MEGGER

Test & Measurement

test-measurement

Distance Measurement

distance-measurement

Electrical Power Testing

electrical-power-testing

Insulation Testers

insulation-testers

Meteorological Instrumentation & Equipment

meteorological-instrumentation-equipment

Multimeters

multimeters

Other Measuring Tools

other-measuring-tools

 The MFT1701 series is a range of 4 instruments for testing low voltage electrical installations to BS7671. They provide all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations, For MFT1711 includes: 

Continuity: 200mA test suitable for R1+R2 and R2 testing with adjustable buzzer threshold

Insulation resistance: 250, 500 and 1000V tests

Loop: 2 and 3 wire test options featuring a patented anti-trip on both 2 and 3 wire test options. PSCC/PFC are tandem displayed with the loop test result.

RCD: Ramp, manual (0.5x, 1x, 5x) or automatically test 10, 30, 100, 300 and 500mA AC, A, S and programmable RCDs

TRMS Voltage: accurately measure supply voltage and frequency

AC battery charger (MFT1731 and MFT1741 only)

<h3 class="md-block-header-three">Megger Multifunction Tester MFT1711 </h3> The MFT1701 series is a range of 4 instruments for testing low voltage electrical installations to BS7671. They provide all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations, For MFT1711 includes: <ul class="md-block-unordered-list-item"><li>Continuity: 200mA test suitable for R1+R2 and R2 testing with adjustable buzzer threshold</li><li>Insulation resistance: 250, 500 and 1000V tests</li><li>Loop: 2 and 3 wire test options featuring a patented anti-trip on both 2 and 3 wire test options. PSCC/PFC are tandem displayed with the loop test result.</li><li>RCD: Ramp, manual (0.5x, 1x, 5x) or automatically test 10, 30, 100, 300 and 500mA AC, A, S and programmable RCDs</li><li>TRMS Voltage: accurately measure supply voltage and frequency</li></ul>Includes :<ul class="md-block-unordered-list-item"><li>Printed quick start guide </li><li>Full user guide on CD </li><li>Calibration certificate </li><li>Neck strap - Megger embroidered</li><li>3 Wire lead set with prods and clips</li><li>Mains plug test lead (BS1363) </li><li>AC battery charger (MFT1731 and MFT1741 only)</li></ul>

<h3>Megger Multifunction Tester MFT1711&nbsp;</h3>
&nbsp;The MFT1701 series is a range of 4 instruments for testing low voltage electrical installations to BS7671. They provide all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations, For MFT1711 includes:&nbsp;
<ul>
<li>Continuity: 200mA test suitable for R1+R2 and R2 testing with adjustable buzzer threshold</li>
<li>Insulation resistance: 250, 500 and 1000V tests</li>
<li>Loop: 2 and 3 wire test options featuring a patented anti-trip on both 2 and 3 wire test options. PSCC/PFC are tandem displayed with the loop test result.</li>
<li>RCD: Ramp, manual (0.5x, 1x, 5x) or automatically test 10, 30, 100, 300 and 500mA AC, A, S and programmable RCDs</li>
<li>TRMS Voltage: accurately measure supply voltage and frequency</li>
</ul>
Includes :
<ul>
<li>Printed quick start guide&nbsp;</li>
<li>Full user guide on CD&nbsp;</li>
<li>Calibration certificate&nbsp;</li>
<li>Neck strap - Megger embroidered</li>
<li>3 Wire lead set with prods and clips</li>
<li>Mains plug test lead (BS1363)&nbsp;</li>
<li>AC battery charger (MFT1731 and MFT1741 only)</li>
</ul>

FLUKE

PCE Instruments

Onset

TRIPLETT

EXTECH INSTRUMENTS

ACISION

KYORITSU

Center

Tormin

Temperature Data Logger

Humidity & Temperature

Industrial Thermometer

Sound & Vibration Meters

Air Quality Meters

Flow & PH Meters

Bryan 

buyerIntroduction

Megger MFT1711 Multifunction Installation Testers

megger mft1711 multifunction installation testers penguji instalasi multifungsi multimeters multimeter pemasangan pelbagai fungsi megger/麦格 多功能安装测试仪 万用表 麦格

megger-mft1711-multifunction-installation-testers

 The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. This model comes with Bluetooth download.  

 Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.

A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.

Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.

Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.

The range consists of four instruments:
MIT400/2 250 V, 500 V and 1000 V
MIT410/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio
MIT420/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and result storage
MIT430/2 50 V, 100 V, 250 V, 500 V and 1000 V +Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and Bluetooth download

Insulation testing up to 1000 V and 200 GΩ range

Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)

User variable insulation test voltage from 100V to 1000V (New) depending on model

Test result storage and Bluetooth® downloading depending on model

Rechargeable options for mains and car charging (New)depending on model

Red/Black Silicone test leads with Probes + Clips 

The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. This model comes with Bluetooth download.  Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.The range consists of four instruments: MIT400/2 250 V, 500 V and 1000 V MIT410/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio MIT420/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and result storage MIT430/2 50 V, 100 V, 250 V, 500 V and 1000 V +Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and Bluetooth download<h3 class="md-block-header-three">Applications</h3><ul class="md-block-unordered-list-item"><li>Construction sites</li><li>Renewable energy production</li><li>Assembly lines </li></ul><h3 class="md-block-header-three">Key Features</h3><ul class="md-block-unordered-list-item"><li>Insulation testing up to 1000 V and 200 GΩ range</li><li>Stabilised insulation test voltage (New)</li><li>Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)</li><li>600 V Trms AC and DC voltage measurement</li><li>Live circuit detection and protection</li><li>User variable insulation test voltage from 100V to 1000V (New) depending on model</li><li>Test result storage and Bluetooth® downloading depending on model</li><li>Rechargeable options for mains and car charging (New)depending on model</li><li>CAT IV 600 V &amp; IP54</li></ul><h3 class="md-block-header-three">Includes : </h3><ul class="md-block-unordered-list-item"><li>Red/Black Silicone test leads with Probes + Clips </li><li>SP5 remote switch probe (not MIT400/2) </li><li>Owners information CD </li><li>Batteries 6 x AA </li><li>Alkaline Hard carry case</li></ul>

&nbsp;The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. This model comes with Bluetooth download. &nbsp;
&nbsp;Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.
A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.
Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.
Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.
The range consists of four instruments: 
MIT400/2 250 V, 500 V and 1000 V 
MIT410/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio 
MIT420/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and result storage 
MIT430/2 50 V, 100 V, 250 V, 500 V and 1000 V +Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and Bluetooth download
<h3>Applications</h3>
<ul>
<li>Construction sites</li>
<li>Renewable energy production</li>
<li>Assembly lines&nbsp;</li>
</ul>
<h3>Key Features</h3>
<ul>
<li>Insulation testing up to 1000 V and 200 GΩ range</li>
<li>Stabilised insulation test voltage (New)</li>
<li>Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)</li>
<li>600 V Trms AC and DC voltage measurement</li>
<li>Live circuit detection and protection</li>
<li>User variable insulation test voltage from 100V to 1000V (New) depending on model</li>
<li>Test result storage and Bluetooth® downloading depending on model</li>
<li>Rechargeable options for mains and car charging (New)depending on model</li>
<li>CAT IV 600 V &amp; IP54</li>
</ul>
<h3>Includes : </h3>
<ul>
<li>Red/Black Silicone test leads with Probes + Clips&nbsp;</li>
<li>SP5 remote switch probe (not MIT400/2)&nbsp;</li>
<li>Owners information CD&nbsp;</li>
<li>Batteries 6 x AA&nbsp;</li>
<li>Alkaline Hard carry case</li>
</ul>

