FLUKE

Test & Measurement

test-measurement

Calibrators

calibrators

Multimeters

multimeters

Other Measuring Tools

other-measuring-tools

 The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.  

The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.

*Requires Fluke IR3000FC module (not included). 

The 789 provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot every part of the loop.

Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.

This ProcessMeter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC voltage accuracy and 0.05% DC current accuracy.

<h3 class="md-block-header-three">Fluke 789 Process Meter</h3> The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor. The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.*Requires Fluke IR3000FC module (not included). Do a lot more while carrying a lot lessThe 789 provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot every part of the loop.Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.AccuracyThis ProcessMeter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC voltage accuracy and 0.05% DC current accuracy.

<h3>Fluke 789 Process Meter</h3>
&nbsp;The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.&nbsp;&nbsp;
The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.
*Requires Fluke IR3000FC module (not included).&nbsp;
Do a lot more while carrying a lot less
The 789 provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot every part of the loop.
Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.
Accuracy
This ProcessMeter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC voltage accuracy and 0.05% DC current accuracy.

Stefy

Fluke 789 Process Meter

fluke 789 process meter pengukur proses calibrators fluke/福禄克 过程仪表 福禄克

fluke-789-process-meter

Double the troubleshooting power so you can do more, while carrying a lot less The Fluke 789 ProcessMeter™ double troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Whether you only need to source and simulate mA, or need a 24 V loop power supply, Fluke has a ProcessMeter™ test tool designed specifically to meet your needs. 

20 mA dc current source/measure/simulate 

DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards 

Fluke Connect® compatibility for wireless data logging (with IR3000FC module)* 

Precision 1000 V, 440 mA true-rms digital multimeter 

Manual step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp 

Externally accessible battery for easy battery changes 

HART mode setting with loop power (adds 250 ohm resistor) 

<h3 class="md-block-header-three">Fluke Processmeter 789 </h3>Double the troubleshooting power so you can do more, while carrying a lot less The Fluke 789 ProcessMeter™ double troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Whether you only need to source and simulate mA, or need a 24 V loop power supply, Fluke has a ProcessMeter™ test tool designed specifically to meet your needs. 789 Key Features <ul class="md-block-unordered-list-item"><li>20 mA dc current source/measure/simulate </li><li>Simultaneous mA and % of scale readout </li><li>DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards </li><li>Fluke Connect® compatibility for wireless data logging (with IR3000FC module)* </li><li>Precision 1000 V, 440 mA true-rms digital multimeter </li><li>Frequency measurement to 20 kHz </li><li>Min/Max/Average/Hold/Relative modes </li><li>Diode test and continuity beeper </li><li>Manual step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp </li><li>Externally accessible battery for easy battery changes </li></ul> 789 additional features <ul class="md-block-unordered-list-item"><li>24 V Loop power supply </li><li>HART mode setting with loop power (adds 250 ohm resistor) </li></ul>Includes :<ul class="md-block-unordered-list-item"><li>Infrared camera</li><li>USB cable</li><li>Soft transport bag</li><li>Adjustable lanyard</li></ul>

<h3>Fluke Processmeter 789&nbsp;</h3>
Double the troubleshooting power so you can do more, while carrying a lot less The Fluke 789 ProcessMeter™ double troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Whether you only need to source and simulate mA, or need a 24 V loop power supply, Fluke has a ProcessMeter™ test tool designed specifically to meet your needs.&nbsp;
789 Key Features 
<ul>
<li>20 mA dc current source/measure/simulate&nbsp;</li>
<li>Simultaneous mA and % of scale readout&nbsp;</li>
<li>DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards&nbsp;</li>
<li>Fluke Connect® compatibility for wireless data logging (with IR3000FC module)*&nbsp;</li>
<li>Precision 1000 V, 440 mA true-rms digital multimeter&nbsp;</li>
<li>Frequency measurement to 20 kHz&nbsp;</li>
<li>Min/Max/Average/Hold/Relative modes&nbsp;</li>
<li>Diode test and continuity beeper&nbsp;</li>
<li>Manual step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp&nbsp;</li>
<li>Externally accessible battery for easy battery changes&nbsp;</li>
</ul>
 789 additional features 
<ul>
<li>24 V Loop power supply&nbsp;</li>
<li>HART mode setting with loop power (adds 250 ohm resistor)&nbsp;</li>
</ul>
Includes :
<ul>
<li>Infrared camera</li>
<li>USB cable</li>
<li>Soft transport bag</li>
<li>Adjustable lanyard</li>
</ul>

