AF Hydro

BOTHWELL

Swagelok

管件

Pipe Fittings

pipe fittings

Perlengkapan Pipa

Kelengkapan Paip

อุปกรณ์ท่อ

pipe-fittings

Pipe union fitting extends the pipeline by attaching pipes without any deformation. A pipe union has three parts which are the female end, male end, and the nut. The nut exert pressure onto the female and male end, hence providing the necessary pressure to seal the fitting. If there is too much pressure, the locking screw breaks. This separates the union fitting, hence releasing the pipes without causing any damage or deformities. 

Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  

The threaded ends ease installation and provide a tighter connection. Welding is not required.

Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.

Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.

To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. 

Remove any excess tape and tighten the joints. 

Do avoid excessive screwing as it may damage the pipe or the fitting. 

Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.

<h3 class="md-block-header-three"><strong class="md-inline-bold">About This Product</strong></h3><p class="md-block-unstyled">Pipe union fitting extends the pipeline by attaching pipes without any deformation. A pipe union has three parts which are the female end, male end, and the nut. The nut exert pressure onto the female and male end, hence providing the necessary pressure to seal the fitting. If there is too much pressure, the locking screw breaks. This separates the union fitting, hence releasing the pipes without causing any damage or deformities. </p><h3 class="md-block-header-three"><strong class="md-inline-bold">More About #150 Fittings</strong></h3><p class="md-block-unstyled">Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  </p><ul class="md-block-unordered-list-item"><li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li><li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li><li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">How to Connect #150 Fittings?</strong></h3><ol class="md-block-ordered-list-item"><li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. </li><li>Remove any excess tape and tighten the joints. </li><li>Do avoid excessive screwing as it may damage the pipe or the fitting. </li><li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li></ol>

<h3><strong>About This Product</strong></h3>
<p>Pipe union fitting extends the pipeline by attaching pipes without any deformation. A pipe union has three parts which are the female end, male end, and the nut. The nut exert pressure onto the female and male end, hence providing the necessary pressure to seal the fitting. If there is too much pressure, the locking screw breaks. This separates the union fitting, hence releasing the pipes without causing any damage or deformities.&nbsp;</p>
<h3><strong>More About #150 Fittings</strong></h3>
<p>Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.&nbsp;&nbsp;</p>
<ul>
<li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li>
<li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li>
<li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li>
</ul>
<h3><strong>How to Connect #150 Fittings?</strong></h3>
<ol>
<li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.&nbsp;</li>
<li>Remove any excess tape and tighten the joints.&nbsp;</li>
<li>Do avoid excessive screwing as it may damage the pipe or the fitting.&nbsp;</li>
<li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li>
</ol>


Oleo Tecnica

RFS Hydraulics

Others

LAME

Stauff

Flanges

Hydraulic Tools

Pipe Adaptor

Pipe Coupling

Pipe Clamps

Hose Clamp

Stainless Steel Tubes

Ferrule Fittings

Pipe Elbow

Pipe Nipple

Kelvin How

buyerIntroduction

1 1/2"NPT Female Stainless Steel SS316 Pipe Union Fitting 150 Psi

1/2"npt female stainless steel ss316 pipe union fitting 150psi 1/2 "npt wanita pipa af hydro keluli tahan karat pemasangan kesatuan paip 内螺纹不锈钢 管接头 af水电

1-1-2-npt-female-stainless-steel-ss316-pipe-union-fitting-150-psi

Socket Weld Union

Bothwell Carbon Steel A105 Forged Pipe Fitting, Union, 3/8" Socket Weld, 3000 Psi

bothwell carbon steel a105 forged pipe fitting, union, 3/8" socket weld, 3000psi pemasangan pipa ditempa, union keluli karbon paip palsu, kesatuan, kimpalan soket 3/8", kesatuan 碳钢 锻造管件，活接头，3/8" 承插焊，3000 博思韦尔

bothwell-carbon-steel-a105-forged-pipe-fitting-union-3-8-socket-weld-3000-psi

<p class="md-block-unstyled"> </p><h3 class="md-block-header-three"><strong class="md-inline-bold">About This Product</strong></h3><p class="md-block-unstyled">Pipe union fitting extends the pipeline by attaching pipes without any deformation. A pipe union has three parts which are the female end, male end, and the nut. The nut exert pressure onto the female and male end, hence providing the necessary pressure to seal the fitting. If there is too much pressure, the locking screw breaks. This separates the union fitting, hence releasing the pipes without causing any damage or deformities. </p><h3 class="md-block-header-three"><strong class="md-inline-bold">More About #150 Fittings</strong></h3><p class="md-block-unstyled">Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  </p><ul class="md-block-unordered-list-item"><li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li><li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li><li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">How to Connect #150 Fittings?</strong></h3><ol class="md-block-ordered-list-item"><li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. </li><li>Remove any excess tape and tighten the joints. </li><li>Do avoid excessive screwing as it may damage the pipe or the fitting. </li><li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li></ol>