Megger 430/2 Series Cat Iv Insulation Testers With Bluetooth

megger 430/2 series cat iv insulation testers bluetooth penguji insulasi seri dengan penebat siri megger/麦格 系列 绝缘测试仪（带蓝牙） 麦格

megger-430-2-series-cat-iv-insulation-testers-with-bluetooth

Megger  Insulation and Continuity Tester MIT420/2 

MIT420/2-LG2 (EN ES PT IT) Insulation and Continuity Tester 50/100/250/500/1000V 600 V CAT IV PI And DAR, variable voltage, storage/recall with Language Group LG2 - English, Spanish, Portuguese and Italian

MIT420/2 - 50 V, 100 V, 250 V, 500 V, 1000 V insulation tester + PI and DAR + CAT IV 600 V + storage and recall

Single range, faster continuity testing from 0.01 O to 1 MO (New)

User variable insulation test voltage from 100V to 1000V (depending on model)

Test result storage and Bluetooth® downloading, (depending on model)

Rechargeable options for mains and car charging (depending on model)

<h3 class="md-block-header-three">Megger Insulation and Continuity Tester MIT420/2 </h3>MIT420/2-LG2 (EN ES PT IT) Insulation and Continuity Tester 50/100/250/500/1000V 600 V CAT IV PI And DAR, variable voltage, storage/recall with Language Group LG2 - English, Spanish, Portuguese and Italian<ul class="md-block-unordered-list-item"><li>MIT420/2 - 50 V, 100 V, 250 V, 500 V, 1000 V insulation tester + PI and DAR + CAT IV 600 V + storage and recall</li><li>Stabilized insulation test voltage (New)</li><li>Single range, faster continuity testing from 0.01 O to 1 MO (New)</li><li>600 V Trms AC and DC voltage measurement</li><li>Live circuit detection and protection</li><li>User variable insulation test voltage from 100V to 1000V (depending on model)</li><li>Test result storage and Bluetooth® downloading, (depending on model)</li><li>Rechargeable options for mains and car charging (depending on model)</li><li>CAT IV 600 V &amp; IP54</li></ul>Includes : <ul class="md-block-unordered-list-item"><li>Red/Black Silicone test leads with Probes + Clips </li><li>SP5 remote switch probe </li><li>Batteries 6 x AA Alkaline </li><li>Hard carry case </li><li>Calibration certificate </li></ul>

<h3>Megger Insulation and Continuity Tester MIT420/2&nbsp;</h3>
MIT420/2-LG2 (EN ES PT IT) Insulation and Continuity Tester 50/100/250/500/1000V 600 V CAT IV PI And DAR, variable voltage, storage/recall with Language Group LG2 - English, Spanish, Portuguese and Italian
<ul>
<li>MIT420/2 - 50 V, 100 V, 250 V, 500 V, 1000 V insulation tester + PI and DAR + CAT IV 600 V + storage and recall</li>
<li>Stabilized insulation test voltage (New)</li>
<li>Single range, faster continuity testing from 0.01 O to 1 MO (New)</li>
<li>600 V Trms AC and DC voltage measurement</li>
<li>Live circuit detection and protection</li>
<li>User variable insulation test voltage from 100V to 1000V (depending on model)</li>
<li>Test result storage and Bluetooth® downloading, (depending on model)</li>
<li>Rechargeable options for mains and car charging (depending on model)</li>
<li>CAT IV 600 V &amp; IP54</li>
</ul>
Includes : 
<ul>
<li>Red/Black Silicone test leads with Probes + Clips&nbsp;</li>
<li>SP5 remote switch probe&nbsp;</li>
<li>Batteries 6 x AA Alkaline&nbsp;</li>
<li>Hard carry case&nbsp;</li>
<li>Calibration certificate&nbsp;</li>
</ul>

Megger Insulation and Continuity Tester MIT420/2

megger insulation continuity tester mit420/2 penguji isolasi dan kontinuitas electrical power testing pengujian daya listrik penebat kesinambungan ujian tenaga elektrik megger/麦格 兆欧表绝缘和连续性测试仪 电力测试 麦格

megger-insulation-and-continuity-tester-mit420-2

DETEX Phasing Testers are available in two models for applications up to 34.5-kV class systems. These models have LED indication.

The Phasing Tester (Cat. No. 510836-1) provides bright LED indication for easy visibility indoors or where lighting conditions are poor. Approximate voltage ranges to be checked can be preset for additional assurance. The instrument consists of a pair of fixed-length, 43-in. (1092-mm) poles with hand guards. A flexible, insulated connecting cable is capable of covering a 7-ft (2.1-m) span between two energized phases under test.

This two-pole phasing tester may be used on grounded and ungrounded ac systems to check high-voltage fuses, test for correct phase connections and test for the absence of high voltage on de-energized lines or apparatus.

Used on grounded or ungrounded ac systems to check high-voltage fuses, test for correct phase connections and test for the absence of high voltage on de-energized lines or apparatus.

Two models available for up to 34.5 kV class systems.

DETEX Phasing Testers are available in two models for applications up to 34.5-kV class systems. These models have LED indication.The Phasing Tester (Cat. No. 510836-1) provides bright LED indication for easy visibility indoors or where lighting conditions are poor. Approximate voltage ranges to be checked can be preset for additional assurance. The instrument consists of a pair of fixed-length, 43-in. (1092-mm) poles with hand guards. A flexible, insulated connecting cable is capable of covering a 7-ft (2.1-m) span between two energized phases under test.This two-pole phasing tester may be used on grounded and ungrounded ac systems to check high-voltage fuses, test for correct phase connections and test for the absence of high voltage on de-energized lines or apparatus.Key Features : <ul class="md-block-unordered-list-item"><li>Used on grounded or ungrounded ac systems to check high-voltage fuses, test for correct phase connections and test for the absence of high voltage on de-energized lines or apparatus.</li><li>Two models available for up to 34.5 kV class systems.</li></ul>Includes :<ul class="md-block-unordered-list-item"><li>Carrying case for 510836-1</li><li>Instruction manual</li></ul>

