ELORA

Facom

Nietz

Proto

RFS Hydraulics

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

Machinery Lubricants

machinery-lubricants

Grease

grease

Spanners & Sockets

spanners-sockets

Impact Sockets

impact-sockets

Open End Spanners

open-end-spanners

Test & Measurement

test-measurement

Other Measuring Tools

other-measuring-tools

Plumbing & Sanitary

plumbing-sanitary

Pipe Elbow

pipe-elbow

Other Hand Tools

other-hand-tools

Pullers

pullers

Elora 174-80/2 Battery Terminal Puller Span Width 10-90 mm

Description:- For pulling off battery terminals, ball bearings, gear-wheels, etc.
2 arms
12 mm wrench size
zinc-plated, spindle gunmetal-finish
high grade tool steel

<h3 class="md-block-header-three">Elora 174-80/2 Battery Terminal Puller Span Width 10-90 mm</h3><h3 class="md-block-header-three">Product code: 174008026100 </h3><ul class="md-block-unordered-list-item"><li>Description:- For pulling off battery terminals, ball bearings, gear-wheels, etc. 2 arms 12 mm wrench size zinc-plated, spindle gunmetal-finish high grade tool steel</li><li>Span Width mm:- 33147</li><li>a mm:- 1,8</li><li>b mm:- 10</li><li>c mm:- 20</li><li>d mm:- 12</li><li>Span depth mm:- 84</li><li>Weight g:- 350</li></ul>

<h3>Elora 174-80/2 Battery Terminal Puller Span Width 10-90 mm</h3>
<h3>Product code: 174008026100 &nbsp;</h3>
<ul>
<li>Description:- For pulling off battery terminals, ball bearings, gear-wheels, etc. 
2 arms 
12 mm wrench size 
zinc-plated, spindle gunmetal-finish 
high grade tool steel</li>
<li>Span Width mm:- 33147</li>
<li>a mm:- 1,8</li>
<li>b mm:- 10</li>
<li>c mm:- 20</li>
<li>d mm:- 12</li>
<li>Span depth mm:- 84</li>
<li>Weight g:- 350</li>
</ul>

Stefy

Elora 174-80/2 Battery Terminal Puller Span Width 10-90 Mm

elora 174-80/2 battery terminal puller span width 10 90mm 174-80 lebar pullers penarik bateri elora/埃洛拉 2电池端子拉拔器跨度宽度10-90 拔轮器 埃洛拉

elora-174-80-2-battery-terminal-puller-span-width-10-90-mm

Elora 174-80/3 Battery Terminal Puller Span Width 10-90 mm

Description:- For pulling off battery terminals, ball bearings, gear-wheels, etc.
3 arms
12 mm wrench size 12 mm
zinc-plated, spindle gunmetal-finish
high grade tool steel

<h3 class="md-block-header-three">Elora 174-80/3 Battery Terminal Puller Span Width 10-90 mm</h3><h3 class="md-block-header-three">Product code: 174008036100 </h3><ul class="md-block-unordered-list-item"><li>Description:- For pulling off battery terminals, ball bearings, gear-wheels, etc. 3 arms 12 mm wrench size 12 mm zinc-plated, spindle gunmetal-finish high grade tool steel</li><li>Span Width mm:- 33147</li><li>a mm:- 1,8</li><li>b mm:- 10</li><li>c mm:- 20</li><li>d mm:- 12</li><li>Span depth mm:- 84</li><li>Weight g:- 450</li></ul>

<h3>Elora 174-80/3 Battery Terminal Puller Span Width 10-90 mm</h3>
<h3>Product code: 174008036100 </h3>
<ul>
<li>Description:- For pulling off battery terminals, ball bearings, gear-wheels, etc. 
3 arms 
12 mm wrench size 12 mm 
zinc-plated, spindle gunmetal-finish 
high grade tool steel</li>
<li>Span Width mm:- 33147</li>
<li>a mm:- 1,8</li>
<li>b mm:- 10</li>
<li>c mm:- 20</li>
<li>d mm:- 12</li>
<li>Span depth mm:- 84</li>
<li>Weight g:- 450</li>
</ul>

