MAKITA

Proto

Sherwood

SWISS+TECH

Wurth

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

Spanners & Sockets

spanners-sockets

Combination Spanners

combination-spanners

Power Tools

power-tools

Drill Bits & Drill Bit Sets

drill-bits-drill-bit-sets

Drills, Impact Drivers & Wrenches

drills-impact-drivers-wrenches

Impact Sockets

impact-sockets

Ratchet Spanners

ratchet-spanners

Cutting Tools

cutting-tools

Threading Dies

threading-dies

Other Hand Tools

other-hand-tools

Threading Taps

threading-taps

Fabory

Kennedy-Pro

Atlas Workholders

Kennedy

Yamoto

Qualfast

Kengrip

Sockets

Screw

Swivel Castors

Files

Cromwell ETH 

buyerIntroduction

Sherwood SHR0864300K Unf, Threading Die, No.10 X 32, High Speed Steel, Right Hand

sherwood shr0864300k unf, threading die, no.10 32, high speed steel, right hand ​​unf, baja kecepatan tinggi, tangan kanan dies die benang, keluli berkelajuan sherwood/舍伍德 unf，螺纹板牙，no.10 32，高速钢，右手 舍伍德

sherwood-shr0864300k-unf-threading-die-no-10-x-32-high-speed-steel-right-hand

Swisstech SWT1853239B Threading Tap, No.10 X 32 Unf, Spiral Flute, Vanadium High Speed Steel, Bright

swisstech swt1853239b threading tap, no.10 32 unf, spiral flute, vanadium high speed steel, bright baja kecepatan tinggi vanadium, cerah taps swiss+tech ketuk benang, seruling lingkaran, keluli berkelajuan swiss+tech/瑞士科技 螺纹丝锥，no.10 unf，螺旋槽，钒高速钢，光亮 瑞士科技

swisstech-swt1853239b-threading-tap-no-10-x-32-unf-spiral-flute-vanadium-high-speed-steel-bright

Sherwood SHR0851090D Tap Set, No.10 X 32, Unf, High Speed Steel, Bright, Set of 3

sherwood shr0851090d tap set, no.10 32, unf, high speed steel, bright, set keran shr0851090d, baja kecepatan tinggi, cerah, isi threading taps ketik, keluli berkelajuan 丝锥套件，10 32 号，unf，高速钢，光亮，3 件套 舍伍德

sherwood-shr0851090d-tap-set-no-10-x-32-unf-high-speed-steel-bright-set-of-3

Sherwood SHR0851090A Taper Tap, Straight Flute, No.10 X 32 Unf, High Speed Steel, Unf, Bright

sherwood shr0851090a taper tap, straight flute, no.10 32 unf, high speed steel, bright flute lurus, baja kecepatan tinggi, cerah threading taps ketuk tirus, seruling keluli berkelajuan 锥度丝锥，直槽，no.10 unf，高速钢，unf，光亮 舍伍德

sherwood-shr0851090a-taper-tap-straight-flute-no-10-x-32-unf-high-speed-steel-unf-bright

YORK

Halo

Hex Keys & Sets

Screwdrivers

Pneumatic Quick Connect Couplings

Swisstech SWT1633210A 32, Short Slot Drill, 10mm, 3fl, Threaded Shank, Cobalt High Speed Steel, Uncoated

swisstech swt1633210a 32, short slot drill, 10mm, 3fl, threaded shank, cobalt high speed steel, uncoated bor pendek, shank berulir, baja kecepatan tinggi kobalt, tidak dilapisi drill bits bit sets mata set swiss+tech gerudi batang keluli berkelajuan bersalut 32，短槽钻，10mm，3fl，螺纹柄，钴高速钢，无涂层 钻头和钻头套装 瑞士科技

swisstech-swt1633210a-32-short-slot-drill-10mm-3fl-threaded-shank-cobalt-high-speed-steel-uncoated

Swisstech SWT1255002L Jobber Drill, 3/32In., Normal Helix, High Speed Steel, Tin (pack of 10)

swisstech swt1255002l jobber drill, 3/32in., normal helix, high speed steel, tin (pack 10) bor pekerja swt1255002l, helix normal, baja kecepatan tinggi, timah (paket drill bits bit sets mata set swiss+tech heliks biasa, keluli berkelajuan (pek gerudi 工作钻，3/32 英寸，普通螺旋，高速钢，锡（10 件装） 钻头和钻头套装 瑞士科技

swisstech-swt1255002l-jobber-drill-3-32in-normal-helix-high-speed-steel-tin-pack-of-10

