Avon

Nietz

Electricals

electricals

Electrical Tapes

electrical-tapes

Test & Measurement

test-measurement

Measuring Tapes

measuring-tapes

 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Green

 3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.

Primary electrical insulation for all wire and cable rated up to 600 volts.

Protective jacketing for cable splices and repairs.

Dielectric Strength (ASTM D-1000): 1000 V/mil

Breaking Strength (ASTM D-1000): 12 lbs/in

The tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.

<h3 class="md-block-header-three"> 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Green</h3> 3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.Colour: GreenApplications<ul class="md-block-unordered-list-item"><li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li><li>Protective jacketing for cable splices and repairs.</li><li>Harnessing of wires and cables.</li><li>For indoor and outdoor applications. </li></ul> Typical Data/Physical Properties <ul class="md-block-unordered-list-item"><li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li><li>Flammability (UL 510 Method): Pass</li><li>Thickness (ASTM D-1000): 5 mils</li><li>Elongation (ASTM D-1000): 150%</li><li>Breaking Strength (ASTM D-1000): 12 lbs/in</li><li>Adhesion (ASTM D-1000):</li><ul class="md-block-unordered-list-item"><li>To Steel: 14 oz/in</li><li>To Backing: 14 oz/in </li></ul></ul>Installation TechniqueThe tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.

<h3> 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Green</h3>
&nbsp;3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.
Colour: Green
Applications
<ul>
<li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li>
<li>Protective jacketing for cable splices and repairs.</li>
<li>Harnessing of wires and cables.</li>
<li>For indoor and outdoor applications.&nbsp;</li>
</ul>
&nbsp;Typical Data/Physical Properties&nbsp;
<ul>
<li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li>
<li>Flammability (UL 510 Method): Pass</li>
<li>Thickness (ASTM D-1000): 5 mils</li>
<li>Elongation (ASTM D-1000): 150%</li>
<li>Breaking Strength (ASTM D-1000): 12 lbs/in</li>
<li>Adhesion (ASTM D-1000):</li>
<ul>
<li>To Steel: 14 oz/in</li>
<li>To Backing: 14 oz/in&nbsp;</li>
</ul>
</ul>
Installation Technique
The tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.

Ms. Lim

3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Green

3m temflex 1500 electrical tape (18mm 5m 0.13mm) green pita listrik hijau tapes elektrik 电工胶带（18mm 0.13mm）绿色

3m-temflex-1500-electrical-tape-18mm-x-5m-x-0-13mm-green

3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Yellow (gu) 

3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.

Temflex 1500 Electrical Tape is stable under normal storage conditions.

<h3 class="md-block-header-three">3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Yellow (gu) </h3>3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.Applications<ul class="md-block-unordered-list-item"><li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li><li>Protective jacketing for cable splices and repairs.</li><li>Harnessing of wires and cables.</li><li>For indoor and outdoor applications. </li></ul>Installation TechniqueThe tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.MaintenanceTemflex 1500 Electrical Tape is stable under normal storage conditions. Test Method: Typical Value<ul class="md-block-unordered-list-item"><li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li><li>Flammability (UL 510 Method): Pass</li><li>Thickness (ASTM D-1000): 5 mils</li><li>Elongation (ASTM D-1000): 150%</li><li>Breaking Strength (ASTM D-1000): 12 lbs/in</li><li>Adhesion (ASTM D-1000):</li><ul class="md-block-unordered-list-item"><li>To Steel: 14 oz/in</li><li>To Backing: 14 oz/in</li></ul></ul>

<h3>3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Yellow (gu)&nbsp;</h3>
3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.
Applications
<ul>
<li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li>
<li>Protective jacketing for cable splices and repairs.</li>
<li>Harnessing of wires and cables.</li>
<li>For indoor and outdoor applications.&nbsp;</li>
</ul>
Installation Technique
The tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.
Maintenance
Temflex 1500 Electrical Tape is stable under normal storage conditions.
&nbsp;Test Method: Typical Value
<ul>
<li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li>
<li>Flammability (UL 510 Method): Pass</li>
<li>Thickness (ASTM D-1000): 5 mils</li>
<li>Elongation (ASTM D-1000): 150%</li>
<li>Breaking Strength (ASTM D-1000): 12 lbs/in</li>
<li>Adhesion (ASTM D-1000):</li>
<ul>
<li>To Steel: 14 oz/in</li>
<li>To Backing: 14 oz/in</li>
</ul>
</ul>

3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Yellow (gu)

3m temflex 1500 electrical tape (18mm 5m 0.13mm) yellow (gu) pita listrik kuning tapes elektrik 电工胶带 黄色

3m-temflex-1500-electrical-tape-18mm-x-5m-x-0-13mm-yellow-gu

 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Blue (gu)