DETEX Phasing Testers are available in two models for applications up to 34.5-kV class systems. These models have LED indication.
The Phasing Tester (Cat. No. 510836-1) provides bright LED indication for easy visibility indoors or where lighting conditions are poor. Approximate voltage ranges to be checked can be preset for additional assurance. The instrument consists of a pair of fixed-length, 43-in. (1092-mm) poles with hand guards. A flexible, insulated connecting cable is capable of covering a 7-ft (2.1-m) span between two energized phases under test.
This two-pole phasing tester may be used on grounded and ungrounded ac systems to check high-voltage fuses, test for correct phase connections and test for the absence of high voltage on de-energized lines or apparatus.
Key Features : 
<ul>
<li>Used on grounded or ungrounded ac systems to check high-voltage fuses, test for correct phase connections and test for the absence of high voltage on de-energized lines or apparatus.</li>
<li>Two models available for up to 34.5 kV class systems.</li>
</ul>
Includes :
<ul>
<li>Carrying case for 510836-1</li>
<li>Instruction manual</li>
</ul>

Megger 4-35KV Led Phasing Tester W/POLE

megger 4-35kv led phasing tester w/pole penguji pentahapan dengan tiang electrical power testing pengujian daya listrik phase ujian tenaga elektrik megger/麦格 相位测试仪 电力测试 麦格

megger-4-35kv-led-phasing-tester-w-pole

Optimal incident angle and positioning of solar panels

Measurement of solar power for panel short circuit calculation

33/4 digit LCD display with 1999 W/m2 range

Standard camera mount fixing for accurate placement

The Megger PVM210 provides the solar / photovoltaic engineer a compact, pocket size instrument that is easy to use.

Single handed operation is possible because the solar detector and meter being housed in one neat unit. This feature is ideal when using the instrument on a sloping roof or at the top of a ladder.

<h3 class="md-block-header-three">Megger Irradiance Meter PVM210 </h3><ul class="md-block-unordered-list-item"><li>Optimal incident angle and positioning of solar panels</li><li>Measurement of solar power for panel short circuit calculation</li><li>33/4 digit LCD display with 1999 W/m2 range</li><li>Single handed use</li><li>Mini pocket size</li><li>Standard camera mount fixing for accurate placement</li></ul>The Megger PVM210 provides the solar / photovoltaic engineer a compact, pocket size instrument that is easy to use.Single handed operation is possible because the solar detector and meter being housed in one neat unit. This feature is ideal when using the instrument on a sloping roof or at the top of a ladder.Includes : <ul class="md-block-unordered-list-item"><li>Batteries Pouch </li><li>Calibration certificate </li></ul>

<h3>Megger Irradiance Meter PVM210&nbsp;</h3>
<ul>
<li>Optimal incident angle and positioning of solar panels</li>
<li>Measurement of solar power for panel short circuit calculation</li>
<li>33/4 digit LCD display with 1999 W/m2 range</li>
<li>Single handed use</li>
<li>Mini pocket size</li>
<li>Standard camera mount fixing for accurate placement</li>
</ul>
The Megger PVM210 provides the solar / photovoltaic engineer a compact, pocket size instrument that is easy to use.
Single handed operation is possible because the solar detector and meter being housed in one neat unit. This feature is ideal when using the instrument on a sloping roof or at the top of a ladder.
Includes :&nbsp;
<ul>
<li>Batteries Pouch&nbsp;</li>
<li>Calibration certificate&nbsp;</li>
</ul>

Megger Irradiance Meter PVM210

megger irradiance meter pvm210 pengukur radiasi measuring tools alat ukur lainnya sinaran lain megger/麦格 兆欧表辐照度计 其他量具用品 麦格

megger-irradiance-meter-pvm210

The BITE5 is a battery tester that will test lead acid batteries, NiCD batteries as well as lithium-ion batteries. The BITE5 will measure and record battery voltage, impedance, and temperature. The BITE5 also supports discharge testing. It will measure the voltage and current throughout the discharge cycle. The BITE5 can also measure the impedance and temperature throughout the discharge cycle. 

Tests lead acid (VLA and VRLA), NiCD, and lithium-ion

Measures cell voltages throughout discharge

Measure cell temperature throughout discharge

Measure cell impedance throughout discharge

Measure solar combiner boxes up to 1000 V DC

Measure DC side of inverters up to 1000 V DC

Measure AC side of inverter up to 600 V AC

Solar combiner box measurements up to 1000 V DC

Lithium-ion battery testing up to 200 V DC

Duplex probes (With temperature probe) 90037-555

The BITE5 is a battery tester that will test lead acid batteries, NiCD batteries as well as lithium-ion batteries. The BITE5 will measure and record battery voltage, impedance, and temperature. The BITE5 also supports discharge testing. It will measure the voltage and current throughout the discharge cycle. The BITE5 can also measure the impedance and temperature throughout the discharge cycle. Key Features : <ul class="md-block-unordered-list-item"><li>Tests lead acid (VLA and VRLA), NiCD, and lithium-ion</li><ul class="md-block-unordered-list-item"><li>Measures cell impedance</li><li>Cell voltage</li><li>Cell temperature</li><li>Cell voltage ripple</li><li>AC current (ripple)</li><li>DC current (float)</li></ul><li>Supports discharge testing</li><ul class="md-block-unordered-list-item"><li>Measures cell voltages throughout discharge</li><li>Measure cell temperature throughout discharge</li><li>Measure cell impedance throughout discharge</li><li>Measure DC current throughout discharge</li></ul><li>Measure string voltages up to 1000 V DC</li><li>Measure solar combiner boxes up to 1000 V DC</li><li>Measure DC side of inverters up to 1000 V DC</li><li>Measure AC side of inverter up to 600 V AC</li><li>Wirelessly transfer data to PowerDB</li></ul>Application :<ul class="md-block-unordered-list-item"><li>Battery impedance testing</li><li>Battery discharge testing</li><li>Solar combiner box measurements up to 1000 V DC</li><li>Lithium-ion battery testing up to 200 V DC</li></ul>Includes :<ul class="md-block-unordered-list-item"><li>Duplex probes (With temperature probe) 90037-555</li><li>Voltage test teads 90037-576</li><li>Charger 90039-077</li><li>Neck strap 90037-529</li><li>Zero bar 90037-575</li><li>16G Micro SD Card 90037-572</li><li>Micro SD Card USB reader 90037-571</li><li>USB cable 90037-569</li><li>Stylus 90037-570</li><li>Carry bag 90037-573</li><li>Pouch bag 90037-574</li></ul>

