other mechanical fixing materials   should be used. Finally, the surface can be smoothed easily with the help of   a PE film and a rubber roller.    

<h3 class="md-block-header-three"><strong class="md-inline-bold">WEICON WR2 Epoxy   Resin 0.2 kg    </strong></h3><p class="md-block-unstyled">WEICON WR2 is a pasty   wear protection and is particularly suitable for areas where the processing   of casting compounds is not possible such as the repair of conveyors, guide   rails and sliding ways. The epoxy resin system is also used to prevent wear   on metal surfaces that are subject to high abrasion and erosion. It can serve   as a wear-resistant underlayer before the final coating with WEICON Ceramic   BL WR2 can be used in mechanical and plant engineering, in equipment   engineering, and in many other areas of industry.    </p><h3 class="md-block-header-three"><strong class="md-inline-bold">Application</strong></h3><p class="md-block-unstyled">For processing, we   recommend an ambient temperature of 20°C (68°C) at less than 85% relative   humidity. The highest adhesive strength is achieved when the parts to be   processed are heated to &gt;35°C (&gt;95°F) before application. For a thin   pre-coat, work WEICON WR2 intensively into the surface in crosswise layers   using the Contour Spatula Flexy or a paint brush to achieve maximum adhesion.   By means of this technique, the epoxy resin penetrates well into all cracks   and roughness depths. Afterwards, further applications can be carried out   straight away, until the desired layer thickness is reached. Make sure that   the epoxy resin is applied evenly and without air bubbles. To fill large gaps   or holes, fibreglass, expanded metal or other mechanical fixing materials   should be used. Finally, the surface can be smoothed easily with the help of   a PE film and a rubber roller.    </p>

<h3><strong>WEICON WR2 Epoxy   Resin 0.2 kg    </strong></h3>
<p>WEICON WR2 is a pasty   wear protection and is particularly suitable for areas where the processing   of casting compounds is not possible such as the repair of conveyors, guide   rails and sliding ways. The epoxy resin system is also used to prevent wear   on metal surfaces that are subject to high abrasion and erosion. It can serve   as a wear-resistant underlayer before the final coating with WEICON Ceramic   BL WR2 can be used in mechanical and plant engineering, in equipment   engineering, and in many other areas of industry.&nbsp;&nbsp;&nbsp;&nbsp;</p>
<h3><strong>Application</strong></h3>
<p>For processing, we   recommend an ambient temperature of 20°C (68°C) at less than 85% relative   humidity. The highest adhesive strength is achieved when the parts to be   processed are heated to &gt;35°C (&gt;95°F) before application. For a thin   pre-coat, work WEICON WR2 intensively into the surface in crosswise layers   using the Contour Spatula Flexy or a paint brush to achieve maximum adhesion.   By means of this technique, the epoxy resin penetrates well into all cracks   and roughness depths. Afterwards, further applications can be carried out   straight away, until the desired layer thickness is reached. Make sure that   the epoxy resin is applied evenly and without air bubbles. To fill large gaps   or holes, fibreglass, expanded metal or other mechanical fixing materials   should be used. Finally, the surface can be smoothed easily with the help of   a PE film and a rubber roller.&nbsp;&nbsp;&nbsp;&nbsp;</p>


Weicon 10350002 WR2 Epoxy Resin 0.2 Kg

weicon 10350002 wr2 epoxy resin 0.2 kg epoksi 0,2 ​​kg weicon/威康 环氧树脂 公斤 环氧胶 威康

weicon-10350002-wr2-epoxy-resin-0-2-kg

Resin Epoksi WEICON WR2 0,2 kg

Aplikasi

Merek:	WEICON
Model:	10350002

Resin Epoksi WEICON WR2 0,2 ​​kg

Aplikasi

Resin Epoksi WEICON WR2 0,2 kg