<h3 class="md-block-header-three"> 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Blue (gu)</h3>3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.Applications<ul class="md-block-unordered-list-item"><li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li><li>Protective jacketing for cable splices and repairs.</li><li>Harnessing of wires and cables.</li><li>For indoor and outdoor applications. </li></ul>Installation TechniqueThe tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.MaintenanceTemflex 1500 Electrical Tape is stable under normal storage conditions.Test Method: Typical Value<ul class="md-block-unordered-list-item"><li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li><li>Flammability (UL 510 Method): Pass</li><li>Thickness (ASTM D-1000): 5 mils</li><li>Elongation (ASTM D-1000): 150%</li><li>Breaking Strength (ASTM D-1000): 12 lbs/in</li><li>Adhesion (ASTM D-1000):</li><ul class="md-block-unordered-list-item"><li>To Steel: 14 oz/in</li><li>To Backing: 14 oz/in</li></ul></ul>

<h3> 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Blue (gu)</h3>
3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.
Applications
<ul>
<li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li>
<li>Protective jacketing for cable splices and repairs.</li>
<li>Harnessing of wires and cables.</li>
<li>For indoor and outdoor applications.&nbsp;</li>
</ul>
Installation Technique
The tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.
Maintenance
Temflex 1500 Electrical Tape is stable under normal storage conditions.
Test Method: Typical Value
<ul>
<li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li>
<li>Flammability (UL 510 Method): Pass</li>
<li>Thickness (ASTM D-1000): 5 mils</li>
<li>Elongation (ASTM D-1000): 150%</li>
<li>Breaking Strength (ASTM D-1000): 12 lbs/in</li>
<li>Adhesion (ASTM D-1000):</li>
<ul>
<li>To Steel: 14 oz/in</li>
<li>To Backing: 14 oz/in</li>
</ul>
</ul>

3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Blue (gu)

3m temflex 1500 electrical tape (18mm 5m 0.13mm) (10rolls) blue (gu) pita listrik (10rol) biru tapes elektrik 电工胶带 (10卷) 蓝色

3m-temflex-1500-electrical-tape-18mm-x-5m-x-0-13mm-10rolls-blue-gu

3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Blue (gu) 

The tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging. 

<h3 class="md-block-header-three">3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Blue (gu) </h3> 3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.Colour: BlueApplications<ul class="md-block-unordered-list-item"><li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li><li>Protective jacketing for cable splices and repairs.</li><li>Harnessing of wires and cables.</li><li>For indoor and outdoor applications. </li></ul>Typical Data/Physical Properties <ul class="md-block-unordered-list-item"><li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li><li>Flammability (UL 510 Method): Pass</li><li>Thickness (ASTM D-1000): 5 mils</li><li>Elongation (ASTM D-1000): 150%</li><li>Breaking Strength (ASTM D-1000): 12 lbs/in</li><li>Adhesion (ASTM D-1000):</li><ul class="md-block-unordered-list-item"><li>To Steel: 14 oz/in</li><li>To Backing: 14 oz/in </li></ul></ul>Installation TechniqueThe tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.

<h3>3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Blue (gu)&nbsp;</h3>
&nbsp;3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.
Colour: Blue
Applications
<ul>
<li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li>
<li>Protective jacketing for cable splices and repairs.</li>
<li>Harnessing of wires and cables.</li>
<li>For indoor and outdoor applications.&nbsp;</li>
</ul>
Typical Data/Physical Properties&nbsp;
<ul>
<li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li>
<li>Flammability (UL 510 Method): Pass</li>
<li>Thickness (ASTM D-1000): 5 mils</li>
<li>Elongation (ASTM D-1000): 150%</li>
<li>Breaking Strength (ASTM D-1000): 12 lbs/in</li>
<li>Adhesion (ASTM D-1000):</li>
<ul>
<li>To Steel: 14 oz/in</li>
<li>To Backing: 14 oz/in&nbsp;</li>
</ul>
</ul>
Installation Technique
The tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.&nbsp;

3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) Blue (gu)

3m temflex 1500 electrical tape (18mm 5m 0.13mm) blue (gu) pita listrik biru tapes elektrik 电工胶带 蓝色

3m-temflex-1500-electrical-tape-18mm-x-5m-x-0-13mm-blue-gu

  3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Green

<h3 class="md-block-header-three"> 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Green</h3>3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.Applications<ul class="md-block-unordered-list-item"><li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li><li>Protective jacketing for cable splices and repairs.</li><li>Harnessing of wires and cables.</li><li>For indoor and outdoor applications.</li></ul>Installation TechniqueThe tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.MaintenanceTemflex 1500 Electrical Tape is stable under normal storage conditions. Test Method: Typical Value<ul class="md-block-unordered-list-item"><li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li><li>Flammability (UL 510 Method): Pass</li><li>Thickness (ASTM D-1000): 5 mils</li><li>Elongation (ASTM D-1000): 150%</li><li>Breaking Strength (ASTM D-1000): 12 lbs/in</li><li>Adhesion (ASTM D-1000):</li><ul class="md-block-unordered-list-item"><li>To Steel: 14 oz/in</li><li>To Backing: 14 oz/in</li></ul></ul>