<p>&nbsp;</p>
<h3><strong>About This Product</strong></h3>
<p>Pipe union fitting extends the pipeline by attaching pipes without any deformation. A pipe union has three parts which are the female end, male end, and the nut. The nut exert pressure onto the female and male end, hence providing the necessary pressure to seal the fitting. If there is too much pressure, the locking screw breaks. This separates the union fitting, hence releasing the pipes without causing any damage or deformities.&nbsp;</p>
<h3><strong>More About #150 Fittings</strong></h3>
<p>Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.&nbsp;&nbsp;</p>
<ul>
<li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li>
<li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li>
<li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li>
</ul>
<h3><strong>How to Connect #150 Fittings?</strong></h3>
<ol>
<li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.&nbsp;</li>
<li>Remove any excess tape and tighten the joints.&nbsp;</li>
<li>Do avoid excessive screwing as it may damage the pipe or the fitting.&nbsp;</li>
<li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.</li>
</ol>


1/8"NPT Female Stainless Steel SS316 Pipe Union Fitting 150 Psi

1/8"npt female stainless steel ss316 pipe union fitting 150psi 1/8 "npt wanita pipa af hydro keluli tahan karat pemasangan kesatuan paip 内螺纹不锈钢 管接头 af水电

1-8-npt-female-stainless-steel-ss316-pipe-union-fitting-150-psi

1/2"NPT Female Stainless Steel SS316 Pipe Union Fitting 150 Psi

1-2-npt-female-stainless-steel-ss316-pipe-union-fitting-150-psi

3/8"NPT Female Stainless Steel SS316 Pipe Union Fitting 150 Psi

3/8"npt female stainless steel ss316 pipe union fitting 150psi 3/8 "npt wanita pipa af hydro keluli tahan karat pemasangan kesatuan paip 内螺纹不锈钢 管接头 af水电

3-8-npt-female-stainless-steel-ss316-pipe-union-fitting-150-psi

1/4"NPT Female Stainless Steel SS316 Pipe Union Fitting 150 Psi

1/4"npt female stainless steel ss316 pipe union fitting 150psi 1/4 "npt wanita pipa af hydro keluli tahan karat pemasangan kesatuan paip 内螺纹不锈钢 管接头 af水电

1-4-npt-female-stainless-steel-ss316-pipe-union-fitting-150-psi

Bothwell Carbon Steel A105 Forged Pipe Fitting, Union, 1 1/2" Socket Weld, 3000 Psi

bothwell carbon steel a105 forged pipe fitting, union, 1/2" socket weld, 3000psi pemasangan pipa tempa, union keluli karbon paip kesatuan, kimpalan soket 1/2", kesatuan 碳钢 锻造管件，活接头，1 承插焊，3000 博思韦尔

bothwell-carbon-steel-a105-forged-pipe-fitting-union-1-1-2-socket-weld-3000-psi

Cleaning Process	Standard Cleaning and Packaging (SC-10)

<h3 class="md-block-header-three"><strong class="md-inline-bold">Swagelok SS-8-RB-6 Union Pipe</strong></h3><p class="md-block-unstyled">Body Material	316 Stainless Steel</p><p class="md-block-unstyled">Cleaning Process	Standard Cleaning and Packaging (SC-10)</p><p class="md-block-unstyled">Connection 1 Size	1/2 in.</p><p class="md-block-unstyled">Connection 1 Type	Male NPT</p><p class="md-block-unstyled">Connection 2 Size	3/8 in.</p><p class="md-block-unstyled">Connection 2 Type	Female NPT</p><p class="md-block-unstyled">Flow Restrictor	No</p>

<h3><strong>Swagelok SS-8-RB-6 Union Pipe</strong></h3>
<p>Body Material	316 Stainless Steel</p>
<p>Cleaning Process	Standard Cleaning and Packaging (SC-10)</p>
<p>Connection 1 Size	1/2 in.</p>
<p>Connection 1 Type	Male NPT</p>
<p>Connection 2 Size	3/8 in.</p>
<p>Connection 2 Type	Female NPT</p>
<p>Flow Restrictor	No</p>


WEICON

Nietz

Pilot

Picasaf

Fellowes

DEVCON

Philips

BELZONA

Whatman

Writing Materials

Adhesive Glue

Epoxy

Degreasers

Threadlocker

Anti Rust Coating & Lubricant

Lubricants

Combination Spanners

Other Tools

Sealants

Darius Ong 

Swagelok SS-8-RB-6 Union Pipe

swagelok ss-8-rb-6 union pipe pipa persatuan kesatuan paip swagelok/世伟洛克 活接管 世伟洛克

swagelok-ss-8-rb-6-union-pipe

Connection 1 Type	Swagelok® Tube Fitting

Connection 2 Type	Swagelok® Tube Fitting

<h3 class="md-block-header-three"><strong class="md-inline-bold">Swagelok SS-810-6 Union</strong></h3><p class="md-block-unstyled">Body Material	316 Stainless Steel</p><p class="md-block-unstyled">Bored Through	No</p><p class="md-block-unstyled">Cleaning Process	Standard Cleaning and Packaging (SC-10)</p><p class="md-block-unstyled">Connection 1 Size	1/2 in.</p><p class="md-block-unstyled">Connection 1 Type	Swagelok® Tube Fitting</p><p class="md-block-unstyled">Connection 2 Size	1/2 in.</p><p class="md-block-unstyled">Connection 2 Type	Swagelok® Tube Fitting</p><p class="md-block-unstyled">Flow Restrictor	No</p>