The BITE5 is a battery tester that will test lead acid batteries, NiCD batteries as well as lithium-ion batteries. The BITE5 will measure and record battery voltage, impedance, and temperature. The BITE5 also supports discharge testing. It will measure the voltage and current throughout the discharge cycle. The BITE5 can also measure the impedance and temperature throughout the discharge cycle.&nbsp;
Key Features :&nbsp;
<ul>
<li>Tests lead acid (VLA and VRLA), NiCD, and lithium-ion</li>
<ul>
<li>Measures cell impedance</li>
<li>Cell voltage</li>
<li>Cell temperature</li>
<li>Cell voltage ripple</li>
<li>AC current (ripple)</li>
<li>DC current (float)</li>
</ul>
<li>Supports discharge testing</li>
<ul>
<li>Measures cell voltages throughout discharge</li>
<li>Measure cell temperature throughout discharge</li>
<li>Measure cell impedance throughout discharge</li>
<li>Measure DC current throughout discharge</li>
</ul>
<li>Measure string voltages up to 1000 V DC</li>
<li>Measure solar combiner boxes up to 1000 V DC</li>
<li>Measure DC side of inverters up to 1000 V DC</li>
<li>Measure AC side of inverter up to 600 V AC</li>
<li>Wirelessly transfer data to PowerDB</li>
</ul>
Application :
<ul>
<li>Battery impedance testing</li>
<li>Battery discharge testing</li>
<li>Solar combiner box measurements up to 1000 V DC</li>
<li>Lithium-ion battery testing up to 200 V DC</li>
</ul>
Includes :
<ul>
<li>Duplex probes (With temperature probe) 90037-555</li>
<li>Voltage test teads 90037-576</li>
<li>Charger 90039-077</li>
<li>Neck strap 90037-529</li>
<li>Zero bar 90037-575</li>
<li>16G Micro SD Card 90037-572</li>
<li>Micro SD Card USB reader 90037-571</li>
<li>USB cable 90037-569</li>
<li>Stylus 90037-570</li>
<li>Carry bag 90037-573</li>
<li>Pouch bag 90037-574</li>
</ul>

Megger BITE5 Battery Tester

megger bite5 battery tester penguji baterai electrical power testing pengujian daya listrik bateri ujian tenaga elektrik megger/麦格 兆格bite5电池测试仪 电力测试 麦格

megger-bite5-battery-tester

The new Megger LTW325 Loop Impedance Tester is a time saving loop tester that eliminates the risk of incorrect connections. It uses two wire earth loop testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The dependable two wire testing of the LTW325 is a major benefit in applications where the neutral is missing or inaccessible, such as light switches and systems with 110V centre-tapped supplies. This loop impedance tester provides all of the facilities necessary for two wire, non-trip loop testing on all supplies between 50V and 440V AC. As with all of the LTW300 series, the two wire loop testing solution is guaranteed not to trip 30mA RCDs.

The 2 wire non-tripping earth loop testers verify the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. The new LTW300 series instruments offer a 2 wire loop testing solution that does not trip 30 mA RCDs and can be used on a wide range of voltages.

The new LTW300’s offer a range of features to make earth loop testing safer and easier.

LTW315 – 2 Wire loop impedance measurement

LTW335 – 2 wire + maxZ + (R1+R2) + Download

Guaranteed not to trip working RCDs of up to 30mA.

Three phase circuits with RCD protection can also be tested.

Sophisticated noise detection circuitry that monitors supply to ensure accuracy.

Additional 10 secs is required if electrical noise is detected that could affect results.

High current test used for supplies with no RCD.

Auto-start function will start loop test running as soon as leads are connected.

Enables testing on 110V centre tapped supplies.

Test results are displayed to a resolution of 0.01Ω.

Three-phase safe and Category IV 300V rated

The new Megger LTW325 Loop Impedance Tester is a time saving loop tester that eliminates the risk of incorrect connections. It uses two wire earth loop testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The dependable two wire testing of the LTW325 is a major benefit in applications where the neutral is missing or inaccessible, such as light switches and systems with 110V centre-tapped supplies. This loop impedance tester provides all of the facilities necessary for two wire, non-trip loop testing on all supplies between 50V and 440V AC. As with all of the LTW300 series, the two wire loop testing solution is guaranteed not to trip 30mA RCDs.The 2 wire non-tripping earth loop testers verify the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. The new LTW300 series instruments offer a 2 wire loop testing solution that does not trip 30 mA RCDs and can be used on a wide range of voltages.The new LTW300’s offer a range of features to make earth loop testing safer and easier.The range consists of:<ul class="md-block-unordered-list-item"><li>LTW315 – 2 Wire loop impedance measurement</li><li>LTW325 – 2 wire + maxZ + (R1+R2)</li><li>LTW335 – 2 wire + maxZ + (R1+R2) + Download</li></ul>Key Features: <ul class="md-block-unordered-list-item"><li>Two wire loop impedance measurement.</li><li>Phase to Earth testing.</li><li>Phase to Neutral testing.</li><li>Guaranteed not to trip working RCDs of up to 30mA.</li><li>Three phase circuits with RCD protection can also be tested.</li><li>Test runs for approx. 10 secs.</li><li>Sophisticated noise detection circuitry that monitors supply to ensure accuracy.</li><li>Additional 10 secs is required if electrical noise is detected that could affect results.</li><li>High current test used for supplies with no RCD.</li><li>Auto-start function will start loop test running as soon as leads are connected.</li><li>Enables testing on 110V centre tapped supplies.</li><li>Frequency measurement.</li><li>PFC calculation up to 20KA.</li><li>Test results are displayed to a resolution of 0.01Ω.</li><li>Backlit display.</li><li>Three-phase safe and Category IV 300V rated</li></ul>

The new Megger LTW325 Loop Impedance Tester is a time saving loop tester that eliminates the risk of incorrect connections. It uses two wire earth loop testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The dependable two wire testing of the LTW325 is a major benefit in applications where the neutral is missing or inaccessible, such as light switches and systems with 110V centre-tapped supplies. This loop impedance tester provides all of the facilities necessary for two wire, non-trip loop testing on all supplies between 50V and 440V AC. As with all of the LTW300 series, the two wire loop testing solution is guaranteed not to trip 30mA RCDs.
The 2 wire non-tripping earth loop testers verify the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. The new LTW300 series instruments offer a 2 wire loop testing solution that does not trip 30 mA RCDs and can be used on a wide range of voltages.
The new LTW300’s offer a range of features to make earth loop testing safer and easier.
The range consists of:
<ul>
<li>LTW315 – 2 Wire loop impedance measurement</li>
<li>LTW325 – 2 wire + maxZ + (R1+R2)</li>
<li>LTW335 – 2 wire + maxZ + (R1+R2) + Download</li>
</ul>
Key Features: 
<ul>
<li>Two wire loop impedance measurement.</li>
<li>Phase to Earth testing.</li>
<li>Phase to Neutral testing.</li>
<li>Guaranteed not to trip working RCDs of up to 30mA.</li>
<li>Three phase circuits with RCD protection can also be tested.</li>
<li>Test runs for approx. 10 secs.</li>
<li>Sophisticated noise detection circuitry that monitors supply to ensure accuracy.</li>
<li>Additional 10 secs is required if electrical noise is detected that could affect results.</li>
<li>High current test used for supplies with no RCD.</li>
<li>Auto-start function will start loop test running as soon as leads are connected.</li>
<li>Enables testing on 110V centre tapped supplies.</li>
<li>Frequency measurement.</li>
<li>PFC calculation up to 20KA.</li>
<li>Test results are displayed to a resolution of 0.01Ω.</li>
<li>Backlit display.</li>
<li>Three-phase safe and Category IV 300V rated</li>
</ul>

Megger LTW325 Loop Impedance Tester

megger ltw325 loop impedance tester penguji impedansi lingkaran electrical power testing pengujian daya listrik impedans gelung ujian tenaga elektrik megger/麦格 回路阻抗测试仪 电力测试 麦格

megger-ltw325-loop-impedance-tester

Megger's DET4TD2 is an enhanced earth loop tester that is capable of perform 2, 3 and 4 point testing with selectable 25V or 50V output.