<h3> 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Green</h3>
3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.
Applications
<ul>
<li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li>
<li>Protective jacketing for cable splices and repairs.</li>
<li>Harnessing of wires and cables.</li>
<li>For indoor and outdoor applications.</li>
</ul>
Installation Technique
The tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.
Maintenance
Temflex 1500 Electrical Tape is stable under normal storage conditions.
&nbsp;&nbsp;Test Method: Typical Value
<ul>
<li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li>
<li>Flammability (UL 510 Method): Pass</li>
<li>Thickness (ASTM D-1000): 5 mils</li>
<li>Elongation (ASTM D-1000): 150%</li>
<li>Breaking Strength (ASTM D-1000): 12 lbs/in</li>
<li>Adhesion (ASTM D-1000):</li>
<ul>
<li>To Steel: 14 oz/in</li>
<li>To Backing: 14 oz/in</li>
</ul>
</ul>

3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Green

3m temflex 1500 electrical tape (18mm 5m 0.13mm) (10rolls) green pita listrik (10rol) hijau tapes elektrik 电工胶带 (10卷) 绿色

3m-temflex-1500-electrical-tape-18mm-x-5m-x-0-13mm-10rolls-green

 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Yellow (gu)

<h3 class="md-block-header-three"> 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Yellow (gu)</h3>3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.Applications<ul class="md-block-unordered-list-item"><li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li><li>Protective jacketing for cable splices and repairs.</li><li>Harnessing of wires and cables.</li><li>For indoor and outdoor applications.</li></ul>Installation TechniqueThe tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.MaintenanceTemflex 1500 Electrical Tape is stable under normal storage conditions. Test Method: Typical Value<ul class="md-block-unordered-list-item"><li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li><li>Flammability (UL 510 Method): Pass</li><li>Thickness (ASTM D-1000): 5 mils</li><li>Elongation (ASTM D-1000): 150%</li><li>Breaking Strength (ASTM D-1000): 12 lbs/in</li><li>Adhesion (ASTM D-1000):</li><ul class="md-block-unordered-list-item"><li>To Steel: 14 oz/in</li><li>To Backing: 14 oz/in</li></ul></ul>

<h3> 3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Yellow (gu)</h3>
3M™ Temflex 1500 Vinyl Electrical Tape is a good quality and economical general use vinyl insulating tape. It is resistant to abrasion, moisture, alkalis, acid and varying weather conditions. It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and provides mechanical protection with minimum bulk.
Applications
<ul>
<li>Primary electrical insulation for all wire and cable rated up to 600 volts.</li>
<li>Protective jacketing for cable splices and repairs.</li>
<li>Harnessing of wires and cables.</li>
<li>For indoor and outdoor applications.</li>
</ul>
Installation Technique
The tape shall be appllied in half-lapped layers with sufficient tension to conform and produce a uniform covering. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging.
Maintenance
Temflex 1500 Electrical Tape is stable under normal storage conditions.
&nbsp;&nbsp;&nbsp;Test Method: Typical Value
<ul>
<li>Dielectric Strength (ASTM D-1000): 1000 V/mil</li>
<li>Flammability (UL 510 Method): Pass</li>
<li>Thickness (ASTM D-1000): 5 mils</li>
<li>Elongation (ASTM D-1000): 150%</li>
<li>Breaking Strength (ASTM D-1000): 12 lbs/in</li>
<li>Adhesion (ASTM D-1000):</li>
<ul>
<li>To Steel: 14 oz/in</li>
<li>To Backing: 14 oz/in</li>
</ul>
</ul>

3M Temflex 1500 Electrical Tape (18MM X 5M X 0.13MM) (10Rolls) Yellow (gu)

3m temflex 1500 electrical tape (18mm 5m 0.13mm) (10rolls) yellow (gu) pita listrik (10rol) kuning tapes elektrik 电工胶带 (18 毫米 0.13 毫米) (10 卷) 黄色

3m-temflex-1500-electrical-tape-18mm-x-5m-x-0-13mm-10rolls-yellow-gu

3M 1710 Vinyl Electrical Tape 18MM X 10Meter (Blue/Green/Black/Red/ Yellow) 

1710 Vinyl Electrical Tape is a good quality and economical general purpose vinyl insulating tape. It has excellent resistance to: abrasion, moisture, alkalies, acid and varying weather conditions (including sunlight). It is a polyvinyl chloride (PVC) tape that has a high wet dielectric strength, is conformable, and provides excellent mechanical protection with minimum bulk. It is a UL listed and CSA Certified “Insulating Tape”.

Primary electrical insulation for all wire and cable splices rated up to 600 volts.

Protective jacketing for high voltage cable splices and repairs.