PCE Instruments

MEGGER

Onset

TRIPLETT

EXTECH INSTRUMENTS

ACISION

KYORITSU

Center

Tormin

Electrical Power Testing

Temperature Data Logger

Humidity & Temperature

Industrial Thermometer

Sound & Vibration Meters

Air Quality Meters

Meteorological Instrumentation & Equipment

Flow & PH Meters

Bryan 

buyerIntroduction

Fluke Processmeter 789

fluke processmeter 789 multimeters multimeter fluke/福禄克 过程仪表 万用表 福禄克

fluke-processmeter-789

Fluke 789 Processmeter Test Tool 0-1A AC/DC 0-1000VAC TRMS/DC 

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.

*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.

Compact digital multimeter and mA loop calibrator solution

Full-featured mA loop calibrator with built-in 24v Loop Power

Quickly and easily troubleshoot every part of a control loop

<h3 class="md-block-header-three">Fluke 789 Processmeter Test Tool 0-1A AC/DC 0-1000VAC TRMS/DC </h3>The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.<ul class="md-block-unordered-list-item"><li>Compact digital multimeter and mA loop calibrator solution</li><li>Full-featured mA loop calibrator with built-in 24v Loop Power</li><li>Quickly and easily troubleshoot every part of a control loop</li><li>Large, bright dual-measurement display</li></ul>

<h3>Fluke 789 Processmeter Test Tool 0-1A AC/DC 0-1000VAC TRMS/DC&nbsp;</h3>
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.
The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.
*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
<ul>
<li>Compact digital multimeter and mA loop calibrator solution</li>
<li>Full-featured mA loop calibrator with built-in 24v Loop Power</li>
<li>Quickly and easily troubleshoot every part of a control loop</li>
<li>Large, bright dual-measurement display</li>
</ul>

Andrew Lim

Sanwa

UNI-T

GOOT

TES Electrical

HIOKI

Iroda

Extech

Clamp Meters

Soldering & Brazing Equipment

Voltmeters

Light Meters & Imaging

Soldering Irons

Fluke 789 Processmeter Test Tool 0-1A AC/DC 0-1000VAC TRMS/DC

fluke 789 processmeter test tool 0-1a ac/dc 0-1000vac trms/dc alat uji pengukur proses measuring tools ukur lainnya ujian lain fluke/福禄克 过程仪表测试工具 其他量具用品 福禄克

fluke-789-processmeter-test-tool-0-1a-ac-dc-0-1000vac-trms-dc

The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. 

With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.

The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.

Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. 

Measure/Source/Simulate loop currents while powering the loop

Manual and automatic ramp up – ramp down functions

Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V

Range and Resolution: 1.000 A (0.440 A continuous)

Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M

Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz

Range and Resolution: 2.000 V (shows diode voltage drop)

DC Current Output (Internal Battery Operation):


Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA

Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA

DC Current Simulate (External 15 V to 48 V Loop Supply):


Automatic: Slow Ramp, Fast Ramp, 25% step

Temperature Range: 18 °C to 28 °C, for one year after calibration

Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS

Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures < 18 °C or > 28 °C)

Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V

Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)