Suitable for use both indoors and outdoors thanks to IP54 rating (protection from dust and water jets) the Megger DET4TD2 is easy to connect up, and tests are easily chosen and initiated by use of the large rotary dial and test button. There's also a button built into the front of the instrument for switching between 25 and 50V modes.

This earth tester will also automatically evaluate and display the connection and condition of any connected P and C spikes, showcasing the results on the built-in LCD screen. You can also use the DET4TD2 to get an accurate measurement of ground voltage thanks to a built in voltmeter, and this instrument is also able to measure earth voltages up 100V, as well as resistance measurements from 0.01Ω to 20kΩ (with resistance accuracy of 2%±3 digits).

The Megger DET4TD2 is a non-rechargeable instrument and runs on 8 x AA batteries. Its sister tester, the DET4TR2, is rechargeable.

This product complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs, provided a leadset with this rating is used. The DET4TD2 is also in compliance with KEMA K85B and EN61557 "Electrical safety in low voltage distribution systems up to 1000V a.c and 1500V d.c - Equipment for testing measuring or monitoring of protective measures".

2, 3 and 4 wire testing with no shorting links required

Instrument output voltage of ±25V or ±50V at 128Hz

Instrument current output at 4.5mA or 0.45mA

Right Angle Terminal Adaptors (to connect bare wires to terminals)

<h3 class="md-block-header-three">Megger Earth Tester DET4TD2 </h3>Megger&#x27;s DET4TD2 is an enhanced earth loop tester that is capable of perform 2, 3 and 4 point testing with selectable 25V or 50V output.Suitable for use both indoors and outdoors thanks to IP54 rating (protection from dust and water jets) the Megger DET4TD2 is easy to connect up, and tests are easily chosen and initiated by use of the large rotary dial and test button. There&#x27;s also a button built into the front of the instrument for switching between 25 and 50V modes.This earth tester will also automatically evaluate and display the connection and condition of any connected P and C spikes, showcasing the results on the built-in LCD screen. You can also use the DET4TD2 to get an accurate measurement of ground voltage thanks to a built in voltmeter, and this instrument is also able to measure earth voltages up 100V, as well as resistance measurements from 0.01Ω to 20kΩ (with resistance accuracy of 2%±3 digits).The Megger DET4TD2 is a non-rechargeable instrument and runs on 8 x AA batteries. Its sister tester, the DET4TR2, is rechargeable.This product complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs, provided a leadset with this rating is used. The DET4TD2 is also in compliance with KEMA K85B and EN61557 &quot;Electrical safety in low voltage distribution systems up to 1000V a.c and 1500V d.c - Equipment for testing measuring or monitoring of protective measures&quot;.<h2 class="md-block-header-two">Megger DET4TD2 Key Features</h2><ul class="md-block-unordered-list-item"><li>2, 3 and 4 wire testing with no shorting links required</li><li>IP54 ingress protection</li><li>C spike, p stake and noise checks</li><li>Noise rejection 40V peak to peak</li><li>Instrument output voltage of ±25V or ±50V at 128Hz</li><li>Instrument current output at 4.5mA or 0.45mA</li><li>Resistance range of 0.01 to 20kΩ</li><li>Earth voltage range of 0-100V</li><li>LCD display</li><li>Easy to use</li><li>Runs on 8 x AA batteries</li></ul><h2 class="md-block-header-two">Full List of Products Included</h2><ul class="md-block-unordered-list-item"><li>Megger DET4TD2 Earth Tester</li><li>Hard Carry Case</li><li>Stake and Wire Kit (15m, 10m and 3m)</li><li>Right Angle Terminal Adaptors (to connect bare wires to terminals)</li><li>Calibration Certificate</li><li>Batteries</li></ul>

<h3>Megger Earth Tester DET4TD2&nbsp;</h3>
Megger's DET4TD2 is an enhanced earth loop tester that is capable of perform 2, 3 and 4 point testing with selectable 25V or 50V output.
Suitable for use both indoors and outdoors thanks to IP54 rating (protection from dust and water jets) the Megger DET4TD2 is easy to connect up, and tests are easily chosen and initiated by use of the large rotary dial and test button. There's also a button built into the front of the instrument for switching between 25 and 50V modes.
This earth tester will also automatically evaluate and display the connection and condition of any connected P and C spikes, showcasing the results on the built-in LCD screen. You can also use the DET4TD2 to get an accurate measurement of ground voltage thanks to a built in voltmeter, and this instrument is also able to measure earth voltages up 100V, as well as resistance measurements from 0.01Ω to 20kΩ (with resistance accuracy of 2%±3 digits).
The Megger DET4TD2 is a non-rechargeable instrument and runs on 8 x AA batteries. Its sister tester, the DET4TR2, is rechargeable.
This product complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs, provided a leadset with this rating is used. The DET4TD2 is also in compliance with KEMA K85B and EN61557 "Electrical safety in low voltage distribution systems up to 1000V a.c and 1500V d.c - Equipment for testing measuring or monitoring of protective measures".
<h2>Megger DET4TD2 Key Features</h2>
<ul>
<li>2, 3 and 4 wire testing with no shorting links required</li>
<li>IP54 ingress protection</li>
<li>C spike, p stake and noise checks</li>
<li>Noise rejection 40V peak to peak</li>
<li>Instrument output voltage of ±25V or ±50V at 128Hz</li>
<li>Instrument current output at 4.5mA or 0.45mA</li>
<li>Resistance range of 0.01 to 20kΩ</li>
<li>Earth voltage range of 0-100V</li>
<li>LCD display</li>
<li>Easy to use</li>
<li>Runs on 8 x AA batteries</li>
</ul>
<h2>Full List of Products Included</h2>
<ul>
<li>Megger DET4TD2 Earth Tester</li>
<li>Hard Carry Case</li>
<li>Stake and Wire Kit (15m, 10m and 3m)</li>
<li>Right Angle Terminal Adaptors (to connect bare wires to terminals)</li>
<li>Calibration Certificate</li>
<li>Batteries</li>
</ul>

Megger DET4TD2 4-Terminal Earth Resistance and Soil Resistivity Testers

megger det4td2 4-terminal earth resistance soil resistivity testers dan tester meteorological instrumentation equipment instrumentasi peralatan meteorologi rintangan bumi penguji tanah instrumen kelengkapan meteorlogi megger/麦格 端子接地电阻和土壤电阻率测试仪 气象仪器与设备 麦格

megger-det4td2-4-terminal-earth-resistance-and-soil-resistivity-testers

Megger Hazardous Area Ac Voltage Detector VF6 EX  

Hazardous area (Ex) rated for use on gas platforms and other petrochemical environments, the Megger VF6 Ex Hazardous Area AC Voltage Detector is a non-contact voltage tester capable of identifying AC voltages between 12V and 1000V. It has two voltage ranges: Low (12-1000V AC) and Medium (100V – 1000V AC). A bright-red LED, audible alarm, and vibration warning alert the user when an AC voltage has been detected. The Megger VF6 Ex Hazardous Area AC Voltage Detector also features an integrated LED torch and is housed in a durable, rubber, over-moulded casing with a screw-on battery cover. It has a CAT IV 1000V safety rating and an ingress protection rating of IP67.