Sherwood SHR0250243B Jobber Drill, 1/32In., Normal Helix, High Speed Steel, Bright (pack of 10)

sherwood shr0250243b jobber drill, 1/32in., normal helix, high speed steel, bright (pack 10) bor pekerjaan shr0250243b, helix normal, baja kecepatan tinggi, cerah (paket berisi drill bits bit sets mata set heliks biasa, keluli berkelajuan (pek gerudi 工作钻，1/32 英寸，普通螺旋，高速钢，光亮（10 件装） 钻头和钻头套装 舍伍德

sherwood-shr0250243b-jobber-drill-1-32in-normal-helix-high-speed-steel-bright-pack-of-10

Sherwood SHR0615502C Short Slot Drill, 3/32in., 2fl, Threaded Shank, High Speed Steel, Bright

sherwood shr0615502c short slot drill, 3/32in., 2fl, threaded shank, high speed steel, bright bor pendek, shank berulir, baja kecepatan tinggi, cerah drill bits bit sets mata set gerudi batang keluli berkelajuan 短槽钻头，3/32 英寸，2 盎司，螺纹柄，高速钢，光亮 钻头和钻头套装 舍伍德

sherwood-shr0615502c-short-slot-drill-3-32in-2fl-threaded-shank-high-speed-steel-bright

Compact Design with a Short Overall Length

Reliable 10 mm double sleeve keyless drill chuck for easy bit installation and removal

Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque

Variable speed control by trigger enables user to match the speed to the application

Recessed lock-on button for continuous use

Reversing switch is conveniently located   

Max Fastening Torque	Hard: 56.0 (500 in.lbs.) | Soft: 21.0 N·m (190 in.lbs.)

No Load Speed (RPM)	High: 0 - 1,500 | Low: 0 - 450

Dimensions (L x W x H)	220 x 67 x 206 mm (8-5/8" x 2-5/8" x 8-1/8")

<h3 class="md-block-header-three">MAKITA Driver Drill (10MM) DF0300</h3><ul class="md-block-unordered-list-item"><li>Compact Design with a Short Overall Length</li><li>Reliable 10 mm double sleeve keyless drill chuck for easy bit installation and removal</li><li>Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque</li><li>Variable speed control by trigger enables user to match the speed to the application</li><li>Recessed lock-on button for continuous use</li><li>Reversing switch is conveniently located </li><li>Warranty Time : 1 Years</li></ul><h3 class="md-block-header-three">Specification</h3><ul class="md-block-unordered-list-item"><li>Capacity	Steel: 10 mm (3/8&quot;)</li><li>Wood : 28 mm (1-1/8&quot;)</li><li>Continuous Rating Input	320 W</li><li>Chuck Capacity	1.0 - 10 mm (1/32 - 3/8&quot;)</li><li>Max Fastening Torque	Hard: 56.0 (500 in.lbs.) | Soft: 21.0 N·m (190 in.lbs.)</li><li>Max Lock Torque	42 N·m (370 in.lbs.)</li><li>No Load Speed (RPM)	High: 0 - 1,500 | Low: 0 - 450</li><li>Dimensions (L x W x H)	220 x 67 x 206 mm (8-5/8&quot; x 2-5/8&quot; x 8-1/8&quot;)</li><li>Net Weight	1.2 kg (2.6 lbs.)</li></ul>

<h3>MAKITA Driver Drill (10MM) DF0300</h3>
<ul>
<li>Compact Design with a Short Overall Length</li>
<li>Reliable 10 mm double sleeve keyless drill chuck for easy bit installation and removal</li>
<li>Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque</li>
<li>Variable speed control by trigger enables user to match the speed to the application</li>
<li>Recessed lock-on button for continuous use</li>
<li>Reversing switch is conveniently located&nbsp;&nbsp;&nbsp;</li>
<li>Warranty Time : 1 Years</li>
</ul>
<h3>Specification</h3>
<ul>
<li>Capacity	Steel: 10 mm (3/8")</li>
<li>Wood : 28 mm (1-1/8")</li>
<li>Continuous Rating Input	320 W</li>
<li>Chuck Capacity	1.0 - 10 mm (1/32 - 3/8")</li>
<li>Max Fastening Torque	Hard: 56.0 (500 in.lbs.) | Soft: 21.0 N·m (190 in.lbs.)</li>
<li>Max Lock Torque	42 N·m (370 in.lbs.)</li>
<li>No Load Speed (RPM)	High: 0 - 1,500 | Low: 0 - 450</li>
<li>Dimensions (L x W x H)	220 x 67 x 206 mm (8-5/8" x 2-5/8" x 8-1/8")</li>
<li>Net Weight	1.2 kg (2.6 lbs.)</li>
</ul>

