Wurth

钻头和钻头套装

Drill Bits & Drill Bit Sets

Mata Bor & Set Mata Bor

Mata Gerudi & Set Mata Gerudi

ดอกสว่านและชุดดอกสว่าน

drill-bits-drill-bit-sets

工具

Tools

tools

Peralatan

เครื่องมือ

工具组套 & 零件

Toolkits & Tool Accessories

toolkits & tool accessories

Peralatan & Aksesoris

Kit Alatan & Aksesori

ชุดเครื่องมือและอุปกรณ์เครื่องมือ

toolkits-tool-accessories

Wurth Hammer Drill Bit Plus QUADRO-L Vario D16,0-L210-WL160MM DRL-HAM-PLUS-Q-LV-D16,0-L210-WL160MM

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

Significantly improved compatibility with reinforcements

The symmetrical 4 x 90° cutting edge geometry (up to Ø 10 mm with solid carbide head) prevents the drill bit from hooking in or running off centre when striking e.g. reinforcements.

The advanced tip geometry and asymmetrically placed elevations on the cutting edges ensure improved traction.

Perfect drilling properties over the entire service life

Head geometry that is tailored to the drill bit diameter

5–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability.

18–32 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces.

Considerably improved drilling speed and dust removal while at the same time offering increased protection against breakage

Vario spiral conveyor with back that narrows at the front and widens at the rear, as well as sharper angle at the spiral end ensures reduced friction, high stability and maximum transmission of impact energy.

Drill bit with four cutting edges and four-spiral geometry to ensure that the bit is guided perfectly into the drilled hole.

The special self-centring tip enables high-precision spot drilling. 


Drilling speed (point system) 2 of 4 points

Smoothness of running (points system) 4 of 4 points

Reinforcement strength (points system) 4 of 4 points

Service life (points system) 4 of 4 points

Tool holding device Suitable for SDS-plus

<h3 class="md-block-header-three">Wurth Hammer Drill Bit Plus QUADRO-L Vario D16,0-L210-WL160MM DRL-HAM-PLUS-Q-LV-D16,0-L210-WL160MM</h3>The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcementSignificantly improved compatibility with reinforcementsThe symmetrical 4 x 90° cutting edge geometry (up to Ø 10 mm with solid carbide head) prevents the drill bit from hooking in or running off centre when striking e.g. reinforcements.Noticeably quicker drillingThe advanced tip geometry and asymmetrically placed elevations on the cutting edges ensure improved traction.Perfect drilling properties over the entire service life<ul class="md-block-unordered-list-item"><li>Head geometry that is tailored to the drill bit diameter</li><li>5–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability.</li><li>18–32 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces.</li></ul>Considerably improved drilling speed and dust removal while at the same time offering increased protection against breakageVario spiral conveyor with back that narrows at the front and widens at the rear, as well as sharper angle at the spiral end ensures reduced friction, high stability and maximum transmission of impact energy.Optimum guidance in drilled holeDrill bit with four cutting edges and four-spiral geometry to ensure that the bit is guided perfectly into the drilled hole.Precise spot drillingThe special self-centring tip enables high-precision spot drilling. <h3 class="md-block-header-three">Technical Information</h3><ul class="md-block-unordered-list-item"><li>Drilling speed (point system) 2 of 4 points</li><li>Smoothness of running (points system) 4 of 4 points</li><li>Accuracy (point system) 4 of 4 points</li><li>Reinforcement strength (points system) 4 of 4 points</li><li>Service life (points system) 4 of 4 points</li><li>Diameter (Ø) 16 mm</li><li>Length 210 mm</li><li>Working length 160 mm</li><li>Number of cutting edges 4 PCS</li><li>Tool holding device Suitable for SDS-plus</li></ul>

<h3>Wurth Hammer Drill Bit Plus QUADRO-L Vario D16,0-L210-WL160MM DRL-HAM-PLUS-Q-LV-D16,0-L210-WL160MM</h3>
The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement
Significantly improved compatibility with reinforcements
The symmetrical 4 x 90° cutting edge geometry (up to Ø 10 mm with solid carbide head) prevents the drill bit from hooking in or running off centre when striking e.g. reinforcements.
Noticeably quicker drilling
The advanced tip geometry and asymmetrically placed elevations on the cutting edges ensure improved traction.
Perfect drilling properties over the entire service life
<ul>
<li>Head geometry that is tailored to the drill bit diameter</li>
<li>5–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability.</li>
<li>18–32 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces.</li>
</ul>
Considerably improved drilling speed and dust removal while at the same time offering increased protection against breakage
Vario spiral conveyor with back that narrows at the front and widens at the rear, as well as sharper angle at the spiral end ensures reduced friction, high stability and maximum transmission of impact energy.
Optimum guidance in drilled hole
Drill bit with four cutting edges and four-spiral geometry to ensure that the bit is guided perfectly into the drilled hole.
Precise spot drilling
The special self-centring tip enables high-precision spot drilling. 

<h3>Technical Information</h3>
<ul>
<li>Drilling speed (point system) 2 of 4 points</li>
<li>Smoothness of running (points system) 4 of 4 points</li>
<li>Accuracy (point system) 4 of 4 points</li>
<li>Reinforcement strength (points system) 4 of 4 points</li>
<li>Service life (points system) 4 of 4 points</li>
<li>Diameter (Ø) 16 mm</li>
<li>Length 210 mm</li>
<li>Working length 160 mm</li>
<li>Number of cutting edges 4 PCS</li>
<li>Tool holding device Suitable for SDS-plus</li>
</ul>

Mata Bor Palu Wurth Plus QUADRO-L Vario D16,0-L210-WL160MM DRL-HAM-PLUS-Q-LV-D16,0-L210-WL160MM

Informasi Teknis