The Megger VF6 Ex Hazardous Area AC Voltage Detector is a rugged and reliable AC voltage indicator suitable for detecting AC voltages at socket outlets, switches, circuit breakers, fuses, cables, and luminaires. It can also identify live conductors, find a break in a conductor, and verify a blown fuse in a circuit.

Megger VF6 Ex Hazardous Area AC Voltage Detector Key Features

Hazardous area (Ex) rated for use on gas platforms and other petrochemical environments

Detect AC voltages at socket outlets, switches, circuit breakers, fuses, cables, and luminaires

A rugged and reliable AC voltage indicator

<h3 class="md-block-header-three">Megger Hazardous Area Ac Voltage Detector VF6 EX </h3>Hazardous area (Ex) rated for use on gas platforms and other petrochemical environments, the Megger VF6 Ex Hazardous Area AC Voltage Detector is a non-contact voltage tester capable of identifying AC voltages between 12V and 1000V. It has two voltage ranges: Low (12-1000V AC) and Medium (100V – 1000V AC). A bright-red LED, audible alarm, and vibration warning alert the user when an AC voltage has been detected. The Megger VF6 Ex Hazardous Area AC Voltage Detector also features an integrated LED torch and is housed in a durable, rubber, over-moulded casing with a screw-on battery cover. It has a CAT IV 1000V safety rating and an ingress protection rating of IP67.The Megger VF6 Ex Hazardous Area AC Voltage Detector is a rugged and reliable AC voltage indicator suitable for detecting AC voltages at socket outlets, switches, circuit breakers, fuses, cables, and luminaires. It can also identify live conductors, find a break in a conductor, and verify a blown fuse in a circuit.<h2 class="md-block-header-two">Megger VF6 Ex Hazardous Area AC Voltage Detector Key Features</h2><ul class="md-block-unordered-list-item"><li>A non-contact AC voltage detector</li><li>Hazardous area (Ex) rated for use on gas platforms and other petrochemical environments</li><li>Range: 12V to 1000V AC</li><li>Low Voltage range: 12-1000V AC</li><li>Medium Voltage range: 100V-1000V AC</li><li>Bright red LED alert</li><li>Audible alert</li><li>Vibration alert</li><li>Integrated LED torch</li><li>Durable, rubber, over-moulded casing</li><li>Screw-on battery cover</li><li>Safety rating: CAT IV 1000V</li><li>IP67</li><li>Detect AC voltages at socket outlets, switches, circuit breakers, fuses, cables, and luminaires</li><li>Identify live conductors</li><li>Find a break in a conductor</li><li>Verify a blown fuse in a circuit</li><li>A rugged and reliable AC voltage indicator</li></ul>Includes :<ul class="md-block-unordered-list-item"><li>Batteries 2 x AAA</li></ul>

<h3>Megger Hazardous Area Ac Voltage Detector VF6 EX &nbsp;</h3>
Hazardous area (Ex) rated for use on gas platforms and other petrochemical environments, the Megger VF6 Ex Hazardous Area AC Voltage Detector is a non-contact voltage tester capable of identifying AC voltages between 12V and 1000V. It has two voltage ranges: Low (12-1000V AC) and Medium (100V – 1000V AC). A bright-red LED, audible alarm, and vibration warning alert the user when an AC voltage has been detected. The Megger VF6 Ex Hazardous Area AC Voltage Detector also features an integrated LED torch and is housed in a durable, rubber, over-moulded casing with a screw-on battery cover. It has a CAT IV 1000V safety rating and an ingress protection rating of IP67.
The Megger VF6 Ex Hazardous Area AC Voltage Detector is a rugged and reliable AC voltage indicator suitable for detecting AC voltages at socket outlets, switches, circuit breakers, fuses, cables, and luminaires. It can also identify live conductors, find a break in a conductor, and verify a blown fuse in a circuit.
<h2>Megger VF6 Ex Hazardous Area AC Voltage Detector Key Features</h2>
<ul>
<li>A non-contact AC voltage detector</li>
<li>Hazardous area (Ex) rated for use on gas platforms and other petrochemical environments</li>
<li>Range: 12V to 1000V AC</li>
<li>Low Voltage range: 12-1000V AC</li>
<li>Medium Voltage range: 100V-1000V AC</li>
<li>Bright red LED alert</li>
<li>Audible alert</li>
<li>Vibration alert</li>
<li>Integrated LED torch</li>
<li>Durable, rubber, over-moulded casing</li>
<li>Screw-on battery cover</li>
<li>Safety rating: CAT IV 1000V</li>
<li>IP67</li>
<li>Detect AC voltages at socket outlets, switches, circuit breakers, fuses, cables, and luminaires</li>
<li>Identify live conductors</li>
<li>Find a break in a conductor</li>
<li>Verify a blown fuse in a circuit</li>
<li>A rugged and reliable AC voltage indicator</li>
</ul>
Includes :
<ul>
<li>Batteries 2 x AAA</li>
</ul>

Megger VF6 EX Voltage Detector

megger vf6 ex voltage detector detektor tegangan electrical power testing pengujian daya listrik pengesan voltan ujian tenaga elektrik megger/麦格 高阻表 电压检测器 电力测试 麦格

megger-vf6-ex-voltage-detector

The TDR1000/3 is a hand held, compact time domain reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range depending on velocity factor selected and cable type.

Four output impedances are available (25, 50, 75, and 100 Ω) and a velocity factor between 0.2 and 0.99 will meet any cable test requirements.

The TDR1000 has a simple selection option which together with a 4 way control switch offers an intuitive operation for the user.

Backlit graphics monochrome LCD (256 x 128)

For use on Telecom TNV-3 circuit, or 150 V CAT IV power circuits

Auto selected output impedanc (between 25, 50, 75 and 100 Ω)

AUTO option selecting gain and pulse for each range

Miniature clip test lead set (1 pair) 6231-652

The TDR1000/3 is a hand held, compact time domain reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range depending on velocity factor selected and cable type.Four output impedances are available (25, 50, 75, and 100 Ω) and a velocity factor between 0.2 and 0.99 will meet any cable test requirements.The TDR1000 has a simple selection option which together with a 4 way control switch offers an intuitive operation for the user.Key Features : <ul class="md-block-unordered-list-item"><li>Backlit graphics monochrome LCD (256 x 128)</li><li>Adjustable display contrast</li><li>Resolution to 0.1 m</li><li>For use on Telecom TNV-3 circuit, or 150 V CAT IV power circuits</li><li>Power blocking filter not required</li><li>Environmental protection to IP54</li><li>Auto selected output impedanc (between 25, 50, 75 and 100 Ω)</li><li>2 ns pulse for near end fault location</li><li>AUTO option selecting gain and pulse for each range</li><li>Display distance in metres or feet</li><li>Uses five AA (LR6) primary cells</li></ul>Includes :<ul class="md-block-unordered-list-item"><li>Time Domain Reflectometer TDR1000-3</li><li>Hard case 5410-420</li><li>Miniature clip test lead set (1 pair) 6231-652</li><li>User guide CD 2002-178</li><li>Rubber boot with stand</li></ul>