Lim Kean Yong

BOSCH

STANLEY

DEWALT

HARDEX

BLACK AND DECKER

ST GUCHI

NIPPON

Grinders

Cutting & Sawing Machines

Power Saws

Other Power Tools

Vacuums & Floor Care

Mowers, Chainsaws & Outdoor Trimmers

Paints

Polishers & Sanders

Door Hardware & Locks

Lucas Lim

Makita Driver Drill (10MM) DF0300

makita driver drill (10mm) df0300 bor obeng drills, impact drivers wrenches bor, dampak kunci pas gerudi pemandu gerudi, pemacu hentaman perengkuh makita/牧田 电钻 钻，冲击起子和扳手 牧田

makita-driver-drill-10mm-df0300

General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Manufactured from High Speed Steel (HSS), each jobber drill is of an industrial quality, with a ground flute and a blue finish. The 21 piece set is supplied in an indexing metal case. The drills have a point angle of 118, a normal helix angle, a standard web thickness, a relief angle of 10-20, a tolerance of diameter of h8 and a tolerance of shank of f11

Manufactured from High Speed Steel (HSS) for durability

21 piece set ensures you have the right sized jobber drill to hand

Supplied in an indexed metal case for ease of storage and transportation

Suited for drilling steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite

What&#x27;s Included1 x 1/16in.1 x 5/64in.1 x 3/32in.1 x 7/64in.1 x 1/8in.1 x 9/64in.1 x 5/32in.1 x 11/64in.1 x 3/16in.1 x 13/64in.1 x 7/32in.1 x 15/64in.1 x 1/4in.1 x 17/64in.1 x 9/32in.1 x 19/64in.1 x 5/16in.1 x 21/64in.1 x 11/32in.1 x 23/64in.1 x 3/8in.FeaturesGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Manufactured from High Speed Steel (HSS), each jobber drill is of an industrial quality, with a ground flute and a blue finish. The 21 piece set is supplied in an indexing metal case. The drills have a point angle of 118, a normal helix angle, a standard web thickness, a relief angle of 10-20, a tolerance of diameter of h8 and a tolerance of shank of f11Manufactured from High Speed Steel (HSS) for durability21 piece set ensures you have the right sized jobber drill to handSupplied in an indexed metal case for ease of storage and transportationTypical ApplicationsSuited for drilling steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite StandardsBS328:Part 1DIN 338NANSI B94 - 11M

What's Included
1 x 1/16in.
1 x 5/64in.
1 x 3/32in.
1 x 7/64in.
1 x 1/8in.
1 x 9/64in.
1 x 5/32in.
1 x 11/64in.
1 x 3/16in.
1 x 13/64in.
1 x 7/32in.
1 x 15/64in.
1 x 1/4in.
1 x 17/64in.
1 x 9/32in.
1 x 19/64in.
1 x 5/16in.
1 x 21/64in.
1 x 11/32in.
1 x 23/64in.
1 x 3/8in.
Features
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Manufactured from High Speed Steel (HSS), each jobber drill is of an industrial quality, with a ground flute and a blue finish. The 21 piece set is supplied in an indexing metal case. The drills have a point angle of 118, a normal helix angle, a standard web thickness, a relief angle of 10-20, a tolerance of diameter of h8 and a tolerance of shank of f11
Manufactured from High Speed Steel (HSS) for durability
21 piece set ensures you have the right sized jobber drill to hand
Supplied in an indexed metal case for ease of storage and transportation
Typical Applications
Suited for drilling steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite

Standards
BS328:Part 1
DIN 338N
ANSI B94 - 11M

Sherwood SHR0258720K Jobber Drill Sets, Standard Length, Inch, High Speed Steel, Set of 21

sherwood shr0258720k jobber drill sets, standard length, inch, high speed steel, set 21 bor kerja shr0258720k, panjang standar, inci, baja kecepatan tinggi, isi bits bit sets mata gerudi pekerja, standard, keluli berkelajuan sherwood/舍伍德 木工钻头套装，标准长度，英寸，高速钢，21 件套 钻头和钻头套装 舍伍德

sherwood-shr0258720k-jobber-drill-sets-standard-length-inch-high-speed-steel-set-of-21

Ntn 6201Z Single Row Deep Groove Radial Ball Bearing, Normal Clearance, Steel Cage, 12 mm Bore ID, 32 mm OD, 10 mm Width, Single Shielded

Steel cage evenly spaces balls for reduced friction, vibration and noise

Shield on one side for protection against contaminants

CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision

ex-stock subject to prior sales otherwise 6-8 months

<h3 class="md-block-header-three">Ntn 6201Z Single Row Deep Groove Radial Ball Bearing, Normal Clearance, Steel Cage, 12 mm Bore ID, 32 mm OD, 10 mm Width, Single Shielded</h3><ul class="md-block-unordered-list-item"><li>Deep groove geometry for high speeds</li><li>Single row for supporting radial loads</li><li>Steel cage evenly spaces balls for reduced friction, vibration and noise</li><li>Shield on one side for protection against contaminants</li><li>CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision</li></ul>ex-stock subject to prior sales otherwise 6-8 months

<h3>Ntn 6201Z Single Row Deep Groove Radial Ball Bearing, Normal Clearance, Steel Cage, 12 mm Bore ID, 32 mm OD, 10 mm Width, Single Shielded</h3>
<ul>
<li>Deep groove geometry for high speeds</li>
<li>Single row for supporting radial loads</li>
<li>Steel cage evenly spaces balls for reduced friction, vibration and noise</li>
<li>Shield on one side for protection against contaminants</li>
<li>CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision</li>
</ul>
ex-stock subject to prior sales otherwise 6-8 months

Jacki Chiang Chee Keong

Ntn 6201Z Single Row Deep Groove Radial Ball Bearing, Normal Clearance, Steel Cage, 12 Mm Bore Id, 32 Mm Od, 10 Mm Width, Single Shielded

ntn 6201z single row deep groove radial ball bearing, normal clearance, steel cage, 12mm bore id, 32 od, 10 width, shielded bantalan bola alur dalam baris tunggal, jarak bebas normal, sangkar baja, id bor mm, od lebar terlindung tunggal bearings bearing galas bebola jejari dalam, kelegaan keluli, gerbang ntn/南通 单列深沟向心球轴承，正常游隙，钢保持架，内径 毫米，外径 毫米，宽度 毫米，单屏蔽 球轴承 南通

ntn-6201z-single-row-deep-groove-radial-ball-bearing-normal-clearance-steel-cage-12-mm-bore-id-32-mm-od-10-mm-width-single-shielded

Wurth Hammer Drill Bit Plus QUADRO-L Vario D10,0-L455-WL390MM DRL-HAM-PLUS-Q-LV-D10,0-L455-WL390MM

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

Significantly improved compatibility with reinforcements

The symmetrical 4 x 90° cutting edge geometry (up to Ø 10 mm with solid carbide head) prevents the drill bit from hooking in or running off centre when striking e.g. reinforcements.

The advanced tip geometry and asymmetrically placed elevations on the cutting edges ensure improved traction.

Perfect drilling properties over the entire service life

Head geometry that is tailored to the drill bit diameter

5–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability.

18–32 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces.

Considerably improved drilling speed and dust removal while at the same time offering increased protection against breakage

Vario spiral conveyor with back that narrows at the front and widens at the rear, as well as sharper angle at the spiral end ensures reduced friction, high stability and maximum transmission of impact energy.

Drill bit with four cutting edges and four-spiral geometry to ensure that the bit is guided perfectly into the drilled hole.

The special self-centring tip enables high-precision spot drilling.  