Elora 174-80/3 Battery Terminal Puller Span Width 10-90 Mm

elora 174-80/3 battery terminal puller span width 10 90mm 174-80 lebar pullers penarik bateri elora/埃洛拉 3电池端子拉拔器跨度宽度10-90 拔轮器 埃洛拉

elora-174-80-3-battery-terminal-puller-span-width-10-90-mm

Ntn 6814Open Deep Groove Ball Bearing 70x90x10mm

 Brand / Quality: NTN - High Quality
Inside Diameter: 70mm
Outside Diameter: 90mm
Width: 10mm
Seals / Shields: None 

ex-stock subject to prior sales otherwise 6-8 months

<h3 class="md-block-header-three">Ntn 6814Open Deep Groove Ball Bearing 70x90x10mm</h3> Brand / Quality: NTN - High Quality Inside Diameter: 70mm Outside Diameter: 90mm Width: 10mm Seals / Shields: None ex-stock subject to prior sales otherwise 6-8 months

<h3>Ntn 6814Open Deep Groove Ball Bearing 70x90x10mm</h3>
&nbsp;Brand / Quality: NTN - High Quality 
Inside Diameter: 70mm 
Outside Diameter: 90mm 
Width: 10mm 
Seals / Shields: None&nbsp;
ex-stock subject to prior sales otherwise 6-8 months

Jacki Chiang Chee Keong

buyerIntroduction

ntn 6814open deep groove ball bearing 70x90x10mm 6814buka bantalan bola alur dalam bearings bebola ntn/南通 6814开式深沟球轴承 球轴承 南通

ntn-6814open-deep-groove-ball-bearing-70x90x10mm

Rfs Brass 10mm Od X 1/4" Male Npt 90 Degree Elbow Compression Fittings, Light Series F-D-B-L90M-N-10L-04

What Is compression DIN fittings – 90D Male Elbow

Compression fittings are commonly used in applications that requires excellent sealing in high temperature and pressure setting. These fittings are also known as single ferrule. They have a simpler design than double ferrules. Compression fittings are made to DIN 2353, ISO 8434-1, and DIN EN 3851 standards. These fittings are available in 3 series; S, L, and LL. Each series is made to suit different pressure needs. S series (high pressure) fitting has a working pressure of 315 to 630 bars, while L series (light pressure) fitting has a working pressure between 160 to 315 bars. The lowest pressure (LL) series is 100 bars. Compression fittings can be assembled and reassembled many times. Fittings vary in design but they are all made up of three parts; Body, nut, and sleeve. The benefits offered by compression fitting are fewer leak paths, dampens vibration, flexibility, and ease of installation.  To install a compression fitting, place the ring and nut over the tube. Then, use a pre-assembly tool and insert the tube up to tube abutment and tighten it with 1 1/4 turns. Remove the pre-assembly tool and untighten it. Remove the nut to see if there is any visible ring formed over the tube. Use a wrench to tighten the nut with the fitting body in an upward position until there is a noticeable feeling in increase of torque and further tighten the nut ¼ turn. Single ferrule 90-degree male elbow combines pipes together at a 90-degree angle. One end is compression and the other is male NPT thread. It is most suitable to connect pipes where a turn of direction is needed in the flow of the system. 

Size	: 6mm to 25mm & 1/8” to 1”
Series : L (Light Series) & S (Heavy Series)
Working Pressure (bar) : L series (160-315) & S series (315-630)
Material : Brass
Material Standard : DIN 2353 / DIN EN 3851 / ISO 8434-1
Connection type : NPT / BSPP / BSPT

Step 1 : Cutting ring and nut to be placed over the tube in the correct direction.
Step 2 : Insert tube into pre-assembly tool up to tube abutment and tighten with the nut.
Step 3 : Tighten 1 ¼ turns beyond the hand tighten position by using a wrench.
Step 4 : Take out the pre-assembly and untighten and remove the nut to check the ring formed up over the tube. The visible ring is formed up with the penetration of the cutting ring into the tube surface.
Step 5 : With fitting body holding up, use a wrench to tighten the nut until a noticeable increase in torque in felt. Beyond this point tighten the nut ¼ turn for last round of assembly.