<h3 class="md-block-header-three">3M 1710 Vinyl Electrical Tape 18MM X 10Meter (Blue/Green/Black/Red/ Yellow) </h3>1710 Vinyl Electrical Tape is a good quality and economical general purpose vinyl insulating tape. It has excellent resistance to: abrasion, moisture, alkalies, acid and varying weather conditions (including sunlight). It is a polyvinyl chloride (PVC) tape that has a high wet dielectric strength, is conformable, and provides excellent mechanical protection with minimum bulk. It is a UL listed and CSA Certified “Insulating Tape”.Applications<ul class="md-block-unordered-list-item"><li>Primary electrical insulation for all wire and cable splices rated up to 600 volts.</li><li>Protective jacketing for high voltage cable splices and repairs.</li><li>Harnessing of wires and cables.</li><li>For indoor and outdoor applications.</li><li>For above or below grade applications.</li></ul>Spesification:<ul class="md-block-unordered-list-item"><li>Size: 18MM X 10Meter </li></ul>

<h3>3M 1710 Vinyl Electrical Tape 18MM X 10Meter (Blue/Green/Black/Red/ Yellow)&nbsp;</h3>
1710 Vinyl Electrical Tape is a good quality and economical general purpose vinyl insulating tape. It has excellent resistance to: abrasion, moisture, alkalies, acid and varying weather conditions (including sunlight). It is a polyvinyl chloride (PVC) tape that has a high wet dielectric strength, is conformable, and provides excellent mechanical protection with minimum bulk. It is a UL listed and CSA Certified “Insulating Tape”.
Applications
<ul>
<li>Primary electrical insulation for all wire and cable splices rated up to 600 volts.</li>
<li>Protective jacketing for high voltage cable splices and repairs.</li>
<li>Harnessing of wires and cables.</li>
<li>For indoor and outdoor applications.</li>
<li>For above or below grade applications.</li>
</ul>
Spesification:
<ul>
<li>Size: 18MM X 10Meter&nbsp;</li>
</ul>

3M 1710 Vinyl Electrical Tape 18MM X 10Meter (Blue/Green/Black/Red/ Yellow)

3m 1710 vinyl electrical tape 18mm 10meter (blue/green/black/red/ yellow) pita listrik (biru/hijau/hitam/merah/kuning) tapes elektrik 乙烯基电工胶带 18 毫米 10 米（蓝色/绿色/黑色/红色/黄色）

3m-1710-vinyl-electrical-tape-18mm-x-10meter-blue-green-black-red-yellow

Blue

Green

Black

Yellow

Colour

Allen-Bradley

Kennedy

SCHNEIDER ELECTRIC

Panduit

FLUKE

Exoweld

Festo

Weidmuller

Sherwood

Monitoring Relays

Drill Bits & Drill Bit Sets

Power Supply

Circuit Breaker

Contactors

Cable Protectors

Power Relay

Electrical Power Testing

KVC ETH

buyerIntroduction

3M XE001105859 1710 Vinyl Electrical Tape 18MM X 10M Green

3m xe001105859 1710 vinyl electrical tape 18mm 10m green pita listrik hijau tapes elektrik vinil 乙烯基电工胶带 绿色

3m-xe001105859-1710-vinyl-electrical-tape-18mm-x-10m-green

3M XE001100629 1710 Vinyl Electrical Tape 38MM X 10M Black

3m xe001100629 1710 vinyl electrical tape 38mm 10m black pita listrik hitam tapes elektrik vinil 乙烯基电工胶带 黑色

3m-xe001100629-1710-vinyl-electrical-tape-38mm-x-10m-black

3M XE001105842 1710 Vinyl Electrical Tape 18MM X 10M Blue

3m xe001105842 1710 vinyl electrical tape 18mm 10m blue pita listrik biru tapes elektrik vinil 乙烯基电工胶带 蓝色

3m-xe001105842-1710-vinyl-electrical-tape-18mm-x-10m-blue

3M XE001105867 1710 Vinyl Electrical Tape 18MM X 10M Yellow

3m xe001105867 1710 vinyl electrical tape 18mm 10m yellow pita listrik kuning tapes elektrik 乙烯基电工胶带 黄色

3m-xe001105867-1710-vinyl-electrical-tape-18mm-x-10m-yellow

3M XE001105834 1710 Vinyl Electrical Tape 18MM X 10M Red

3m xe001105834 1710 vinyl electrical tape 18mm 10m red pita listrik merah tapes elektrik vinil 乙烯基电工胶带 红色

3m-xe001105834-1710-vinyl-electrical-tape-18mm-x-10m-red

3M 24 Scotch Electrical Shielding Tape (1″ X 15′) 

Scotch® 24 Electrical Shielding Tape is an all-metal, open-weave, shielding braid tape in a flat, cable-like form. It is conformable due to the open-weave knit construction of two No. 36 AWG tinned copper wires.

Elongates easily to conform to inclined or uneven surfaces.