<h3 class="md-block-header-three"> Fluke 787B Processmeter</h3>The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.Expand your troubleshooting capabilitiesThe Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. <ul class="md-block-unordered-list-item"><li>Compact digital multimeter and mA loop calibrator solution</li><li>Measure/Source/Simulate loop currents while powering the loop</li><li>Manual and automatic ramp up – ramp down functions</li><li>Easy-to-read backlit display </li></ul><h3 class="md-block-header-three">Measurement Function</h3><ul class="md-block-unordered-list-item"><li>V DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.1% + 1</li></ul><li>V AC (True-RMS): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.7% + 2</li></ul><li>mA DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 30.000 mA</li><li>Best Accuracy: 0.05% + 2</li></ul><li>A DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 0.2% + 2</li></ul><li>A AC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 1% + 2</li></ul><li>Resistance: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li><li>Best Accuracy: 0.2% + 1</li></ul><li>Frequency (0.5 Hz to 20 kHz): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li><li>Best Accuracy: 0.005% + 1</li></ul><li>Diode Test: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 2.000 V (shows diode voltage drop)</li><li>Best Accuracy: 2% + 1</li></ul><li>Continuity: </li><ul class="md-block-unordered-list-item"><li>Beeps for resistance &lt; approx. 100 ohms</li></ul></ul><h3 class="md-block-header-three">Output Function</h3><ul class="md-block-unordered-list-item"><li>DC Current Output (Internal Battery Operation): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li>DC Current Simulate (External 15 V to 48 V Loop Supply): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 1000 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li>Current Adjustment Modes: </li><ul class="md-block-unordered-list-item"><li>Manual: Coarse, Fine, 25% and 100% step</li><li>Automatic: Slow Ramp, Fast Ramp, 25% step</li></ul></ul><h3 class="md-block-header-three">Temperature Range</h3><ul class="md-block-unordered-list-item"><li>Temperature Range: 18 °C to 28 °C, for one year after calibration</li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS</li><li>Storage Temperature: -40 °C to 60 °C</li><li>Operating Temperature: -20 °C to 55 °C</li><li>Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li><li>Relative Humidity: </li><ul class="md-block-unordered-list-item"><li>95% up to 30 °C</li><li>75% up to 40 °C</li><li>45% up to 50 °C</li><li>35% up to 55 °C</li></ul><li>Vibration: Random, 2 g, 5-500 Hz</li><li>Shock: 1 meter drop test</li><li>Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li><li>Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li><li>Weight: 600 g (1.3 lbs)</li><li>Battery: Four AA alkaline batteries</li><li>Battery Life: </li><ul class="md-block-unordered-list-item"><li>140 hours typical (measurement)</li><li>10 hours typical (sourcing 12 mA)</li></ul><li>Warranty: Three years</li></ul>

<h3> Fluke 787B Processmeter</h3>
The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications.&nbsp;
With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.
*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
Expand your troubleshooting capabilities
The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.
Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes.&nbsp;
<ul>
<li>Compact digital multimeter and mA loop calibrator solution</li>
<li>Measure/Source/Simulate loop currents while powering the loop</li>
<li>Manual and automatic ramp up – ramp down functions</li>
<li>Easy-to-read backlit display&nbsp;</li>
</ul>
<h3>Measurement Function</h3>
<ul>
<li>V DC: 
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.1% + 1</li>
</ul>
<li>V AC (True-RMS): 
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.7% + 2</li>
</ul>
<li>mA DC: 
</li>
<ul>
<li>Range and Resolution: 30.000 mA</li>
<li>Best Accuracy: 0.05% + 2</li>
</ul>
<li>A DC: 
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 0.2% + 2</li>
</ul>
<li>A AC: 
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 1% + 2</li>
</ul>
<li>Resistance: 
</li>
<ul>
<li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li>
<li>Best Accuracy: 0.2% + 1</li>
</ul>
<li>Frequency (0.5 Hz to 20 kHz): 
</li>
<ul>
<li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li>
<li>Best Accuracy: 0.005% + 1</li>
</ul>
<li>Diode Test: 
</li>
<ul>
<li>Range and Resolution: 2.000 V (shows diode voltage drop)</li>
<li>Best Accuracy: 2% + 1</li>
</ul>
<li>Continuity: 
</li>
<ul>
<li>Beeps for resistance &lt; approx. 100 ohms</li>
</ul>
</ul>
<h3>Output Function</h3>
<ul>
<li>DC Current Output (Internal Battery Operation): 
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li>DC Current Simulate (External 15 V to 48 V Loop Supply): 
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 1000 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li>Current Adjustment Modes: 
</li>
<ul>
<li>Manual: Coarse, Fine, 25% and 100% step</li>
<li>Automatic: Slow Ramp, Fast Ramp, 25% step</li>
</ul>
</ul>
<h3>Temperature Range</h3>
<ul>
<li>Temperature Range: 18 °C to 28 °C, for one year after calibration</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS</li>
<li>Storage Temperature: -40 °C to 60 °C</li>
<li>Operating Temperature: -20 °C to 55 °C</li>
<li>Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li>
<li>Relative Humidity: 
</li>
<ul>
<li>95% up to 30 °C</li>
<li>75% up to 40 °C</li>
<li>45% up to 50 °C</li>
<li>35% up to 55 °C</li>
</ul>
<li>Vibration: Random, 2 g, 5-500 Hz</li>
<li>Shock: 1 meter drop test</li>
<li>Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li>
<li>Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li>
<li>Weight: 600 g (1.3 lbs)</li>
<li>Battery: Four AA alkaline batteries</li>
<li>Battery Life: 
</li>
<ul>
<li>140 hours typical (measurement)</li>
<li>10 hours typical (sourcing 12 mA)</li>
</ul>
<li>Warranty: Three years</li>
</ul>