<h3 class="md-block-header-three">Rfs Brass 10mm Od X 1/4&quot; Male Npt 90 Degree Elbow Compression Fittings, Light Series F-D-B-L90M-N-10L-04</h3>What Is compression DIN fittings – 90D Male ElbowCompression fittings are commonly used in applications that requires excellent sealing in high temperature and pressure setting. These fittings are also known as single ferrule. They have a simpler design than double ferrules. Compression fittings are made to DIN 2353, ISO 8434-1, and DIN EN 3851 standards. These fittings are available in 3 series; S, L, and LL. Each series is made to suit different pressure needs. S series (high pressure) fitting has a working pressure of 315 to 630 bars, while L series (light pressure) fitting has a working pressure between 160 to 315 bars. The lowest pressure (LL) series is 100 bars. Compression fittings can be assembled and reassembled many times. Fittings vary in design but they are all made up of three parts; Body, nut, and sleeve. The benefits offered by compression fitting are fewer leak paths, dampens vibration, flexibility, and ease of installation. To install a compression fitting, place the ring and nut over the tube. Then, use a pre-assembly tool and insert the tube up to tube abutment and tighten it with 1 1/4 turns. Remove the pre-assembly tool and untighten it. Remove the nut to see if there is any visible ring formed over the tube. Use a wrench to tighten the nut with the fitting body in an upward position until there is a noticeable feeling in increase of torque and further tighten the nut ¼ turn. Single ferrule 90-degree male elbow combines pipes together at a 90-degree angle. One end is compression and the other is male NPT thread. It is most suitable to connect pipes where a turn of direction is needed in the flow of the system. About 90 D Male ElbowSize	: 6mm to 25mm &amp; 1/8” to 1” Series : L (Light Series) &amp; S (Heavy Series) Working Pressure (bar) : L series (160-315) &amp; S series (315-630) Material : Brass Material Standard : DIN 2353 / DIN EN 3851 / ISO 8434-1 Connection type : NPT / BSPP / BSPTDIN Fittings installation guidelines:Step 1 : Cutting ring and nut to be placed over the tube in the correct direction. Step 2 : Insert tube into pre-assembly tool up to tube abutment and tighten with the nut. Step 3 : Tighten 1 ¼ turns beyond the hand tighten position by using a wrench. Step 4 : Take out the pre-assembly and untighten and remove the nut to check the ring formed up over the tube. The visible ring is formed up with the penetration of the cutting ring into the tube surface. Step 5 : With fitting body holding up, use a wrench to tighten the nut until a noticeable increase in torque in felt. Beyond this point tighten the nut ¼ turn for last round of assembly.

<h3>Rfs Brass 10mm Od X 1/4" Male Npt 90 Degree Elbow Compression Fittings, Light Series F-D-B-L90M-N-10L-04</h3>
What Is compression DIN fittings – 90D Male Elbow
Compression fittings are commonly used in applications that requires excellent sealing in high temperature and pressure setting. These fittings are also known as single ferrule. They have a simpler design than double ferrules. Compression fittings are made to DIN 2353, ISO 8434-1, and DIN EN 3851 standards. These fittings are available in 3 series; S, L, and LL. Each series is made to suit different pressure needs. S series (high pressure) fitting has a working pressure of 315 to 630 bars, while L series (light pressure) fitting has a working pressure between 160 to 315 bars. The lowest pressure (LL) series is 100 bars. Compression fittings can be assembled and reassembled many times. Fittings vary in design but they are all made up of three parts; Body, nut, and sleeve. The benefits offered by compression fitting are fewer leak paths, dampens vibration, flexibility, and ease of installation. To install a compression fitting, place the ring and nut over the tube. Then, use a pre-assembly tool and insert the tube up to tube abutment and tighten it with 1 1/4 turns. Remove the pre-assembly tool and untighten it. Remove the nut to see if there is any visible ring formed over the tube. Use a wrench to tighten the nut with the fitting body in an upward position until there is a noticeable feeling in increase of torque and further tighten the nut ¼ turn. Single ferrule 90-degree male elbow combines pipes together at a 90-degree angle. One end is compression and the other is male NPT thread. It is most suitable to connect pipes where a turn of direction is needed in the flow of the system.&nbsp;
About 90 D Male Elbow
Size	: 6mm to 25mm &amp; 1/8” to 1” 
Series : L (Light Series) &amp; S (Heavy Series) 
Working Pressure (bar) : L series (160-315) &amp; S series (315-630) 
Material : Brass 
Material Standard : DIN 2353 / DIN EN 3851 / ISO 8434-1 
Connection type : NPT / BSPP / BSPT
DIN Fittings installation guidelines:
Step 1 : Cutting ring and nut to be placed over the tube in the correct direction. 
Step 2 : Insert tube into pre-assembly tool up to tube abutment and tighten with the nut. 
Step 3 : Tighten 1 ¼ turns beyond the hand tighten position by using a wrench. 
Step 4 : Take out the pre-assembly and untighten and remove the nut to check the ring formed up over the tube. The visible ring is formed up with the penetration of the cutting ring into the tube surface. 
Step 5 : With fitting body holding up, use a wrench to tighten the nut until a noticeable increase in torque in felt. Beyond this point tighten the nut ¼ turn for last round of assembly.