Compatible with all high-voltage splicing and termination materials

Unaffected by solvents, U.V., ozone, and moisture

Because of its construction, the tape interlocks with the previous layer, thereby assuring a tighter wrap (no solder bead is required)

The porosity of Scotch 24 Tape will permit complete resin saturation when splicing

Usable for indoor and outdoor applications

To provide shielding for cable joints on shielded power cables

To make the conductive portion of the stress cone on power cable terminations

To smooth connector area in oil-filled cables 

Breaking Strength (ASTM-D-1000-76): 22 lbs./in.

Weather Resistance (Stretched and Unstretched): Pass

Electrical Resistance (3M) (ASTM D-1373-67): Pass

Wire Size: Two No. 36 AWG tinned copper wires

<h3 class="md-block-header-three">3M 24 Scotch Electrical Shielding Tape (1″ X 15′) </h3>Scotch® 24 Electrical Shielding Tape is an all-metal, open-weave, shielding braid tape in a flat, cable-like form. It is conformable due to the open-weave knit construction of two No. 36 AWG tinned copper wires.Features:<ul class="md-block-unordered-list-item"><li>Tinned copper conductors</li><li>Stable at elevated temperatures</li><li>Oil Resistant</li><li>Compatible with power cable insulations</li><li>Fire resistant</li><li>Elongates easily to conform to inclined or uneven surfaces.</li><li>Corrosion resistant</li><li>Compatible with all high-voltage splicing and termination materials</li><li>Unaffected by solvents, U.V., ozone, and moisture</li><li>Because of its construction, the tape interlocks with the previous layer, thereby assuring a tighter wrap (no solder bead is required)</li><li>The porosity of Scotch 24 Tape will permit complete resin saturation when splicing</li><li>Usable for indoor and outdoor applications</li><li>Size:1″ X 15′</li></ul>Applications<ul class="md-block-unordered-list-item"><li>To provide shielding for cable joints on shielded power cables</li><li>To make the conductive portion of the stress cone on power cable terminations</li><li>To smooth connector area in oil-filled cables </li></ul>Physical Properties<ul class="md-block-unordered-list-item"><li>Thickness (ASTM-D-1000-76): 0.016</li><li>Breaking Strength (ASTM-D-1000-76): 22 lbs./in.</li><li>Elongation (ASTM-D-1000-76): 70%</li><li>Weather Resistance (Stretched and Unstretched): Pass</li><li>Shelf Life: Indefinite</li></ul>Electrical Properties<ul class="md-block-unordered-list-item"><li>Electrical Resistance (3M) (ASTM D-1373-67): Pass</li><li>Wire Size: Two No. 36 AWG tinned copper wires</li></ul>Chemical Properties<ul class="md-block-unordered-list-item"><li>Ozone Resistant (ASTM D-1373-67): Pass</li><li>Water Absorption: Zero</li></ul>

<h3>3M 24 Scotch Electrical Shielding Tape (1″ X 15′)&nbsp;</h3>
Scotch® 24 Electrical Shielding Tape is an all-metal, open-weave, shielding braid tape in a flat, cable-like form. It is conformable due to the open-weave knit construction of two No. 36 AWG tinned copper wires.
Features:
<ul>
<li>Tinned copper conductors</li>
<li>Stable at elevated temperatures</li>
<li>Oil Resistant</li>
<li>Compatible with power cable insulations</li>
<li>Fire resistant</li>
<li>Elongates easily to conform to inclined or uneven surfaces.</li>
<li>Corrosion resistant</li>
<li>Compatible with all high-voltage splicing and termination materials</li>
<li>Unaffected by solvents, U.V., ozone, and moisture</li>
<li>Because of its construction, the tape interlocks with the previous layer, thereby assuring a tighter wrap (no solder bead is required)</li>
<li>The porosity of Scotch 24 Tape will permit complete resin saturation when splicing</li>
<li>Usable for indoor and outdoor applications</li>
<li>Size:1″ X 15′</li>
</ul>
Applications
<ul>
<li>To provide shielding for cable joints on shielded power cables</li>
<li>To make the conductive portion of the stress cone on power cable terminations</li>
<li>To smooth connector area in oil-filled cables&nbsp;</li>
</ul>
Physical Properties
<ul>
<li>Thickness (ASTM-D-1000-76): 0.016</li>
<li>Breaking Strength (ASTM-D-1000-76): 22 lbs./in.</li>
<li>Elongation (ASTM-D-1000-76): 70%</li>
<li>Weather Resistance (Stretched and Unstretched): Pass</li>
<li>Shelf Life: Indefinite</li>
</ul>
Electrical Properties
<ul>
<li>Electrical Resistance (3M) (ASTM D-1373-67): Pass</li>
<li>Wire Size: Two No. 36 AWG tinned copper wires</li>
</ul>
Chemical Properties
<ul>
<li>Ozone Resistant (ASTM D-1373-67): Pass</li>
<li>Water Absorption: Zero</li>
</ul>