The TDR1000/3 is a hand held, compact time domain reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range depending on velocity factor selected and cable type.
Four output impedances are available (25, 50, 75, and 100 Ω) and a velocity factor between 0.2 and 0.99 will meet any cable test requirements.
The TDR1000 has a simple selection option which together with a 4 way control switch offers an intuitive operation for the user.
Key Features : 
<ul>
<li>Backlit graphics monochrome LCD (256 x 128)</li>
<li>Adjustable display contrast</li>
<li>Resolution to 0.1 m</li>
<li>For use on Telecom TNV-3 circuit, or 150 V CAT IV power circuits</li>
<li>Power blocking filter not required</li>
<li>Environmental protection to IP54</li>
<li>Auto selected output impedanc (between 25, 50, 75 and 100 Ω)</li>
<li>2 ns pulse for near end fault location</li>
<li>AUTO option selecting gain and pulse for each range</li>
<li>Display distance in metres or feet</li>
<li>Uses five AA (LR6) primary cells</li>
</ul>
Includes :
<ul>
<li>Time Domain Reflectometer TDR1000-3</li>
<li>Hard case 5410-420</li>
<li>Miniature clip test lead set (1 pair) 6231-652</li>
<li>User guide CD 2002-178</li>
<li>Rubber boot with stand</li>
</ul>

Megger TDR1000/3 Advanced Handheld Time Domain Reflector

megger tdr1000/3 advanced handheld time domain reflector reflektor waktu genggam tingkat lanjut electrical power testing pengujian daya listrik pemantul masa pegang tangan lanjutan ujian tenaga elektrik megger/麦格 高级手持式时域反射仪 电力测试 麦格

megger-tdr1000-3-advanced-handheld-time-domain-reflector

Megger  Handheld Portable Appliance Testers PAT150 

Offering straight-forward, reliable and efficient appliance safety testing for portable and fixed electrical equipment, the Megger PAT150 PAT Tester is ideal for use in most environments with a low to moderate PAT testing requirement and enables you to carry out PAT testing in full compliance with the IET Code of Practice.

With additional mains powered tests available such as earth leakage testing, touch current testing and portable RCD testing, as well as test sequences for Class I, Class II appliances and extension leads, the Megger PAT150 Tester also carries out earth continuity testing at 200mA, insulation testing at either 250V or 500V and substitute leakage testing.

Additionally the Megger PAT150 provides a separate test for SELV (Safety Extra Low Voltage or Class III) appliances.

With adjustable PASS limits and user-configurable test durations, the Megger PAT150 can also null Bond lead resistance to reduce measurement errors, making it an incredibly versatile non-downloading PAT Tester.

Live circuit measurement is also available for testing the mains supply and socket polarity or electrical circuit voltage to 300V (AC).

Encased in rugged rubber armour and fitted with toughened “Gorilla” glass, the Megger PAT150 is incredibly durable and its battery powered operation makes it ideal for those locations where an electrical supply isn’t available or where a mains powered PAT tester would prove impractical.

The Megger PAT150R PAT Tester is also available which has an inbuilt battery charger, preventing the need to remove the AA batteries from the tester to recharge them externally. To purchase this model, simply select the option above.

Megger Part Number: 1003-064 / 1003-428 (rechargable model)

Complies fully with the latest version of the IET Code of Practice

Simple pass fail indication & measurement with adjustable PASS limits

Rechargeable version available (Megger PAT150R)

Includes 250V Insulation testing for surge protected extension leads.

Automatic test sequences for Class I, Class II, Extension/Power leads

10mA and 30mA Portable RCD lead testing options

Substitute and Mains powered leakage testing

<h3 class="md-block-header-three">Megger Handheld Portable Appliance Testers PAT150 </h3>Offering straight-forward, reliable and efficient appliance safety testing for portable and fixed electrical equipment, the Megger PAT150 PAT Tester is ideal for use in most environments with a low to moderate PAT testing requirement and enables you to carry out PAT testing in full compliance with the IET Code of Practice.With additional mains powered tests available such as earth leakage testing, touch current testing and portable RCD testing, as well as test sequences for Class I, Class II appliances and extension leads, the Megger PAT150 Tester also carries out earth continuity testing at 200mA, insulation testing at either 250V or 500V and substitute leakage testing.Additionally the Megger PAT150 provides a separate test for SELV (Safety Extra Low Voltage or Class III) appliances.With adjustable PASS limits and user-configurable test durations, the Megger PAT150 can also null Bond lead resistance to reduce measurement errors, making it an incredibly versatile non-downloading PAT Tester.Live circuit measurement is also available for testing the mains supply and socket polarity or electrical circuit voltage to 300V (AC).Encased in rugged rubber armour and fitted with toughened “Gorilla” glass, the Megger PAT150 is incredibly durable and its battery powered operation makes it ideal for those locations where an electrical supply isn’t available or where a mains powered PAT tester would prove impractical.The Megger PAT150R PAT Tester is also available which has an inbuilt battery charger, preventing the need to remove the AA batteries from the tester to recharge them externally. To purchase this model, simply select the option above.Megger Part Number: 1003-064 / 1003-428 (rechargable model)<h4 class="md-block-header-four">Megger PAT150 PAT Tester Key Features</h4><ul class="md-block-unordered-list-item"><li>Complies fully with the latest version of the IET Code of Practice</li><li>Simple pass fail indication &amp; measurement with adjustable PASS limits</li><li>Rugged and hard wearing design</li><li>Rechargeable version available (Megger PAT150R)</li><li>Battery powered, portable design</li><li>Includes 250V Insulation testing for surge protected extension leads.</li><li>Automatic test sequences for Class I, Class II, Extension/Power leads</li><li>10mA and 30mA Portable RCD lead testing options</li><li>Substitute and Mains powered leakage testing</li></ul>Includes : <ul class="md-block-unordered-list-item"><li>Extension lead adaptor </li><li>Mains plug test lead </li><li>Continuity/earth bond lead</li><li>SELV/mains voltage test lead Red x1 </li><li>Carry case</li></ul>