AF Hydro

Oleo Tecnica

Others

BOTHWELL

LAME

Stauff

Flanges

Hydraulic Tools

Pipe Adaptor

Pipe Coupling

Pipe Clamps

Hose Clamp

Stainless Steel Tubes

Ferrule Fittings

Pipe Nipple

Kelvin How

Rfs Brass 10mm Od X 1/4" Male Npt 90 Degree Elbow Compression Fittings, Light Series

rfs brass 10mm od 1/4" male npt 90 degree elbow compression fittings, light series 1/4 "male pipe pipa siku hydraulics loyang kelengkapan mampatan lelaki darjah, siri ringan paip hydraulics/rfs 液压 黄铜 外径 外螺纹 度弯头压缩接头，轻型系列

rfs-brass-10mm-od-x-1-4-male-npt-90-degree-elbow-compression-fittings-light-series

M10 005-072-0809 8X9MM (din Type) Dble Open Wr

Chrome vanadium steel, sunk panel, matt finish DIN standard 

<h3 class="md-block-header-three">M10 005-072-0809 8X9MM (din Type) Dble Open Wr</h3>Chrome vanadium steel, sunk panel, matt finish DIN standard Size: 8 x 9 mm Length: 140 mm

<h3>M10 005-072-0809 8X9MM (din Type) Dble Open Wr</h3>
Chrome vanadium steel, sunk panel, matt finish DIN standard&nbsp;
Size: 8 x 9 mm 
Length: 140 mm

m10 005-072-0809 8x9mm (din type) dble open wr (tipe din) end spanners kunci pas ujung terbuka (jenis sepana hujung 型) 双开 开口扳手

m10-005-072-0809-8x9mm-din-type-dble-open-wr

Ntn 6200Open Deep Groove Ball Bearing 10x30x9mm

One of the most commonly used bearings, the open types are manufactured without seals to allow for the free circulation of either oil or grease, used in gearboxes and other environments where no foreign matter would be present and a lubricant supply is available. 

Brand / Quality: NTN - High Quality
Inside Diameter: 10mm
Outside Diameter: 30mm
Width: 9mm
Seals / Shields: None 

 ex-stock subject to prior sales otherwise 6-8 months 

<h3 class="md-block-header-three">Ntn 6200Open Deep Groove Ball Bearing 10x30x9mm</h3>One of the most commonly used bearings, the open types are manufactured without seals to allow for the free circulation of either oil or grease, used in gearboxes and other environments where no foreign matter would be present and a lubricant supply is available. Brand / Quality: NTN - High Quality Inside Diameter: 10mm Outside Diameter: 30mm Width: 9mm Seals / Shields: None ex-stock subject to prior sales otherwise 6-8 months