3M 24 Scotch Electrical Shielding Tape (1″ X 15′)

3m 24 scotch electrical shielding tape (1″ 15′) pita pelindung listrik tapes perisai elektrik 电气屏蔽胶带

3m-24-scotch-electrical-shielding-tape-1-x-15

Nietz Fiberglass Measure Tape 100m 548-19-100

<h3 class="md-block-header-three">Nietz Fiberglass Measure Tape 100m 548-19-100</h3><ul class="md-block-unordered-list-item"><li>Weight : 1500 Gram</li><li> Fiberglass tape</li><li>Type : FIBERGLASS MEASURING TAPE</li><li>Size : 100M</li><li>Material : Fiberglass</li><li>Weight : 1,46 kg</li><li>Dimension : 420 x 315 x 45 mm </li></ul>

<h3>Nietz Fiberglass Measure Tape 100m 548-19-100</h3>
<ul>
<li>Weight : 1500 Gram</li>
<li>&nbsp;Fiberglass tape</li>
<li>Type : FIBERGLASS MEASURING TAPE</li>
<li>Size : 100M</li>
<li>Material : Fiberglass</li>
<li>Weight : 1,46 kg</li>
<li>Dimension : 420 x 315 x 45 mm&nbsp;</li>
</ul>

Picasaf

STANLEY

BOSCH

CELONI

Buick

Strongman

SOBAR

Combination Spanners

Other Tools

Safety Shoes

Ring Spanners

Safety Helmet

Open End Spanners

Torque Wrenches

Clamps

Fall Protection

Ropes & Chains

Darius Ong 

nietz fiberglass measure tape 100m 548-19-100 pita pengukur measuring tapes gentian kaca nietz/尼茨 玻璃纤维卷尺 尼茨

nietz-fiberglass-measure-tape-100m-548-19-100

3M 35 Scotch Vinyl Electrical Tape (10Rolls)3/4" X 66' (orange)

 Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). 

UL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.

Color coding for phase identification, job identification and safety

Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather

Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.

On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.

Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.

<h3 class="md-block-header-three">3M 35 Scotch Vinyl Electrical Tape (10Rolls)3/4&quot; X 66&#x27; (orange)</h3> Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). Agency Approvals &amp; Self CertificationsUL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.Applications<ul class="md-block-unordered-list-item"><li>Color coding for phase identification, job identification and safety</li><li>Insulating electrical wiring</li><li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li></ul>Installation<ul class="md-block-unordered-list-item"><li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li><li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li><li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Size: 3/4&quot; X 66&#x27; </li><li>Colour: Orange</li><li>Pack of 10 rolls</li></ul>

<h3>3M 35 Scotch Vinyl Electrical Tape (10Rolls)3/4" X 66' (orange)</h3>
&nbsp;Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C).&nbsp;
Agency Approvals &amp; Self Certifications
UL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.
Applications
<ul>
<li>Color coding for phase identification, job identification and safety</li>
<li>Insulating electrical wiring</li>
<li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li>
</ul>
Installation
<ul>
<li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li>
<li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li>
<li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li>
</ul>
Specifications
<ul>
<li>Size: 3/4" X 66'&nbsp;</li>
<li>Colour: Orange</li>
<li>Pack of 10 rolls</li>
</ul>

3m 35 scotch vinyl electrical tape (10rolls)3/4" 66' (orange) pita listrik vinil (10 gulungan) 3/4" (oranye) tapes elektrik (oren) 乙烯基电工胶带（10 卷）3/4 英寸 66 英尺（橙色）

3m-35-scotch-vinyl-electrical-tape-10rolls-3-4-x-66-orange

3M 35 Scotch Vinyl Electrical Tape 3/4" X 66' (red)

Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). This tape is available in nine fade resistant colors.

<h3 class="md-block-header-three">3M 35 Scotch Vinyl Electrical Tape 3/4&quot; X 66&#x27; (red)</h3>Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). This tape is available in nine fade resistant colors.Agency Approvals &amp; Self CertificationsUL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.Applications<ul class="md-block-unordered-list-item"><li>Color coding for phase identification, job identification and safety</li><li>Insulating electrical wiring</li><li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li></ul>Installation<ul class="md-block-unordered-list-item"><li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li><li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li><li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Size: 3/4&quot; X 66&#x27; </li><li>Colour: Red</li></ul>

<h3>3M 35 Scotch Vinyl Electrical Tape 3/4" X 66' (red)</h3>
Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). This tape is available in nine fade resistant colors.
Agency Approvals &amp; Self Certifications
UL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.
Applications
<ul>
<li>Color coding for phase identification, job identification and safety</li>
<li>Insulating electrical wiring</li>
<li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li>
</ul>
Installation
<ul>
<li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li>
<li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li>
<li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li>
</ul>
Specifications
<ul>
<li>Size: 3/4" X 66'&nbsp;</li>
<li>Colour: Red</li>
</ul>