Fluke 787B Processmeter

fluke 787b processmeter pengukur proses calibrators fluke/福禄克 过程仪表 福禄克

fluke-787b-processmeter

SCHNEIDER ELECTRIC

Allen-Bradley

Kennedy

Panduit

Exoweld

Festo

Weidmuller

Sherwood

Circuit Breaker

Monitoring Relays

Drill Bits & Drill Bit Sets

Push Button Switches

Power Supply

Power Relay

Contactors

Pilot Lights

KVC ETH

Fluke FLUKE-789 Processmeter Test Tool 0-1A AC/DC 0-1000VAC TRMS/DC

fluke fluke-789 processmeter test tool 0-1a ac/dc 0-1000vac trms/dc alat uji measuring tools ukur lainnya meter proses pengukur lain 福禄克 过程仪表测试工具 其他量具用品

fluke-fluke-789-processmeter-test-tool-0-1a-ac-dc-0-1000vac-trms-dc

Fluke 789 Process Meter Users Manual

Fluke 789 Current Loop Calibrator

Guide - 789/787B

Selection Guide - Fluke Process Tools Accessories

Fluke 789 Multi Function Calibrator

fluke 789 multi function calibrator kalibrator multifungsi calibrators 多功能校准器 福禄克

fluke-789-multi-function-calibrator

Double the troubleshooting power so you can do more, while carrying a lot less The Fluke 787B double troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Whether you only need to source and simulate mA, or need a 24 V loop power supply, Fluke has a ProcessMeter™ test tool designed specifically to meet your needs. 

Min/Max/Average/Hold/Relative modes • Diode test and continuity beeper 

<h3 class="md-block-header-three">Fluke Processmeter - 787B </h3>Double the troubleshooting power so you can do more, while carrying a lot less The Fluke 787B double troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Whether you only need to source and simulate mA, or need a 24 V loop power supply, Fluke has a ProcessMeter™ test tool designed specifically to meet your needs. 787B Key Features<ul class="md-block-unordered-list-item"><li>20 mA dc current source/measure/simulate </li><li>Simultaneous mA and % of scale readout</li><li>DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards </li><li>Fluke Connect® compatibility for wireless data logging (with IR3000FC module)* </li><li>Precision 1000 V, 440 mA true-rms digital multimeter </li><li>Frequency measurement to 20 kHz </li><li>Min/Max/Average/Hold/Relative modes • Diode test and continuity beeper </li><li>Manual step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp </li><li>Externally accessible battery for easy battery changes </li></ul>Includes :<ul class="md-block-unordered-list-item"><li>Fluke 787B Process Meter</li><li>(1 pair) TL71 Premium test leads</li><li>(1 set) AC72 Alligator clips</li><li>(4)AA alkaline batteries (installed)</li><li>Quick reference guide</li><li>3-year warranty</li></ul>

<h3>Fluke Processmeter - 787B &nbsp;</h3>
Double the troubleshooting power so you can do more, while carrying a lot less The Fluke 787B double troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Whether you only need to source and simulate mA, or need a 24 V loop power supply, Fluke has a ProcessMeter™ test tool designed specifically to meet your needs.&nbsp;
787B Key Features
<ul>
<li>20 mA dc current source/measure/simulate&nbsp;</li>
<li>Simultaneous mA and % of scale readout</li>
<li>DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards&nbsp;</li>
<li>Fluke Connect® compatibility for wireless data logging (with IR3000FC module)*&nbsp;</li>
<li>Precision 1000 V, 440 mA true-rms digital multimeter&nbsp;</li>
<li>Frequency measurement to 20 kHz&nbsp;</li>
<li>Min/Max/Average/Hold/Relative modes • Diode test and continuity beeper&nbsp;</li>
<li>Manual step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp&nbsp;</li>
<li>Externally accessible battery for easy battery changes&nbsp;</li>
</ul>
Includes :
<ul>
<li>Fluke 787B Process Meter</li>
<li>(1 pair) TL71 Premium test leads</li>
<li>(1 set) AC72 Alligator clips</li>
<li>(4)AA alkaline batteries (installed)</li>
<li>Quick reference guide</li>
<li>3-year warranty</li>
</ul>