<h3>Ntn 6200Open Deep Groove Ball Bearing 10x30x9mm</h3>
One of the most commonly used bearings, the open types are manufactured without seals to allow for the free circulation of either oil or grease, used in gearboxes and other environments where no foreign matter would be present and a lubricant supply is available.&nbsp;
Brand / Quality: NTN - High Quality 
Inside Diameter: 10mm 
Outside Diameter: 30mm 
Width: 9mm 
Seals / Shields: None&nbsp;
 ex-stock subject to prior sales otherwise 6-8 months

ntn 6200open deep groove ball bearing 10x30x9mm 6200buka bantalan bola alur dalam bearings bebola ntn/南通 6200开式深沟球轴承 球轴承 南通

ntn-6200open-deep-groove-ball-bearing-10x30x9mm

Facom 90 Degree flanged/try Square Steel With Base, 500 X 330mm Class 2 DELA.1257.10

Length: 500 mm,
Weight: 2.6 kg.
Warranty Type: L.

<h3 class="md-block-header-three">Facom 90 Degree flanged/try Square Steel With Base, 500 X 330mm Class 2 DELA.1257.10</h3>Length: 500 mm, Weight: 2.6 kg. Warranty Type: L.

<h3>Facom 90 Degree flanged/try Square Steel With Base, 500 X 330mm Class 2 DELA.1257.10</h3>
Length: 500 mm, 
Weight: 2.6 kg. 
Warranty Type: L.

Allen 

Fong Siew Sen

RIDGID TOOLS

Pelican

OptiMax

PROTOOLS

Combination Spanners

Other Tools

Socket Sets

Screwdrivers

Ring Spanners

Screwdriver Bits & Bit Set

Torque Wrenches

Tap & Die Wrenches

ALLEN Chiang

facom 90 degree flanged/try square steel base, 500 330mm class dela.1257.10 derajat bergelang coba baja persegi dengan basis, kelas measuring tools alat ukur lainnya darjah bebibir/cuba keluli tapak, pengukur lain facom/法康 度法兰/试用方形钢带底座，500 其他量具用品 法康

facom-90-degree-flanged-try-square-steel-with-base-500-x-330mm-class-2-dela-1257-10

Nietz Heavy Duty Grease With Ep 2kg 506-21-200

Soft Appearance, Smooth Structure, Excellent in Water Resistant & Natural Oil Colour

Multi-Purpose Grease which Suitable for a wide range of Industrial & Automotive Applications

Includes Plain Bearing, Slow Speed Wheel & Anti-Friction Bearings, Chassis Grease, General Plant Lubricant & Agricultural & Construction Equipment Lubrication.

Temperature Range for continuous service is 90°C

Temperature Range with frequent Re-lubrication up to 100°C

Worked Penetration @ 25°C / 77°F, ASTM D-217 : 265 - 285

Base Oil Viscosity cSt at 100°C (212°F), ASTM D-445 : Minimum 10

Dropping Point, ASTM D-2265 : 125°C / 257°F +/- 5

Viscosity Index, ASTM D-2270 : Minimum 95

<h3 class="md-block-header-three">Nietz Heavy Duty Grease With Ep 2kg 506-21-200</h3>HEAVY DUTY GREASE with EPSoft Appearance, Smooth Structure, Excellent in Water Resistant &amp; Natural Oil ColourMulti-Purpose Grease which Suitable for a wide range of Industrial &amp; Automotive ApplicationsIncludes Plain Bearing, Slow Speed Wheel &amp; Anti-Friction Bearings, Chassis Grease, General Plant Lubricant &amp; Agricultural &amp; Construction Equipment Lubrication.Temperature Range for continuous service is 90°CTemperature Range with frequent Re-lubrication up to 100°C<ul class="md-block-unordered-list-item"><li>Code : 506-21-200</li><li>Weight : 2.0 Kg</li><li>Can/Ctn : 9</li><li>NLGI Grade : 2</li><li>Worked Penetration @ 25°C / 77°F, ASTM D-217 : 265 - 285</li><li>Base Oil Viscosity cSt at 100°C (212°F), ASTM D-445 : Minimum 10</li><li>Dropping Point, ASTM D-2265 : 125°C / 257°F +/- 5</li><li>Viscosity Index, ASTM D-2270 : Minimum 95</li><li>Timken OK Load : 18 kgs</li></ul>