3m 35 scotch vinyl electrical tape 3/4" 66' (red) pita listrik (merah) tapes elektrik 乙烯基电工胶带 3/4 英寸 66 英尺（红色）

3m-35-scotch-vinyl-electrical-tape-3-4-x-66-red

3M 35 Scotch Vinyl Electrical Tape 3/4" X 66' (grey)

<h3 class="md-block-header-three">3M 35 Scotch Vinyl Electrical Tape 3/4&quot; X 66&#x27; (grey)</h3> Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). Agency Approvals &amp; Self CertificationsUL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.Applications<ul class="md-block-unordered-list-item"><li>Color coding for phase identification, job identification and safety</li><li>Insulating electrical wiring</li><li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li></ul>Installation<ul class="md-block-unordered-list-item"><li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li><li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li><li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Size: 3/4&quot; X 66&#x27; </li><li>Colour: Grey</li></ul>

<h3>3M 35 Scotch Vinyl Electrical Tape 3/4" X 66' (grey)</h3>
&nbsp;Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C).&nbsp;
Agency Approvals &amp; Self Certifications
UL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.
Applications
<ul>
<li>Color coding for phase identification, job identification and safety</li>
<li>Insulating electrical wiring</li>
<li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li>
</ul>
Installation
<ul>
<li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li>
<li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li>
<li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li>
</ul>
Specifications
<ul>
<li>Size: 3/4" X 66'&nbsp;</li>
<li>Colour: Grey</li>
</ul>

3m 35 scotch vinyl electrical tape 3/4" 66' (grey) pita listrik (abu-abu) tapes elektrik (kelabu) 乙烯基电工胶带 3/4 英寸 66 英尺（灰色）

3m-35-scotch-vinyl-electrical-tape-3-4-x-66-grey

3M 35 Scotch Vinyl Electrical Tape (10Rolls)3/4" X 66' (brown)

<h3 class="md-block-header-three">3M 35 Scotch Vinyl Electrical Tape (10Rolls)3/4&quot; X 66&#x27; (brown)</h3> Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). Agency Approvals &amp; Self CertificationsUL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.Applications<ul class="md-block-unordered-list-item"><li>Color coding for phase identification, job identification and safety</li><li>Insulating electrical wiring</li><li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li></ul>Installation<ul class="md-block-unordered-list-item"><li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li><li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li><li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Size: 3/4&quot; X 66&#x27; </li><li>Colour: Brown</li><li>Pack of 10 rolls</li></ul>

<h3>3M 35 Scotch Vinyl Electrical Tape (10Rolls)3/4" X 66' (brown)</h3>
&nbsp;Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C).&nbsp;
Agency Approvals &amp; Self Certifications
UL Listed – UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR 48769.RoHS 2002/95/EC RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.
Applications
<ul>
<li>Color coding for phase identification, job identification and safety</li>
<li>Insulating electrical wiring</li>
<li>Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather</li>
</ul>
Installation
<ul>
<li>Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.</li>
<li>On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.</li>
<li>Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.</li>
</ul>
Specifications
<ul>
<li>Size: 3/4" X 66'&nbsp;</li>
<li>Colour: Brown</li>
<li>Pack of 10 rolls</li>
</ul>

3m 35 scotch vinyl electrical tape (10rolls)3/4" 66' (brown) pita listrik vinil (10 gulungan) 3/4" (coklat) tapes elektrik 乙烯基电工胶带 卷)3/4 英寸 66 英尺 (棕色)

3m-35-scotch-vinyl-electrical-tape-10rolls-3-4-x-66-brown

Kennedy-Pro

Fabory

Qualfast

SWISS+TECH

YORK

Halo

Atlas Workholders

Yamoto

Screw

Sockets

Threading Taps

Impact Sockets

Swivel Castors

Files

Hex Keys & Sets

Screwdrivers

Pneumatic Quick Connect Couplings

Cromwell ETH 

Avon AVN9867500K 19mm X 33m (pack of 10) - Orange Pvc Insulation Tape

avon avn9867500k 19mm 33m (pack 10) orange pvc insulation tape (pak isi pita isolasi oranye electrical tapes (pek penebat jingga 33m（10 件装）- 橙色 绝缘胶带 雅芳

avon-avn9867500k-19mm-x-33m-pack-of-10-orange-pvc-insulation-tape

3M 130C Rubber Splicing Tape Scotch Linerless (3/4″ X 30′) (19MM X 9Meter)

Scotch® Linerless Rubber Splicing Tape 130C is a highly conformable, linerless, ethylene rubber (EPR), high-voltage insulating tape, formulated to provide excellent thermal dissipation of splice heat. The tape is designed for use in splicing and terminating wires and cables. Rated up to 90°C continuous operating temperatures and short-term 130°C overload service. The tape has excellent physical and electrical properties, which provide immediate moisture seals and void-free build-ups. This product can be used for low and high-voltage (through 69 kV) applications.