Drilling speed (point system) 2 of 4 points

Smoothness of running (points system) 4 of 4 points

Reinforcement strength (points system) 4 of 4 points

Service life (points system) 4 of 4 points

Tool holding device Suitable for SDS-plus

<h3 class="md-block-header-three">Wurth Hammer Drill Bit Plus QUADRO-L Vario D10,0-L455-WL390MM DRL-HAM-PLUS-Q-LV-D10,0-L455-WL390MM</h3>The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcementSignificantly improved compatibility with reinforcementsThe symmetrical 4 x 90° cutting edge geometry (up to Ø 10 mm with solid carbide head) prevents the drill bit from hooking in or running off centre when striking e.g. reinforcements.Noticeably quicker drillingThe advanced tip geometry and asymmetrically placed elevations on the cutting edges ensure improved traction.Perfect drilling properties over the entire service life<ul class="md-block-unordered-list-item"><li>Head geometry that is tailored to the drill bit diameter</li><li>5–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability.</li><li>18–32 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces.</li></ul>Considerably improved drilling speed and dust removal while at the same time offering increased protection against breakageVario spiral conveyor with back that narrows at the front and widens at the rear, as well as sharper angle at the spiral end ensures reduced friction, high stability and maximum transmission of impact energy.Optimum guidance in drilled holeDrill bit with four cutting edges and four-spiral geometry to ensure that the bit is guided perfectly into the drilled hole.Precise spot drillingThe special self-centring tip enables high-precision spot drilling. <h3 class="md-block-header-three">Technical Information</h3><ul class="md-block-unordered-list-item"><li>Drilling speed (point system) 2 of 4 points</li><li>Smoothness of running (points system) 4 of 4 points</li><li>Accuracy (point system) 4 of 4 points</li><li>Reinforcement strength (points system) 4 of 4 points</li><li>Service life (points system) 4 of 4 points</li><li>Diameter (Ø) 10 mm</li><li>Length 455 mm</li><li>Working length 390 mm</li><li>Number of cutting edges 4 PCS</li><li>Tool holding device Suitable for SDS-plus</li></ul>

<h3>Wurth Hammer Drill Bit Plus QUADRO-L Vario D10,0-L455-WL390MM DRL-HAM-PLUS-Q-LV-D10,0-L455-WL390MM</h3>
The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement
Significantly improved compatibility with reinforcements
The symmetrical 4 x 90° cutting edge geometry (up to Ø 10 mm with solid carbide head) prevents the drill bit from hooking in or running off centre when striking e.g. reinforcements.
Noticeably quicker drilling
The advanced tip geometry and asymmetrically placed elevations on the cutting edges ensure improved traction.
Perfect drilling properties over the entire service life
<ul>
<li>Head geometry that is tailored to the drill bit diameter</li>
<li>5–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability.</li>
<li>18–32 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces.</li>
</ul>
Considerably improved drilling speed and dust removal while at the same time offering increased protection against breakage
Vario spiral conveyor with back that narrows at the front and widens at the rear, as well as sharper angle at the spiral end ensures reduced friction, high stability and maximum transmission of impact energy.
Optimum guidance in drilled hole
Drill bit with four cutting edges and four-spiral geometry to ensure that the bit is guided perfectly into the drilled hole.
Precise spot drilling
The special self-centring tip enables high-precision spot drilling. 

<h3>Technical Information</h3>
<ul>
<li>Drilling speed (point system) 2 of 4 points</li>
<li>Smoothness of running (points system) 4 of 4 points</li>
<li>Accuracy (point system) 4 of 4 points</li>
<li>Reinforcement strength (points system) 4 of 4 points</li>
<li>Service life (points system) 4 of 4 points</li>
<li>Diameter (Ø) 10 mm</li>
<li>Length 455 mm</li>
<li>Working length 390 mm</li>
<li>Number of cutting edges 4 PCS</li>
<li>Tool holding device Suitable for SDS-plus</li>
</ul>

Wall Plugs, Anchors, Fixings & Kits

Engine Oil & Fluid

Safety Shoes

Pneumatic Hammers

Safety Gloves

Vehicle Accessories

Chisels

Hydraulic Jacks

Darius Ong

Wurth Hammer Drill Bit Plus QUADRO-L Vario D10,0-L455-WL390MM

wurth hammer drill bit plus quadro-l vario d10,0-l455-wl390mm mata bor palu bits sets set gerudi wurth/沃特 锤钻头 钻头和钻头套装 沃特

wurth-hammer-drill-bit-plus-quadro-l-vario-d10-0-l455-wl390mm

Proto 1/4'' Drive, 10mm Af Socket Impact Magnetic, Std 6 Pt, Steel Black, 15/16''L 6910MPF

ProtoGrip™ Magnetic Sockets use high-strength magnets made from a rare earth magnet alloy/nylon blend.