<h3>Nietz Heavy Duty Grease With Ep 2kg 506-21-200</h3>
HEAVY DUTY GREASE with EP
Soft Appearance, Smooth Structure, Excellent in Water Resistant &amp; Natural Oil Colour
Multi-Purpose Grease which Suitable for a wide range of Industrial &amp; Automotive Applications
Includes Plain Bearing, Slow Speed Wheel &amp; Anti-Friction Bearings, Chassis Grease, General Plant Lubricant &amp; Agricultural &amp; Construction Equipment Lubrication.
Temperature Range for continuous service is 90°C
Temperature Range with frequent Re-lubrication up to 100°C
<ul>
<li>Code : 506-21-200</li>
<li>Weight : 2.0 Kg</li>
<li>Can/Ctn : 9</li>
<li>NLGI Grade : 2</li>
<li>Worked Penetration @ 25°C / 77°F, ASTM D-217 : 265 - 285</li>
<li>Base Oil Viscosity cSt at 100°C (212°F), ASTM D-445 : Minimum 10</li>
<li>Dropping Point, ASTM D-2265 : 125°C / 257°F +/- 5</li>
<li>Viscosity Index, ASTM D-2270 : Minimum 95</li>
<li>Timken OK Load : 18 kgs</li>
</ul>

Picasaf

STANLEY

BOSCH

CELONI

Buick

Strongman

SOBAR

Safety Shoes

Safety Helmet

Clamps

Fall Protection

Ropes & Chains

Darius Ong 

nietz heavy duty grease ep 2kg 506-21-200 dengan tugas berat gris nietz/尼茨 重负荷润滑脂 润滑脂 尼茨

nietz-heavy-duty-grease-with-ep-2kg-506-21-200

Proto 3/8'' Drive 5/8'' Af Socket Impact Std 6 Pt Steel Black 1.3/32''L 7220H

Torqueplus Impact Sockets 3/8 in, 3/8" Dr, 5/8 in, 6 Pt

Head Width : 29/32 in (opening side); 29/32 in (drive side)

<h3 class="md-block-header-three">Proto 3/8&#x27;&#x27; Drive 5/8&#x27;&#x27; Af Socket Impact Std 6 Pt Steel Black 1.3/32&#x27;&#x27;L 7220H</h3>Torqueplus Impact Sockets 3/8 in, 3/8&quot; Dr, 5/8 in, 6 PtStandard Pack: 1 EACountry Of Origin: USSPECIFICATIONS<ul class="md-block-unordered-list-item"><li>Drive Size : 3/8 in</li><li>Drive Type : Square</li><li>Finish : Black Oxide</li><li>Head Width : 29/32 in (opening side); 29/32 in (drive side)</li><li>Locking Type : Pin</li><li>Material : Forged Alloy Steel</li><li>Measuring System : Inch</li><li>No. of Points : 6</li><li>Opening Size : 5/8 in</li><li>Overall Length : 1 3/32 in</li><li>Wt. : 0.12 lb</li></ul>

<h3>Proto 3/8'' Drive 5/8'' Af Socket Impact Std 6 Pt Steel Black 1.3/32''L 7220H</h3>
Torqueplus Impact Sockets 3/8 in, 3/8" Dr, 5/8 in, 6 Pt
Standard Pack: 1 EA
Country Of Origin: US
SPECIFICATIONS
<ul>
<li>Drive Size : 3/8 in</li>
<li>Drive Type : Square</li>
<li>Finish : Black Oxide</li>
<li>Head Width : 29/32 in (opening side); 29/32 in (drive side)</li>
<li>Locking Type : Pin</li>
<li>Material : Forged Alloy Steel</li>
<li>Measuring System : Inch</li>
<li>No. of Points : 6</li>
<li>Opening Size : 5/8 in</li>
<li>Overall Length : 1 3/32 in</li>
<li>Wt. : 0.12 lb</li>
</ul>