<h3>Megger Handheld Portable Appliance Testers PAT150&nbsp;</h3>
Offering straight-forward, reliable and efficient appliance safety testing for portable and fixed electrical equipment, the Megger PAT150 PAT Tester is ideal for use in most environments with a low to moderate PAT testing requirement and enables you to carry out PAT testing in full compliance with the IET Code of Practice.
With additional mains powered tests available such as earth leakage testing, touch current testing and portable RCD testing, as well as test sequences for Class I, Class II appliances and extension leads, the Megger PAT150 Tester also carries out earth continuity testing at 200mA, insulation testing at either 250V or 500V and substitute leakage testing.
Additionally the Megger PAT150 provides a separate test for SELV (Safety Extra Low Voltage or Class III) appliances.
With adjustable PASS limits and user-configurable test durations, the Megger PAT150 can also null Bond lead resistance to reduce measurement errors, making it an incredibly versatile non-downloading PAT Tester.
Live circuit measurement is also available for testing the mains supply and socket polarity or electrical circuit voltage to 300V (AC).
Encased in rugged rubber armour and fitted with toughened “Gorilla” glass, the Megger PAT150 is incredibly durable and its battery powered operation makes it ideal for those locations where an electrical supply isn’t available or where a mains powered PAT tester would prove impractical.
The Megger PAT150R PAT Tester is also available which has an inbuilt battery charger, preventing the need to remove the AA batteries from the tester to recharge them externally. To purchase this model, simply select the option above.
Megger Part Number: 1003-064 / 1003-428 (rechargable model)
<h4>Megger PAT150 PAT Tester Key Features</h4>
<ul>
<li>Complies fully with the latest version of the IET Code of Practice</li>
<li>Simple pass fail indication &amp; measurement with adjustable PASS limits</li>
<li>Rugged and hard wearing design</li>
<li>Rechargeable version available (Megger PAT150R)</li>
<li>Battery powered, portable design</li>
<li>Includes 250V Insulation testing for surge protected extension leads.</li>
<li>Automatic test sequences for Class I, Class II, Extension/Power leads</li>
<li>10mA and 30mA Portable RCD lead testing options</li>
<li>Substitute and Mains powered leakage testing</li>
</ul>
Includes : 
<ul>
<li>Extension lead adaptor&nbsp;</li>
<li>Mains plug test lead&nbsp;</li>
<li>Continuity/earth bond lead</li>
<li>SELV/mains voltage test lead Red x1&nbsp;</li>
<li>Carry case</li>
</ul>

Megger Handheld Portable Appliance Testers PAT150

megger handheld portable appliance testers pat150 penguji alat portabel genggam electrical power testing pengujian daya listrik perkakas mudah alih ujian tenaga elektrik megger/麦格 手持式便携式电器测试仪 电力测试 麦格

megger-handheld-portable-appliance-testers-pat150

Megger EVCC300 Electric Vehicle Charger Checker 

 The new EVCC300 represents a new concept in electric vehicle charger checking, providing a simple, all in one solution. This name simply means: Electric Vehicle Charger Checker 300= mode 3 chargers. 

The compact, ergonomically designed instrument allows the user to quickly ensure a charger is in a safe, working condition. This could be done prior to putting back into the user to quickly ensure a charger is in a safe, working condition. This could be done prior to putting back into use following maintenance, or simply as a regular health check to ensure everything is safe and working as it should be.

The EVCC300 is capable of checking both the safety and operation of a mode 2 and single-phase, mode 3 electric vehicle charger and does it in a simple, easy-to-use manner.

One of the benefits of the new EVCC300 is that it only sets control pilot conditions to allow other electrical tests or to observe the charger's reaction, it can also read the code received from the charger. The control pilot signal (CP) is compared with the requirements of IEC 61851-1 :2017, without the need for a separate oscilloscope.

This makes the EVCC300 a unique solution to ensuring EV charger safety and reliability. 

Checks mode 2 and single phase mode 3 (level 1 and two phase level 2) chargers

Checks chargers with SAE J17772 Type 1 and Type 2 connectors

Performs four Ev charger operation checks 

Checks to see if nuisance tripping or RCD/ GFCI is likely to occur

Read control pilot state response from EV Charger to IEC61852-1 

Megger EVCC300 Electric Vehicle Charger Checker The new EVCC300 represents a new concept in electric vehicle charger checking, providing a simple, all in one solution. This name simply means: Electric Vehicle Charger Checker 300= mode 3 chargers. The compact, ergonomically designed instrument allows the user to quickly ensure a charger is in a safe, working condition. This could be done prior to putting back into the user to quickly ensure a charger is in a safe, working condition. This could be done prior to putting back into use following maintenance, or simply as a regular health check to ensure everything is safe and working as it should be.The EVCC300 is capable of checking both the safety and operation of a mode 2 and single-phase, mode 3 electric vehicle charger and does it in a simple, easy-to-use manner.One of the benefits of the new EVCC300 is that it only sets control pilot conditions to allow other electrical tests or to observe the charger&#x27;s reaction, it can also read the code received from the charger. The control pilot signal (CP) is compared with the requirements of IEC 61851-1 :2017, without the need for a separate oscilloscope.This makes the EVCC300 a unique solution to ensuring EV charger safety and reliability.  Key Features:<ul class="md-block-unordered-list-item"><li>Checks mode 2 and single phase mode 3 (level 1 and two phase level 2) chargers</li><li>Checks chargers with SAE J17772 Type 1 and Type 2 connectors</li><li>Performs four EV charger safety checks</li><li>Performs four Ev charger operation checks </li><li>Checks to see if nuisance tripping or RCD/ GFCI is likely to occur</li><li>Read control pilot state response from EV Charger to IEC61852-1 </li></ul>

Megger EVCC300 Electric Vehicle Charger Checker 
&nbsp;The new EVCC300 represents a new concept in electric vehicle charger checking, providing a simple, all in one solution. This name simply means: Electric Vehicle Charger Checker 300= mode 3 chargers. 
The compact, ergonomically designed instrument allows the user to quickly ensure a charger is in a safe, working condition. This could be done prior to putting back into the user to quickly ensure a charger is in a safe, working condition. This could be done prior to putting back into use following maintenance, or simply as a regular health check to ensure everything is safe and working as it should be.
The EVCC300 is capable of checking both the safety and operation of a mode 2 and single-phase, mode 3 electric vehicle charger and does it in a simple, easy-to-use manner.
One of the benefits of the new EVCC300 is that it only sets control pilot conditions to allow other electrical tests or to observe the charger's reaction, it can also read the code received from the charger. The control pilot signal (CP) is compared with the requirements of IEC 61851-1 :2017, without the need for a separate oscilloscope.
This makes the EVCC300 a unique solution to ensuring EV charger safety and reliability. 
&nbsp;Key Features:
<ul>
<li>Checks mode 2 and single phase mode 3 (level 1 and two phase level 2) chargers</li>
<li>Checks chargers with SAE J17772 Type 1 and Type 2 connectors</li>
<li>Performs four EV charger safety checks</li>
<li>Performs four Ev charger operation checks </li>
<li>Checks to see if nuisance tripping or RCD/ GFCI is likely to occur</li>
<li>Read control pilot state response from EV Charger to IEC61852-1 </li>
</ul>

Megger EVCC300 Electric Vehicle Charger Checker

megger evcc300 electric vehicle charger checker pemeriksa pengisi daya kendaraan listrik electrical power testing pengujian pengecas kenderaan elektrik ujian tenaga megger/麦格 电动汽车充电器检查器 电力测试 麦格