ProtoGrip™ Magnetic Sockets require no bushings to hold the magnet in place. Allows room for more magnet material, helping increase total magnetic strength.

Designed to easily pick up heavy fasteners and hold them tightly during use.

Strong magnetic hold helps increase efficiency when installing fasteners in awkward or hard-to-reach locations.

Power sockets with high surface hardness are used in high-speed assembly operations. Ideal for nut runners.

Socket size stamped on tool for easy identification.

<h3 class="md-block-header-three">Proto 1/4&#x27;&#x27; Drive, 10mm Af Socket Impact Magnetic, Std 6 Pt, Steel Black, 15/16&#x27;&#x27;L 6910MPF</h3><h2 class="md-block-header-two">Features and benefits</h2><ul class="md-block-unordered-list-item"><li>ProtoGrip™ Magnetic Sockets use high-strength magnets made from a rare earth magnet alloy/nylon blend.</li><li>ProtoGrip™ Magnetic Sockets require no bushings to hold the magnet in place. Allows room for more magnet material, helping increase total magnetic strength.</li><li>Designed to easily pick up heavy fasteners and hold them tightly during use.</li><li>Strong magnetic hold helps increase efficiency when installing fasteners in awkward or hard-to-reach locations.</li><li>Power sockets with high surface hardness are used in high-speed assembly operations. Ideal for nut runners.</li><li>Socket size stamped on tool for easy identification.</li><li>Side locking hole.</li></ul><h2 class="md-block-header-two">Specifications</h2><ul class="md-block-unordered-list-item"><li>SIZE [MM] : 10</li><li>NUT END OUTSIDE DIAMETER [IN] : 9/16</li><li>DRIVE END OUTSIDE DIAMETER [IN] : 9/16</li><li>NUT DEPTH [IN] : 7/32</li><li>OVERALL LENGTH [IN] : 15/16</li><li>WEIGHT [LBS] : 0.05</li><li>DRIVE SIZE [IN] : 1/4</li><li>POINT SIZE : 6</li><li>FINISH : Black Oxide</li><li>LENGTH TYPE : Standard</li><li>UNIT OF MEASURE : Metric</li><li>SPECIFICATION ASME : ASME B107.33</li></ul>

&nbsp;
<h3>Proto 1/4'' Drive, 10mm Af Socket Impact Magnetic, Std 6 Pt, Steel Black, 15/16''L 6910MPF</h3>
<h2>Features and benefits</h2>
<ul>
<li>ProtoGrip™ Magnetic Sockets use high-strength magnets made from a rare earth magnet alloy/nylon blend.</li>
<li>ProtoGrip™ Magnetic Sockets require no bushings to hold the magnet in place. Allows room for more magnet material, helping increase total magnetic strength.</li>
<li>Designed to easily pick up heavy fasteners and hold them tightly during use.</li>
<li>Strong magnetic hold helps increase efficiency when installing fasteners in awkward or hard-to-reach locations.</li>
<li>Power sockets with high surface hardness are used in high-speed assembly operations. Ideal for nut runners.</li>
<li>Socket size stamped on tool for easy identification.</li>
<li>Side locking hole.</li>
</ul>
<h2>Specifications</h2>
<ul>
<li>SIZE [MM] : 10</li>
<li>NUT END OUTSIDE DIAMETER [IN] : 9/16</li>
<li>DRIVE END OUTSIDE DIAMETER [IN] : 9/16</li>
<li>NUT DEPTH [IN] : 7/32</li>
<li>OVERALL LENGTH [IN] : 15/16</li>
<li>WEIGHT [LBS] : 0.05</li>
<li>DRIVE SIZE [IN] : 1/4</li>
<li>POINT SIZE : 6</li>
<li>FINISH : Black Oxide</li>
<li>LENGTH TYPE : Standard</li>
<li>UNIT OF MEASURE : Metric</li>
<li>SPECIFICATION ASME : ASME B107.33</li>
</ul>