Linerless, self-bonding, primary insulating tape rated through 69 kV

Excellent physical and electrical properties

Designed to insulate splices and terminate cables whose overload temperatures can reach 130°C

<h3 class="md-block-header-three">3M 130C Rubber Splicing Tape Scotch Linerless (3/4″ X 30′) (19MM X 9Meter)</h3>Scotch® Linerless Rubber Splicing Tape 130C is a highly conformable, linerless, ethylene rubber (EPR), high-voltage insulating tape, formulated to provide excellent thermal dissipation of splice heat. The tape is designed for use in splicing and terminating wires and cables. Rated up to 90°C continuous operating temperatures and short-term 130°C overload service. The tape has excellent physical and electrical properties, which provide immediate moisture seals and void-free build-ups. This product can be used for low and high-voltage (through 69 kV) applications.Features<ul class="md-block-unordered-list-item"><li>Linerless, self-bonding, primary insulating tape rated through 69 kV</li><li>High thermal conductivity</li><li>Ethylene propylene base</li><li>Excellent physical and electrical properties</li><li>Designed to insulate splices and terminate cables whose overload temperatures can reach 130°C</li><li>Physical and electrical properties unaffected by degree of stretch</li><li>Compatible with common, solid dielectric cable insulation</li><li>Uniform tape unwind from roll</li><li>Small roll size (O.D.)Five-year shelf life</li><li>Stable over wide application temperature range</li><li>Weather resistant</li></ul>Applications<ul class="md-block-unordered-list-item"><li>Primary insulation for splicing all types of solid dielectric insulated cables through 69 kV</li><li>Primary insulation for building stress cones on all types of solid dielectric insulated cables up to 35 kV bus bar insulation</li><li>Jacketing (secondary insulation) on high-voltage splices and terminations</li><li>Moisture-sealing electrical connections</li><li>Bus bar insulation</li><li>End-sealing high-voltage cables</li><li>Motor leads</li><li>Jacket repairs </li></ul>SpecificationsThe high-voltage corona resistant tape must be supplied without a liner, be based on ethylene propylene rubber, and be capable of emergency operating cable temperature of 130°C. The tape must be capable of being applied in either stretched or unstretched conditions without resulting in loss of either physical or electrical properties. The tape must not split, crack, slip, or flag when exposed to various environments (indoor or outdoor). The tape must be compatible with all synthetic cable insulations and have a shelf life of five years.

<h3>3M 130C Rubber Splicing Tape Scotch Linerless (3/4″ X 30′) (19MM X 9Meter)</h3>
Scotch® Linerless Rubber Splicing Tape 130C is a highly conformable, linerless, ethylene rubber (EPR), high-voltage insulating tape, formulated to provide excellent thermal dissipation of splice heat. The tape is designed for use in splicing and terminating wires and cables. Rated up to 90°C continuous operating temperatures and short-term 130°C overload service. The tape has excellent physical and electrical properties, which provide immediate moisture seals and void-free build-ups. This product can be used for low and high-voltage (through 69 kV) applications.
Features
<ul>
<li>Linerless, self-bonding, primary insulating tape rated through 69 kV</li>
<li>High thermal conductivity</li>
<li>Ethylene propylene base</li>
<li>Excellent physical and electrical properties</li>
<li>Designed to insulate splices and terminate cables whose overload temperatures can reach 130°C</li>
<li>Physical and electrical properties unaffected by degree of stretch</li>
<li>Compatible with common, solid dielectric cable insulation</li>
<li>Uniform tape unwind from roll</li>
<li>Small roll size (O.D.)Five-year shelf life</li>
<li>Stable over wide application temperature range</li>
<li>Weather resistant</li>
</ul>
Applications
<ul>
<li>Primary insulation for splicing all types of solid dielectric insulated cables through 69 kV</li>
<li>Primary insulation for building stress cones on all types of solid dielectric insulated cables up to 35 kV bus bar insulation</li>
<li>Jacketing (secondary insulation) on high-voltage splices and terminations</li>
<li>Moisture-sealing electrical connections</li>
<li>Bus bar insulation</li>
<li>End-sealing high-voltage cables</li>
<li>Motor leads</li>
<li>Jacket repairs&nbsp;</li>
</ul>
Specifications
The high-voltage corona resistant tape must be supplied without a liner, be based on ethylene propylene rubber, and be capable of emergency operating cable temperature of 130°C. The tape must be capable of being applied in either stretched or unstretched conditions without resulting in loss of either physical or electrical properties. The tape must not split, crack, slip, or flag when exposed to various environments (indoor or outdoor). The tape must be compatible with all synthetic cable insulations and have a shelf life of five years.

3m 130c rubber splicing tape scotch linerless (3/4″ 30′) (19mm 9meter) pita penyambung karet electrical tapes getah tanpa pelapik 橡胶拼接胶带 无衬里 (3/4 英寸 30 英尺) (19 毫米 米)