WEICON

密封胶

Sealants

Sealant

Pengedap

ซีลแลนท์

sealants

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

粘合剂

sealant

Bahan Pengedap

The epoxy resin   system WEICON GL-S provides high abrasion resistance and serves as wear   protection for heavily used surfaces. It is flowable, spreadable (can be   applied with a paint brush), has a high initial strength, is mineral-filled,   and resistant to chemicals. WEICON GL-S is also well-suited for creating a   system structure in combination with WEICON Ceramic BL. Due to its long   recoat time of five hours, GL-S is especially suitable for applications at   higher ambient temperatures or for larger surfaces. The different colours of   Ceramic BL (blue) and GL-S (dark green) make it easy to determine the degree   of wear during visual inspections. It is particularly suitable for lining   heavily stressed pump casings, as wear protection for slide bearings, chutes,   funnels and pipes, and for the repair of castings, valves and fan blades. The   product can be used in mechanical and plant engineering, in equipment   engineering, and in many other areas of industry.    

For processing, we   recommend an ambient temperature of 20°C (68°C) at less than 85% relative   humidity. The highest adhesive strength is achieved when the parts to be   processed are heated to >35°C (>95°F) before application. For a thin   pre-coat, work WEICON GL-S intensively into the surface in crosswise layers   using a paint brush to achieve maximum adhesion. By means of this technique,   the epoxy resin penetrates well into all cracks and roughness depths.   Afterwards, a second application with a paint brush or foam roller can be   carried out straight away, until the desired layer thickness is reached. A   layer of approx. 0,25 to 0,50 mm can be achieved per work step. Make sure   that the epoxy resin is applied evenly and without air bubbles. Further coats   can be applied in each case after approx. 5 hours (layer sequence time).    

<h3 class="md-block-header-three">Weicon GL-S 0,5 Kg </h3>The epoxy resin system WEICON GL-S provides high abrasion resistance and serves as wear protection for heavily used surfaces. It is flowable, spreadable (can be applied with a paint brush), has a high initial strength, is mineral-filled, and resistant to chemicals. WEICON GL-S is also well-suited for creating a system structure in combination with WEICON Ceramic BL. Due to its long recoat time of five hours, GL-S is especially suitable for applications at higher ambient temperatures or for larger surfaces. The different colours of Ceramic BL (blue) and GL-S (dark green) make it easy to determine the degree of wear during visual inspections. It is particularly suitable for lining heavily stressed pump casings, as wear protection for slide bearings, chutes, funnels and pipes, and for the repair of castings, valves and fan blades. The product can be used in mechanical and plant engineering, in equipment engineering, and in many other areas of industry. ApplicationFor processing, we recommend an ambient temperature of 20°C (68°C) at less than 85% relative humidity. The highest adhesive strength is achieved when the parts to be processed are heated to &gt;35°C (&gt;95°F) before application. For a thin pre-coat, work WEICON GL-S intensively into the surface in crosswise layers using a paint brush to achieve maximum adhesion. By means of this technique, the epoxy resin penetrates well into all cracks and roughness depths. Afterwards, a second application with a paint brush or foam roller can be carried out straight away, until the desired layer thickness is reached. A layer of approx. 0,25 to 0,50 mm can be achieved per work step. Make sure that the epoxy resin is applied evenly and without air bubbles. Further coats can be applied in each case after approx. 5 hours (layer sequence time).

<h3>Weicon GL-S 0,5 Kg </h3>
The epoxy resin system WEICON GL-S provides high abrasion resistance and serves as wear protection for heavily used surfaces. It is flowable, spreadable (can be applied with a paint brush), has a high initial strength, is mineral-filled, and resistant to chemicals. WEICON GL-S is also well-suited for creating a system structure in combination with WEICON Ceramic BL. Due to its long recoat time of five hours, GL-S is especially suitable for applications at higher ambient temperatures or for larger surfaces. The different colours of Ceramic BL (blue) and GL-S (dark green) make it easy to determine the degree of wear during visual inspections. It is particularly suitable for lining heavily stressed pump casings, as wear protection for slide bearings, chutes, funnels and pipes, and for the repair of castings, valves and fan blades. The product can be used in mechanical and plant engineering, in equipment engineering, and in many other areas of industry.&nbsp;&nbsp;&nbsp;&nbsp;
Application
For processing, we recommend an ambient temperature of 20°C (68°C) at less than 85% relative humidity. The highest adhesive strength is achieved when the parts to be processed are heated to &gt;35°C (&gt;95°F) before application. For a thin pre-coat, work WEICON GL-S intensively into the surface in crosswise layers using a paint brush to achieve maximum adhesion. By means of this technique, the epoxy resin penetrates well into all cracks and roughness depths. Afterwards, a second application with a paint brush or foam roller can be carried out straight away, until the desired layer thickness is reached. A layer of approx. 0,25 to 0,50 mm can be achieved per work step. Make sure that the epoxy resin is applied evenly and without air bubbles. Further coats can be applied in each case after approx. 5 hours (layer sequence time).&nbsp;&nbsp;&nbsp;&nbsp;

Datasheet Weicon GL-S 0,5 Kg

Weicon 10705005 GL-S 0,5 Kg

weicon 10705005 gl-s 0,5 kg sealants sealant 0.5 pengedap weicon/威康 公斤 密封胶 威康

weicon-10705005-gl-s-0-5-kg

Merek:	WEICON
Model:	10705005