Allen 

Fong Siew Sen

Facom

RIDGID TOOLS

Pelican

OptiMax

Others

PROTOOLS

Other Tools

Open End Spanners

Socket Sets

Ring Spanners

Screwdriver Bits & Bit Set

Torque Wrenches

Tap & Die Wrenches

ALLEN Chiang

proto 1/4'' drive, 10mm af socket impact magnetic, std pt, steel black, 15/16''l 6910mpf soket dampak magnetik, baja hitam, sockets pemacu 1/4'', magnetik kesan 10mm, keluli hentaman proto/原型 驱动器，10mm 插座冲击磁性，std pt，钢黑色，15/16''l 冲击插座 原型

proto-1-4-drive-10mm-af-socket-impact-magnetic-std-6-pt-steel-black-15-16-l-6910mpf

Wurth Hammer Drill Bit Plus QUADRO-L Vario D16,0-L210-WL160MM DRL-HAM-PLUS-Q-LV-D16,0-L210-WL160MM

The special self-centring tip enables high-precision spot drilling. 


<h3 class="md-block-header-three">Wurth Hammer Drill Bit Plus QUADRO-L Vario D16,0-L210-WL160MM DRL-HAM-PLUS-Q-LV-D16,0-L210-WL160MM</h3>The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcementSignificantly improved compatibility with reinforcementsThe symmetrical 4 x 90° cutting edge geometry (up to Ø 10 mm with solid carbide head) prevents the drill bit from hooking in or running off centre when striking e.g. reinforcements.Noticeably quicker drillingThe advanced tip geometry and asymmetrically placed elevations on the cutting edges ensure improved traction.Perfect drilling properties over the entire service life<ul class="md-block-unordered-list-item"><li>Head geometry that is tailored to the drill bit diameter</li><li>5–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability.</li><li>18–32 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces.</li></ul>Considerably improved drilling speed and dust removal while at the same time offering increased protection against breakageVario spiral conveyor with back that narrows at the front and widens at the rear, as well as sharper angle at the spiral end ensures reduced friction, high stability and maximum transmission of impact energy.Optimum guidance in drilled holeDrill bit with four cutting edges and four-spiral geometry to ensure that the bit is guided perfectly into the drilled hole.Precise spot drillingThe special self-centring tip enables high-precision spot drilling. <h3 class="md-block-header-three">Technical Information</h3><ul class="md-block-unordered-list-item"><li>Drilling speed (point system) 2 of 4 points</li><li>Smoothness of running (points system) 4 of 4 points</li><li>Accuracy (point system) 4 of 4 points</li><li>Reinforcement strength (points system) 4 of 4 points</li><li>Service life (points system) 4 of 4 points</li><li>Diameter (Ø) 16 mm</li><li>Length 210 mm</li><li>Working length 160 mm</li><li>Number of cutting edges 4 PCS</li><li>Tool holding device Suitable for SDS-plus</li></ul>

<h3>Wurth Hammer Drill Bit Plus QUADRO-L Vario D16,0-L210-WL160MM DRL-HAM-PLUS-Q-LV-D16,0-L210-WL160MM</h3>
The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement
Significantly improved compatibility with reinforcements
The symmetrical 4 x 90° cutting edge geometry (up to Ø 10 mm with solid carbide head) prevents the drill bit from hooking in or running off centre when striking e.g. reinforcements.
Noticeably quicker drilling
The advanced tip geometry and asymmetrically placed elevations on the cutting edges ensure improved traction.
Perfect drilling properties over the entire service life
<ul>
<li>Head geometry that is tailored to the drill bit diameter</li>
<li>5–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability.</li>
<li>18–32 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces.</li>
</ul>
Considerably improved drilling speed and dust removal while at the same time offering increased protection against breakage
Vario spiral conveyor with back that narrows at the front and widens at the rear, as well as sharper angle at the spiral end ensures reduced friction, high stability and maximum transmission of impact energy.
Optimum guidance in drilled hole
Drill bit with four cutting edges and four-spiral geometry to ensure that the bit is guided perfectly into the drilled hole.
Precise spot drilling
The special self-centring tip enables high-precision spot drilling. 