<h3><strong>Swagelok SS-810-6 Union</strong></h3>
<p>Body Material	316 Stainless Steel</p>
<p>Bored Through	No</p>
<p>Cleaning Process	Standard Cleaning and Packaging (SC-10)</p>
<p>Connection 1 Size	1/2 in.</p>
<p>Connection 1 Type	Swagelok® Tube Fitting</p>
<p>Connection 2 Size	1/2 in.</p>
<p>Connection 2 Type	Swagelok® Tube Fitting</p>
<p>Flow Restrictor	No</p>


Swagelok SS-810-6 Union

swagelok ss-810-6 union serikat pipe kesatuan paip swagelok/世伟洛克 接头 世伟洛克

swagelok-ss-810-6-union

1"NPT Female Stainless Steel SS316 Pipe Union Fitting 150 Psi

1"npt female stainless steel ss316 pipe union fitting 150psi "npt wanita pipa af hydro 1"pemasangan kesatuan paip keluli tahan karat npt 内螺纹不锈钢 管接头 af水电

1-npt-female-stainless-steel-ss316-pipe-union-fitting-150-psi

2"NPT Female Stainless Steel SS316 Pipe Union Fitting 150 Psi

2"npt female stainless steel ss316 pipe union fitting 150psi "npt wanita pipa af hydro 2"pemasangan kesatuan paip keluli tahan karat npt 内螺纹不锈钢 管接头 af水电

2-npt-female-stainless-steel-ss316-pipe-union-fitting-150-psi

Threaded Union

Bothwell Carbon Steel A105 Forged Pipe Fitting, Union, 1/4" Npt Female, 3000 Psi

bothwell carbon steel a105 forged pipe fitting, union, 1/4" npt female, 3000psi pemasangan pipa ditempa, 1/4 "npt union keluli karbon paip tempa, kesatuan, perempuan, kesatuan 碳钢 锻造管件，活接头，1/4" 内螺纹，3000 博思韦尔

bothwell-carbon-steel-a105-forged-pipe-fitting-union-1-4-npt-female-3000-psi

3/4"NPT Female Stainless Steel SS316 Pipe Union Fitting 150 Psi

3/4"npt female stainless steel ss316 pipe union fitting 150psi 3/4 "npt wanita pipa af hydro keluli tahan karat pemasangan kesatuan paip 内螺纹不锈钢 管接头 af水电

3-4-npt-female-stainless-steel-ss316-pipe-union-fitting-150-psi

Bothwell Carbon Steel A105 Forged Pipe Fitting, Union, 1 1/4" Npt Female, 3000 Psi

bothwell carbon steel a105 forged pipe fitting, union, 1/4" npt female, 3000psi pemasangan pipa tempa, perempuan, union keluli karbon paip kesatuan, kesatuan 碳钢 锻造管接头，活接，1 内螺纹，3000 博思韦尔

bothwell-carbon-steel-a105-forged-pipe-fitting-union-1-1-4-npt-female-3000-psi

1 1/4"NPT Female Stainless Steel SS316 Pipe Union Fitting 150 Psi

1-1-4-npt-female-stainless-steel-ss316-pipe-union-fitting-150-psi

<h3 class="md-block-header-three"><strong class="md-inline-bold">Swagelok SS-10M0-6 Union</strong></h3><ul class="md-block-unordered-list-item"><li>Body Material	316 Stainless Steel</li><li>Bored Through	No</li><li>Cleaning Process	Standard Cleaning and Packaging (SC-10)</li><li>Connection 1 Size	10 mm</li><li>Connection 1 Type	Swagelok® Tube Fitting</li><li>Connection 2 Size	10 mm</li><li>Connection 2 Type	Swagelok® Tube Fitting</li><li>Flow Restrictor	No</li></ul>

<h3><strong>Swagelok SS-10M0-6 Union</strong></h3>
<ul>
<li>Body Material	316 Stainless Steel</li>
<li>Bored Through	No</li>
<li>Cleaning Process	Standard Cleaning and Packaging (SC-10)</li>
<li>Connection 1 Size	10 mm</li>
<li>Connection 1 Type	Swagelok® Tube Fitting</li>
<li>Connection 2 Size	10 mm</li>
<li>Connection 2 Type	Swagelok® Tube Fitting</li>
<li>Flow Restrictor	No</li>
</ul>


Swagelok SS-10M0-6 Union

swagelok ss-10m0-6 union serikat pipe kesatuan paip swagelok/世伟洛克 活接 世伟洛克

swagelok-ss-10m0-6-union