<h3>Technical Information</h3>
<ul>
<li>Drilling speed (point system) 2 of 4 points</li>
<li>Smoothness of running (points system) 4 of 4 points</li>
<li>Accuracy (point system) 4 of 4 points</li>
<li>Reinforcement strength (points system) 4 of 4 points</li>
<li>Service life (points system) 4 of 4 points</li>
<li>Diameter (Ø) 16 mm</li>
<li>Length 210 mm</li>
<li>Working length 160 mm</li>
<li>Number of cutting edges 4 PCS</li>
<li>Tool holding device Suitable for SDS-plus</li>
</ul>

Wurth Hammer Drill Bit Plus QUADRO-L Vario D16,0-L210-WL160MM

wurth hammer drill bit plus quadro-l vario d16,0-l210-wl160mm mata bor palu bits sets set gerudi wurth/沃特 锤钻头 钻头和钻头套装 沃特

wurth-hammer-drill-bit-plus-quadro-l-vario-d16-0-l210-wl160mm

Proto Wrench Combination Ratcheting Box 10mm Af Asd O/E 12 Points Rev Steel Chrome 6.1/4"L SCVM10T

12 point box end allows for fine indexing, helping to improve speed and access.

12 point box end fits 4, 6 and 12 point fasteners.

The wrench self aligns with the fastener.

Full polish finish provides corrosion resistance and easy to clean surfaces.

The box end is countersunk for easy application to the fastener.

15° angled offset helps keep shank clear of obstructions.

72 tooth ratcheting mechanism rotates fast with only 5 degrees of swing.

The chrome-vanadium switch lever allows for easy changes in turning direction which helps improve speed.

<h3 class="md-block-header-three">Proto Wrench Combination Ratcheting Box 10mm Af Asd O/E 12 Points Rev Steel Chrome 6.1/4&quot;L SCVM10T</h3><ul class="md-block-unordered-list-item"><li>12 point box end allows for fine indexing, helping to improve speed and access.</li><li>12 point box end fits 4, 6 and 12 point fasteners.</li><li>The wrench self aligns with the fastener.</li><li>Full polish finish provides corrosion resistance and easy to clean surfaces.</li><li>The box end is countersunk for easy application to the fastener.</li><li>15° angled offset helps keep shank clear of obstructions.</li><li>Anti-Slip Design (ASD) open end.</li><li>72 tooth ratcheting mechanism rotates fast with only 5 degrees of swing.</li><li>The chrome-vanadium switch lever allows for easy changes in turning direction which helps improve speed.</li><li>Box ends incorporate the TorquePlus™ system.</li></ul>SpecificationsFINISH Full PolishSIZE [MM]10OUTSIDE HEAD WIDTH 1 [IN]13/16HEAD THICKNESS 1 [IN]1/8OUTSIDE HEAD WIDTH 2 [IN]25/32HEAD THICKNESS 2 [IN]1/8OVERALL LENGTH [IN]6-1/4WEIGHT [LBS]0.11POINT SIZE 12UNIT OF MEASURE Metric

<h3>Proto Wrench Combination Ratcheting Box 10mm Af Asd O/E 12 Points Rev Steel Chrome 6.1/4"L SCVM10T</h3>
<ul>
<li>12 point box end allows for fine indexing, helping to improve speed and access.</li>
<li>12 point box end fits 4, 6 and 12 point fasteners.</li>
<li>The wrench self aligns with the fastener.</li>
<li>Full polish finish provides corrosion resistance and easy to clean surfaces.</li>
<li>The box end is countersunk for easy application to the fastener.</li>
<li>15° angled offset helps keep shank clear of obstructions.</li>
<li>Anti-Slip Design (ASD) open end.</li>
<li>72 tooth ratcheting mechanism rotates fast with only 5 degrees of swing.</li>
<li>The chrome-vanadium switch lever allows for easy changes in turning direction which helps improve speed.</li>
<li>Box ends incorporate the TorquePlus™ system.</li>
</ul>
Specifications
FINISH Full Polish
SIZE [MM]10
OUTSIDE HEAD WIDTH 1 [IN]13/16
HEAD THICKNESS 1 [IN]1/8
OUTSIDE HEAD WIDTH 2 [IN]25/32
HEAD THICKNESS 2 [IN]1/8
OVERALL LENGTH [IN]6-1/4
WEIGHT [LBS]0.11
POINT SIZE 12
UNIT OF MEASURE Metric 
&nbsp;

proto wrench combination ratcheting box 10mm af asd o/e 12 points rev steel chrome 6.1/4"l scvm10t kunci pas kombinasi poin spanners peti gabungan sepana mata proto/原型 扳手组合棘轮盒 组合扳手 原型